SEALIGHT X1 HB3/9005 LED Fog Light Bulb User Manual

1. Introduktion

Thank you for choosing SEALIGHT X1 HB3/9005 LED Fog Light Bulbs. These bulbs are designed to provide superior illumination and enhanced visibility for your vehicle, especially in challenging conditions like fog or off-road environments. Featuring a 1:1 size design for easy fit and an intelligent cooling system, the SEALIGHT X1 bulbs offer stable, bright light without flickering or dark spots, contributing to safer night driving.

SEALIGHT X1 HB3/9005 LED Fog Light Bulbs and packaging

Figure 1.1: SEALIGHT X1 HB3/9005 LED Fog Light Bulbs and their packaging.

2. Sikkerhedsoplysninger

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

Always disconnect the vehicle's battery before performing any electrical work to prevent electric shock.
Brug passende personlige værnemidler, såsom sikkerhedsbriller og handsker, under installationen.
Ensure the vehicle's engine is off and cooled down before handling bulbs, as they can be hot.
Rør ikke direkte ved LED-chipsene, da olier fra din hud kan reducere deres levetid.
Verify that the bulb type (HB3/9005) is compatible with your vehicle's headlight or fog light housing before installation.
Opbevar pærer utilgængeligt for børn.
Bortskaf gamle pærer ansvarligt i henhold til lokale regler.

3. Pakkens indhold

The SEALIGHT X1 HB3/9005 LED Fog Light Bulb package typically includes the following items:

2 x SEALIGHT X1 HB3/9005 LED Fog Light Bulbs
Brugervejledning (dette dokument)

Note: Contents may vary slightly depending on the specific product variant or region.

4. Installationsvejledning

The SEALIGHT X1 HB3/9005 LED bulbs are designed for a quick and easy plug-and-play installation, typically taking around 10 minutes. No additional tools or modifications are usually required for most vehicles.

4.1 Før du begynder

Ensure your vehicle is turned off and the engine is cool.
Locate your vehicle's existing HB3/9005 fog light or headlight bulbs. Consult your vehicle's owner's manual if needed.
Confirm the bulb type is HB3/9005.

4.2 Installationstrin

Afbryd strømmen: Carefully disconnect the electrical connector from the back of the existing bulb.
Fjern gammel pære: Twist or unclip the old HB3/9005 halogen bulb from its housing. Remove it gently.
Isæt ny LED-pære: Take the SEALIGHT X1 HB3/9005 LED bulb. Align the tabs on the LED bulb with the slots in the vehicle's housing. Insert the LED bulb and twist or secure it until it is firmly seated. Ensure the LED chips are facing horizontally (3 and 9 o'clock positions) for optimal beam pattern.
Tilslut elektrisk stik: Reconnect the vehicle's electrical connector to the new SEALIGHT X1 LED bulb. The bulbs are non-polarity sensitive, meaning they will work regardless of connector orientation.
Test funktionalitet: Turn on your vehicle's lights to test the new LED bulbs. Ensure both bulbs illuminate correctly and there are no error messages on your dashboard.

Diagram showing 10 minute easy installation steps for LED bulbs

Figure 4.1: Visual guide for the simple plug-and-play installation process.

Illustration of LED chip positioning for optimal light beam

Figure 4.2: Proper positioning of LED chips ensures a usable and glare-free beam pattern.

5. Betjeningsvejledning

Once installed, the SEALIGHT X1 HB3/9005 LED bulbs operate automatically with your vehicle's lighting system. They are designed to provide immediate full brightness without any warm-up time.

Simply turn on your vehicle's fog lights or headlights as you normally would.
The bulbs will provide a bright, clear white light, significantly improving visibility compared to standard halogen bulbs.
The advanced cooling system ensures stable performance and quiet operation.

Comparison of visibility with SEALIGHT LED bulbs versus halogen bulbs, showing extended range

Figure 5.1: Enhanced visibility and safety provided by SEALIGHT X1 LED bulbs, allowing earlier detection of obstacles.

6. Vedligeholdelse

SEALIGHT X1 HB3/9005 LED bulbs are designed for long-term reliability and require minimal maintenance. Their durable construction and efficient cooling system contribute to an extended lifespan of up to 50,000 hours.

Rensning: If necessary, gently wipe the bulb's surface with a clean, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
Inspektion: Kontrollér pærerne med jævne mellemrum for tegn på skader eller løse forbindelser.
Ingen dele, der kan serviceres af brugeren: Do not attempt to disassemble or modify the bulbs. This will void the warranty and may cause damage.

Graphic illustrating the extended lifespan of SEALIGHT LED bulbs compared to halogen bulbs

Figure 6.1: SEALIGHT LED bulbs offer a significantly longer lifespan, reducing the frequency of replacements.

Diagram showing the 360-degree hollow-carved design of the heatsink for efficient cooling

Figure 6.2: The intelligent cooling system ensures optimal performance and longevity without fan noise.

7. Fejlfinding

If you encounter issues with your SEALIGHT X1 HB3/9005 LED bulbs, refer to the following common problems and solutions:

Problem	Mulig årsag	Løsning
Pæren lyser ikke.	Loose connection, incorrect installation, faulty bulb.	Check if the electrical connector is securely attached. Ensure the bulb is fully seated and locked into the housing. Test the bulb in another compatible vehicle or socket if possible.
Flickering or intermittent light.	CANBUS system incompatibility (rare for X1), loose connection.	Sørg for, at forbindelserne er sikre. The SEALIGHT X1 is designed to be compatible with 99% of vehicles without additional adapters. If flickering persists, consult SEALIGHT customer support.
Dashboard error message ("bulb out").	Vehicle's CANBUS system detects lower power draw from LED.	The X1 series is designed to minimize this. If an error occurs, it can often be cleared by pressing "OK" on the steering wheel (as noted in customer reviews). If persistent, a CANBUS decoder may be required for some sensitive vehicles (though rare for this model).
Light beam pattern is incorrect or scattered.	Bulb not oriented correctly in housing.	Ensure the LED chips are facing horizontally (3 and 9 o'clock positions) when installed. Re-adjust if necessary.

Image showing various vehicle types (SUV, Van, Car, Pickup) and the CANBUS compatibility of the LED bulb

Figure 7.1: SEALIGHT X1 bulbs are designed for broad compatibility, minimizing error codes and flickering.

8. Specifikationer

Feature	Detalje
Model	X1 FOG LIGHT
Pære type	HB3/9005
Lyskilde	LED
Farvetemperatur	Hvid
Lumen output	30,000LM (per pair, estimated)
Levetid	Op til 50,000 timer
Kølesystem	Anodized aluminum heatsink, 360° hollow-carved design (fanless)
Vandtæt vurdering	IP67 (as per product features)
Operation Voltage	Vehicle specific fit
Producentens varenummer	7823LHB0209US

9. Garanti og support

SEALIGHT products are built with quality and reliability in mind. For specific warranty information regarding your SEALIGHT X1 HB3/9005 LED bulbs, please refer to the warranty card included with your purchase or visit the official SEALIGHT webwebsted.

For technical support, troubleshooting assistance, or any inquiries, please contact SEALIGHT customer service through their official channels. You can often find contact information on the product packaging or on the SEALIGHT Amazon Store.

	SEALIGHT Scoparc S6 LED-forlygtepære installationsvejledning og brugermanual Omfattende vejledning til installation og brug af SEALIGHT Scoparc S6 LED-forlygtepærer. Indeholder produktspecifikationer, installationsvejledning til forskellige modeller, fejlfindingstips og garantioplysninger.
	Installations- og brugervejledning til SEALIGHT LED-forlygtesæt Omfattende brugermanual til SEALIGHT LED-forlygtesættet, der dækker installation, produktspecifikationer og fejlfinding for modellerne 9005/HB3 og 9006/HB4. Har CSP LED'er, farvetemperatur 6000K-6500K og vandtæthedsklassificering IP67.
	Installations- og brugermanual for Sealight S2S LED-forlygtepære Omfattende vejledning til installation og brug af Sealight S2S LED-forlygtepærer, inklusive produktspecifikationer, installationsvejledning, fejlfindingstips og garantioplysninger.
	SEALIGHT S2 LED-belysning brugermanual - installation, funktioner og specifikationer Omfattende brugermanual til SEALIGHT S2 LED-belysning. Dækker produktintroduktion, funktioner, detaljerede specifikationer, installationsvejledning til forskellige modeller, ofte stillede spørgsmål om fejlfinding og garantioplysninger.
	SEALIGHT Xenower X4 LED-forlygtepærer brugermanual og installationsvejledning Omfattende brugermanual og installationsvejledning til SEALIGHT Xenower X4 LED-forlygtepærer, der dækker produktintroduktion, specifikationer, brugervejledninger, detaljerede installationstrin for forskellige modeller, forslag, ofte stillede spørgsmål og garantioplysninger.
	SEALIGHT LED -forlygtersæt brugervejledning Brugermanual til SEALIGHT LED-forlygtesættet, inklusive produktspecifikationer, installationsvejledning og tips til fejlfinding.

SEALIGHT X1 FOG LIGHT (HB3/9005)