1. Produktet er slutview
This manual provides instructions for the installation and maintenance of the YITAMOTOR Fender Flares Kit. These fender flares are designed to provide additional tire coverage and protection for your vehicle's wheel wells.
The fender flares are constructed from high-quality polypropylene (PP) material, engineered for durability and resistance to deformation, shrinkage, and cracking, even in various climates. They feature a smooth black finish and are UV-resistant. The flares can also be painted to match your vehicle's color preferences.
Image: Four individual YITAMOTOR fender flares, showcasinproduktdesignet.
2. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- 1 x Fender Flares Kit (4 pieces: 2 front, 2 rear)
- 1 x Set of Mounting Hardware (including 304 stainless steel screws)
- 1 x Brugsanvisning (dette dokument)
3. Produktspecifikationer
| Attribut | Detalje |
|---|---|
| Mærke | YITAMOTOR |
| Modelnummer | MAYIM2msJi |
| Materiale | Polypropylen (PP) |
| Udvendig finish | Glat sort |
| Farve | Black (Paintable) |
| Varens vægt | 16.54 pund |
| Produktmål (L x B x H) | 49.21 x 11.02 x 31.69 tommer |
| Tilpasningstype | Køretøjsspecifik pasform |
| Type køretøjstjeneste | 2019-2024 Chevy Silverado 1500 (Excl. 2019 LD) |
Image: Technical drawing illustrating the dimensions of the front and rear fender flares.
4. Installationsvejledning
Follow these steps for proper installation of your YITAMOTOR Fender Flares. No cutting is required for installation.
4.1. Forinstallation
- Efterse komponenter: Unpack the fender flares and mounting hardware. Verify all parts are present and undamaged.
- Clean Vehicle Surface: Thoroughly clean the area around the wheel wells where the fender flares will be installed. Ensure surfaces are free of dirt, debris, and wax.
- Testpasform: Temporarily hold each fender flare against its corresponding wheel well to ensure proper alignment and fitment before permanent installation.
Image: A person bending a fender flare to show its flexible material, aiding in installation.
4.2. Mounting Process
- Justér og fastgør: Position the fender flare onto the wheel well. The flares are designed with pre-drilled slots and holes that align with existing mounting points on your vehicle.
- Installer hardware: Use the provided 304 stainless steel screws and other mounting hardware to secure the fender flares. Ensure all bolts are tightened securely but do not overtighten to avoid damaging the flares or vehicle.
- Repeat for All Flares: Follow the same procedure for installing the remaining three fender flares.
Image: A hand indicating the precise fitment of a fender flare on a truck's wheel well.
Billede: Et nærbillede view of a bolt head securing the fender flare, highlighting the bolt-riveted design.
4.3. Efterinstallation
After installation, double-check all mounting points to ensure the flares are securely attached and there are no loose components.
Image: A truck with YITAMOTOR fender flares installed, illustrating the 'no cutting installation' and the smooth black finish.
5. Brug og funktioner
The YITAMOTOR Fender Flares are designed to enhance your vehicle's appearance and provide practical benefits:
- Wheel Well Protection: Shields your wheel wells from mud, scratches, and other road debris, especially during off-road driving.
- Holdbar konstruktion: Made from high-impact thermoplastic, resistant to extreme weather conditions, ensuring long-lasting performance.
- Paintable Surface: The smooth black coating allows for custom painting to match or complement your vehicle's color.
Image: A side-by-side comparison showing a truck's wheel well before and after fender flare installation, demonstrating protection from rust and damage.
Image: A fender flare being painted blue, illustrating the product's paintable surface for customization.
6. Vedligeholdelse
To maintain the appearance and longevity of your fender flares:
- Regelmæssig rengøring: Wash the fender flares regularly with mild soap and water to remove dirt, mud, and road grime.
- Undgå barske kemikalier: Do not use abrasive cleaners or harsh chemicals that could damage the finish or material.
- Inspicer med jævne mellemrum: Periodically check the mounting hardware for tightness and ensure the flares remain securely attached.
Image: A person cleaning a fender flare on a truck with a pressure washer, demonstrating routine maintenance.
7. Fejlfinding
If you encounter any issues during or after installation, consider the following:
- Løs pasform: Ensure all mounting hardware is correctly installed and tightened. Re-check alignment.
- Manglende dele: Refer to the 'Package Contents' section. If parts are missing, contact YITAMOTOR customer support.
- Problemer med tilpasning: Double-check your vehicle's year, make, and model against the product's compatibility information.
8. Garanti og support
For warranty information or technical assistance, please refer to the official YITAMOTOR webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.
