Greencycle 15 Amp USB Electrical Outlet Instruction Manual

1. Introduktion

This manual provides essential instructions for the safe installation, operation, and maintenance of your Greencycle 15 Amp USB Electrical Outlet. Please read this manual thoroughly before installation and retain it for future reference.

The Greencycle 4-in-1 Receptacle combines two standard 15A 125V AC outlets with two 5V 2A USB charging ports, offering a convenient solution for powering and charging multiple devices simultaneously.

2. Sikkerhedsoplysninger

ADVARSEL: Risk of electric shock. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installation or servicing.

• Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring.
• Ensure the power supply is disconnected before working on electrical circuits.
• Denne enhed er kun designet til indendørs brug.
• Do not exceed the maximum electrical rating of 15A 125V AC (1800 Watts).
• The USB ports provide 5V DC, 2A total output. Do not attempt to connect devices requiring higher voltage eller nuværende.
• Tamper-Resistant (TR) outlets feature an internal shutter mechanism to prevent insertion of foreign objects, enhancing child safety.
• Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.

3. Pakkens indhold

• Greencycle USB Electrical Outlet (Quantity as purchased)
• Matching Wall Plate (Screws included)

4. Produktfunktioner

• 4-i-1 design: To 15 Amp 125V AC outlets and two 5V 2A USB charging ports.
• Broad USB Compatibility: Compatible with USB 1.1/2.0/3.0 devices, including smartphones, tablets, and e-readers.
• Smart opladningsteknologi: Built-in chips assess device needs for optimal power delivery and protection against overcharging.
• Tamper-Resistant (TR): Internal shutter mechanism for enhanced safety.
• Nem installation: Supports both back and side wiring. Fits standard in-wall outlet boxes and decorator wall plates.
• ETL Certificeret: Meets strict safety standards.

5. Specifikationer

6. Installationsvejledning

Før du begynder: Ensure power is OFF at the circuit breaker. Use appropriate safety gear.

1. Sluk for strømmen: Locate the circuit breaker controlling the outlet you wish to replace and switch it to the OFF position. Verify power is off using a voltage tester.
2. Fjern gammel stikkontakt: Unscrew and carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wire was connected to which terminal (hot, neutral, ground).
3. Forbered ledninger: If necessary, strip approximately 1/2 inch of insulation from the ends of the wires.
4. Connect Wires to New Outlet: The Greencycle outlet supports both side-wiring (wrapping wires around screws) and back-wiring (inserting wires into holes and tightening screws).
   • Tilslut grøn eller bar kobberjordledning til grøn jordskrue.
   • Tilslut white neutral wire til silver screw terminal.
   • Tilslut black or colored hot wire til brass screw terminal.
   

   Image: Plug-in Wiring Steps. This diagram illustrates the four steps for connecting wires to the outlet: 1. Loosen the screw, 2. Press the screw (for back-wiring), 3. Insert the wire, 4. Tighten the screw clockwise to secure the connection.
5. Secure Outlet: Carefully fold the wires into the electrical box and secure the new outlet to the box using the provided screws.
6. Installer vægplade: Attach the new wall plate over the outlet.
7. Gendan strøm: Turn the power back ON at the circuit breaker. Test the AC outlets and USB ports to ensure proper function.

Image: Outlet Dimensions. This image provides approximate measurements of the outlet, confirming its compatibility with standard wall plates and electrical boxes.

7. Betjening

Using your Greencycle USB Electrical Outlet is straightforward:

• AC stikkontakter: Plug any standard 125V AC appliance or device into the two three-prong receptacles. Ensure the device's power requirements do not exceed 15A or 1800 Watts.
• USB -opladningsporte: Connect your USB-powered devices (e.g., smartphones, tablets) directly to the USB-A ports using a compatible USB cable. The ports provide a total of 5V DC, 2A.

Image: Direct USB Charging. This image illustrates how to charge two USB devices simultaneously without requiring bulky adapters, simplifying your charging setup.

Image: Device Compatibility. This image visually represents the wide range of devices compatible with the Greencycle outlet, including household appliances and personal electronics.

8. Vedligeholdelse

• Rensning: To clean the outlet, ensure power is off at the circuit breaker. Wipe the surface with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Inspektion: Periodically inspect the outlet and wall plate for any signs of damage, cracks, or loose connections. If damage is found, turn off power and replace the unit.
• Overbelastningsbeskyttelse: Avoid overloading the AC outlets or USB ports beyond their specified ratings to prevent damage and ensure safety.

9. Fejlfinding

10. Garanti og support

Greencycle provides a 1 års garanti for this product, covering defects in materials and workmanship from the date of purchase. This warranty does not cover damage caused by improper installation, misuse, abuse, or unauthorized modifications.

For technical support or warranty claims, please contact Greencycle customer service through the retailer where the product was purchased or visit the official Greencycle webwebsted.