Klarstein Ventimate 60cm emhætte brugsanvisning

1. Introduktion

Thank you for choosing the Klarstein Ventimate 60cm Drawer Hood. This appliance is designed to efficiently remove cooking odors and steam from your kitchen, ensuring a fresh and clean environment. Featuring a modern touch control panel, three fan speeds, and versatile operation modes (extraction or recirculation), this hood combines performance with user-friendly design. Please read this manual thoroughly before installation and operation to ensure proper use and maintenance.

2. Sikkerhedsinstruktioner

To prevent personal injury or damage to the appliance, please observe the following safety precautions:

• Sørg for, at strømforsyningen matcher voltage angivet på mærkatet.
• Installationen skal udføres af en kvalificeret tekniker i overensstemmelse med lokale regler.
• Brug ikke emhætten, hvis netledningen eller stikket er beskadiget.
• Afbryd altid apparatet fra strømforsyningen før rengøring eller vedligeholdelse.
• Maintain a minimum distance between the hood and the cooking surface as specified in the installation section.
• Rengør regelmæssigt fedtfiltre for at undgå brandfare.
• Der må ikke flamberes under emhætten.
• Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed.
• Sørg for tilstrækkelig ventilation i rummet, når emhætten bruges samtidig med apparater, der bruger gas eller andre brændstoffer.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede:

• Klarstein Ventimate Drawer Hood unit
• Aluminiumsfedtfilter(e)
• Carbon odor filter(s) (for recirculation mode)
• Monteringsudstyr (skruer, beslag osv.)
• Instruktionsmanual

4. Tekniske specifikationer

5. Installation

The Klarstein Ventimate drawer hood is designed for integration into a 60cm wide kitchen cabinet. Careful measurement is crucial for proper fit. Due to the precise dimensions, ensure your cabinet's internal width accommodates the hood without obstruction. If you are unsure about the installation process, it is recommended to consult a professional installer.

5.1 Montering af emhætten

1. Forbered kabinettet: Ensure the cabinet opening is correctly sized for the hood (approx. 59.8 cm width).
2. Bestem installationshøjde: For optimal performance, the hood should be installed at a specific distance above the cooking surface. A common recommendation is 60-65 cm (23.6-25.6 inches) above electric hobs and 65-75 cm (25.6-29.5 inches) above gas hobs. Installing too high may reduce extraction efficiency.
3. Secure the Hood: Insert the hood into the cabinet opening. Use the provided mounting hardware to secure the hood firmly to the cabinet structure. Refer to the detailed diagrams in the printed manual for specific screw locations and bracket usage.
4. Connect Ducting (Extraction Mode): If using extraction mode, connect appropriate ducting (not included) from the hood's outlet to an external vent. Ensure the ducting is as short and straight as possible for maximum efficiency.
5. Install Carbon Filters (Recirculation Mode): If using recirculation mode, ensure the carbon filters are correctly installed. These filters purify the air before returning it to the kitchen.
6. Elektrisk tilslutning: Connect the hood to a suitable power outlet. Ensure the connection is secure and meets all electrical safety standards.

Vigtig bemærkning: Some users have reported challenges with cabinet fit and securing the hood. Double-check all measurements and ensure the hood is stable before final use. The provided instructions for securing the hood may require careful attention to detail.

This image displays the Klarstein Ventimate 60cm drawer hood in black, viewed from below and slightly to the side. The extendable panel is pulled out, revealing the touch control interface with illuminated symbols for power, fan speed, and lighting. The LED lights are visible on the underside of the hood, and the metallic grease filter is partially visible behind the panel.

6. Betjening

The Klarstein Ventimate hood features an intuitive touch control panel located on the extendable front flap.

6.1 Grundlæggende funktioner

• Extend the Flap: Gently pull the front panel of the hood outwards to activate the appliance and reveal the touch controls.
• Tænd/sluk: Tryk på tænd/sluk-symbolet (O) to turn the hood on or off.
• Justering af blæserhastighed: Use the '+' and '-' symbols to cycle through the three available fan speeds (1, 2, 3). The current speed will be displayed.
• LED belysning: Touch the light bulb symbol (💡) to turn the integrated LED lighting on or off. The 6500K LED lights provide clear illumination of your cooking area.
• Retract the Flap: Push the front panel back into the cabinet to turn off the hood and conceal the controls.

7. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your hood.

7.1 Rengøring af fedtfiltre

Aluminiumsfedtfiltrene bør rengøres regelmæssigt (cirka hver 2.-4. uge, afhængigt af brugen) for at forhindre fedtophobning og opretholde udsugningseffektiviteten.

1. Afbryd strømmen: Always switch off and unplug the hood before cleaning.
2. Fjern filtre: Locate the release latches on the grease filters and carefully remove them.
3. Rens filtre: The aluminum grease filters are dishwasher-safe. Alternatively, wash them by hand in hot water with a mild detergent. Rinse thoroughly and allow them to dry completely before reinstallation.
4. Geninstaller filtre: Insert the dry filters back into their slots, ensuring they click securely into place.

7.2 Replacing Carbon Odor Filters (Recirculation Mode)

If your hood is operating in recirculation mode, the carbon odor filters need to be replaced periodically (typically every 3-6 months, depending on usage and cooking habits). These filters cannot be washed.

1. Afbryd strømmen: Switch off and unplug the hood.
2. Remove Grease Filters: Follow the steps above to remove the aluminum grease filters.
3. Remove Old Carbon Filters: The carbon filters are usually attached to the motor housing. Follow the specific instructions in your printed manual to detach them.
4. Install New Carbon Filters: Attach the new carbon filters, ensuring they are securely fitted.
5. Reinstall Grease Filters: Place the aluminum grease filters back into position.

7.3 Rengøring af ydersiden

Wipe the exterior surfaces of the hood with a soft cloth dampened with mild detergent. Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.

8. Fejlfinding

Før du kontakter kundesupport, bedes du kontrollere følgende almindelige problemer:

9. Garanti og support

Klarstein products are manufactured with quality and reliability in mind. For warranty information, please refer to the warranty card included with your purchase or visit the official Klarstein website. If you encounter any issues that cannot be resolved using the troubleshooting guide, or require spare parts, please contact Klarstein customer support or your authorized dealer for assistance.

Fabrikant: Klarstein

Webwebsted: www.klarstein.com