Indledning
The ENGO E901 Programmable Wired Thermostat is designed to provide precise control over your home’s heating system. This versatile thermostat is suitable for managing central heating, offering easy wired boiler control for various systems including combi gas boilers, oil boilers, and heat pumps. It allows for the creation of personalized heating schedules to enhance comfort and energy efficiency. The E901 connects directly to your boiler, functioning as a reliable wired boiler control thermostat. It features selectable control algorithms, including hysteresis or TPI, to optimize boiler performance and reduce energy consumption. The thermostat supports 6 time and temperature change points daily, which can be customized for each day of the week through its intuitive programming process.
Figure 1: The ENGO E901 Wired Thermostat, showing its clear digital display and compact design.
Figure 2: The ENGO E901 thermostat is compatible with Combi Boilers, Oil Boilers, and Underfloor Heating systems.
Opsætning og installation
Strømforsyning
The ENGO E901 thermostat is battery-powered, requiring 2xAA batteries for operation. Ensure batteries are inserted correctly according to polarity markings.
Ledningsforbindelser
The E901 is a 2-wire heating thermostat designed for wired connection to your heating system. Refer to the detailed connection diagrams below for proper installation with different boiler types.
Figure 3: Technical information and connection diagrams for the ENGO E901 thermostat, including setups for gas boilers, pumps/actuators, and control boxes. Always consult a qualified electrician for installation if unsure.
Montering
The thermostat is designed for surface mounting. Choose a suitable location away from direct sunlight, drafts, or heat sources that could affect temperature readings. Ensure the mounting surface is flat and stable.
Betjeningsvejledning
The ENGO E901 features a hidden button panel for easy programming and adjustments. Slide the front cover down to reveal the control buttons.
Figure 4: The ENGO E901 thermostat with its hidden button panel revealed, showing the various control buttons for programming and mode selection.
Indstilling af tid og dato
Upon initial setup or after battery replacement, you may need to set the current time and day. Refer to the specific instructions in the full manual for navigating the menu to adjust these settings.
Programmering skemaer
The thermostat allows for 6 time and temperature change points for each day of the week. This enables you to create a heating schedule that aligns with your daily routine. Use the programming buttons to set desired temperatures at specific times throughout the day.
- Ferietilstand: Activate this mode when you are away for an extended period to maintain a lower, energy-saving temperature.
- Boost (Party) Mode: Temporarily override the current schedule to achieve a higher temperature for a short duration, ideal for unexpected needs.
Kontrolalgoritmer
The E901 offers a choice between hysteresis and TPI (Time Proportional & Integral) control algorithms. These algorithms optimize boiler cycling to maintain stable temperatures and improve energy efficiency. Consult the full manual for details on selecting and understanding these modes.
Opretholdelse
Udskiftning af batteri
When the battery indicator appears on the display, replace the 2xAA batteries promptly to ensure continuous operation. Open the battery compartment, remove old batteries, and insert new ones, observing correct polarity.
Rensning
Clean the thermostat's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the unit, as this may damage the casing eller interne komponenter.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skærmen er tom eller svag. | Lave eller døde batterier. | Replace the 2xAA batteries. |
| Varmesystemet reagerer ikke. | Incorrect wiring; boiler issue; thermostat not in heating mode. | Check wiring connections (refer to Setup section). Ensure boiler is operational. Verify thermostat is in an active heating mode. |
| Difficulty with programming. | Unfamiliarity with programming steps. | Review the "Operating Instructions" section and consult the full online manual or YouTube tutorials for detailed guidance. |
| Upræcis temperaturaflæsning. | Thermostat located near heat sources, drafts, or direct sunlight. | Relocate the thermostat to a more suitable position, away from external influences. |
Specifikationer
- Mærke: ENGO
- Modelnummer: E901
- Farve: Hvid
- Produktdimensioner: 2.2 x 8.4 x 5 cm
- Varens vægt: 320 g
- Strømforsyning: 2 x AA batterier
- Voltage: 230 Volts (for connected system, thermostat is battery powered)
- Materiale: Plast
- Særlige funktioner: Programmable, Vacation Mode, Lockable
- Controller type: Tryk knap
- Output kontrol: NO/COM (voltage-frit relæ)
- Temperaturindstillingsområde: 5°C til 35°C
- Displaybaggrundsbelysning: Ja
- Kontrolalgoritme: TPI or Hysteresis (±0.25°C or ±0.5°C)
- Meddelelse: Kablet
Garanti og support
Garanti
The ENGO E901 thermostat comes with a 5 års producentgarantiGem venligst din købsbevis i tilfælde af garantikrav.
Kundesupport
For any assistance with installation, setup, or troubleshooting, ENGO Controls offers dedicated support:
- Telephone or Email Support: Direct support is available via phone or email. Contact details can be found on the official ENGO Controls webwebsted.
- YouTube-vejledninger: Comprehensive video tutorials are available on YouTube for installation and setup assistance. Søg efter "ENGO E901" on YouTube.
- Online manual: An instruction manual is included with the product and is also available online for detailed reference.
