1. Introduktion
Thank you for choosing the Scheppach HC63 oil-lubricated air compressor. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new compressor. Please read this manual thoroughly before operating the device and keep it for future reference.
The Scheppach HC63 is a powerful and versatile air compressor designed for a wide range of applications around the home, workshop, or garage, featuring a 50-liter tank, 10 bar working pressure, and a 1500W motor.
2. Sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af udstyret:
- Sørg for, at kompressoren er placeret på en stabil, plan overflade.
- Betjen ikke kompressoren i vådt eller damp forhold.
- Always wear appropriate personal protective equipment (PPE), such as safety glasses and hearing protection.
- Before any maintenance or cleaning, disconnect the compressor from the power supply and ensure the tank is depressurized.
- Ret ikke trykluft mod mennesker eller dyr.
- Regularly check all hoses and connections for damage or leaks.
- Hold børn og uautoriserede personer væk fra driftsområdet.
3. Produktkomponenter
The Scheppach HC63 compressor comes with the following main components:
Image: The Scheppach HC63 air compressor, showing its blue tank, black motor housing, wheels, and pressure gauges.
- Kompressor enhed
- Trykreduktion
- Hurtigkobling
- Transport Device (Wheels and Handle)
- Oil Bottle (for initial fill/refill)
4. Opsætning og første samling
Follow these steps for the initial setup of your compressor:
- Udpakning: Carefully remove all components from the packaging. Check for any transport damage.
- Hjulsamling: Attach the wheels to the designated axles on the compressor frame. Secure them with the provided fasteners.
- Håndtagssamling: Mount the transport handle to the compressor body.
- Oliepåfyldning: The compressor is shipped without oil. Fill the crankcase with the supplied compressor oil to the indicated level on the dipstick. Do not overfill.
- Placering: Position the compressor on a firm, level surface in a well-ventilated area. Ensure sufficient clearance around the unit for air circulation.
- Elektrisk tilslutning: Connect the compressor to a suitable grounded power outlet (230 Volt). Ensure the power switch is in the 'OFF' position before plugging in.
Image: The Scheppach HC63 compressor positioned in a workshop, ready for use after assembly.
5. Betjeningsvejledning
The Scheppach HC63 compressor is designed for various pneumatic applications. Here's how to operate it:
- Tænd: Turn the main power switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum operating pressure (10 bar) and then automatically shut off.
- Tilslut luftværktøj: Attach your pneumatic tool to the quick coupling.
- Juster tryk: Use the pressure reducer knob to set the desired working pressure for your tool. Monitor the pressure gauge to ensure accurate setting.
- Operation: Begin using your pneumatic tool. The compressor will automatically restart when the tank pressure drops below a certain level.
- Sluk: After use, turn the main power switch to 'OFF'.
- Depressurize Tank: Open the drain valve at the bottom of the tank to release any remaining air pressure and drain condensed water. This is crucial for tank longevity.
Typiske applikationer:
Billede: Eksamples of applications for the Scheppach HC63 compressor, such as nailing, using an impact wrench, paint spraying, tire inflation, air ratcheting, orbital sanding, and sandblasting.
Image: A user inflating a car tire, demonstrating the compressor's utility for vehicle maintenance.
Image: A user operating a pneumatic nail gun, showcasing the compressor's capability for fastening tasks.
6. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your Scheppach HC63 compressor:
- Daglig: Drain condensed water from the air tank. This prevents rust and corrosion.
- Weekly/After 20 Hours of Operation: Kontroller oliestanden og efterfyld om nødvendigt.
- Monthly/After 50 Hours of Operation: Clean or replace the air filter. A clogged filter reduces efficiency.
- Every 3 Months/After 100 Hours of Operation: Change the compressor oil. Use only recommended compressor oil.
- Årligt: Inspect all connections, hoses, and valves for leaks or damage. Tighten loose fittings.
Image: An icon symbolizing low maintenance, indicating the ease of care for the compressor.
7. Fejlfinding
Se tabellen nedenfor for almindelige problemer og deres mulige løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Kompressoren starter ikke. | No power supply; Thermal overload protection activated. | Check power connection; Allow compressor to cool down. |
| Kompressoren kører kontinuerligt. | Air leak in system; Pressure switch faulty. | Check all connections for leaks; Contact service. |
| Low air pressure output. | Clogged air filter; Air leak; Worn piston rings. | Clean/replace air filter; Check for leaks; Contact service. |
| Overdreven støj under drift. | Loose components; Low oil level; Worn bearings. | Tighten all fasteners; Check oil level; Contact service. |
8. Tekniske specifikationer
Key technical data for the Scheppach HC63 Air Compressor:
| Feature | Værdi |
|---|---|
| Model | HC63 |
| Strømindgang | 1500 W |
| Voltage | 230 V |
| Tankvolumen | 50 L |
| Maks. Arbejdstryk | 10 bar |
| Sugekapacitet | 220 l/min |
| Støjniveau | 97 dB |
| Drevtype | ledning |
Image: Visual representation of key specifications: 10 bar maximum working pressure, 220 L/min suction capacity, quick coupling, and 50 L tank volume.
9. Garanti og support
Scheppach products are manufactured with high-quality materials and undergo strict quality controls. In the unlikely event of a defect, please refer to your purchase documentation for warranty terms and conditions. For technical support or spare parts, please contact your authorized Scheppach dealer or visit the official Scheppach website for service contact information.
