Fenix ​​LD45R 2800 Lumen Zoombar USB-C Genopladelig Lommelygte Brugermanual

1. Introduktion

The Fenix LD45R is a high-performance, rechargeable flashlight designed for various applications including outdoor activities, search and rescue, and general utility. It features a maximum output of 2800 lumens, a stepless adjustable focus between spotlight and floodlight, and an OLED display for real-time information. This manual provides detailed instructions for the proper use, maintenance, and care of your Fenix LD45R flashlight.

Billede 1.1: The Fenix LD45R flashlight, showcasing its design, included USB-C charging cable, and a battery organizer.

2. Pakkens indhold

Kontroller venligst, at alle varer er til stede i din pakke:

• Fenix LD45R Flashlight (with battery pre-installed)
• USB-C ladekabel
• Hylster
• Snor
• LumenTac Organizer

Billede 2.1: The included LumenTac Battery Organizer, useful for storing spare batteries or small accessories.

3. Specifikationer

The following table outlines the key technical specifications of the Fenix LD45R flashlight:

Note: Performance data is based on Fenix laboratory testing using a Fenix ARB-L21-5000 V2 battery under controlled conditions. Actual performance may vary depending on environmental factors and battery usage.

Billede 3.1: The Fenix LD45R flashlight in an outdoor environment, highlighting its advanced features.

4. Opsætning

4.1 Batteriinstallation

The Fenix LD45R comes with a Lithium Ion battery pre-installed. Before first use, ensure the tail cap is securely tightened to establish electrical contact. If replacing the battery, unscrew the tail cap, insert the new battery with the positive (+) terminal facing the head of the flashlight, and then re-tighten the tail cap.

4.2 Indledende opladning

It is recommended to fully charge the flashlight before its first use to ensure optimal performance and battery life. Refer to Section 6 for detailed charging instructions.

5. Betjening

5.1 Tænd/sluk

• At tænde: Long press the main switch for 0.5 seconds.
• At slukke: Long press the main switch for 0.5 seconds.

5.2 Mode Selection (General Mode)

With the flashlight turned on, single-click the main switch to cycle through the general output modes in the following order: Eco → Low → Medium → High → Turbo.

The flashlight features intelligent memory for Eco, Low, and Medium modes. If the flashlight is turned off in High or Turbo mode, it will resume at Medium mode when turned on again to prevent accidental high output and heat generation.

5.3 Focus Adjustment (Spotlight/Floodlight)

Rotate the toggle switch located on the side of the flashlight to smoothly adjust the beam focus between a concentrated spotlight for long-range illumination and a wide floodlight for broad area coverage. This adjustment is stepless, allowing for precise control over the beam pattern.

Billede 5.1: Operational diagram illustrating the electronic switch for power and output selection, and the toggle switch for beam focus adjustment.

Billede 5.2: Visual representation of the stepless regulation feature, showing the transition from a focused spotlight to a wide floodlight beam.

5.4 Specialtilstande (Strobe & SOS)

• Strobe: With the flashlight turned on, long press the main switch for 1.2 seconds to activate Strobe mode.
• SOS: While in Strobe mode, single-click the main switch to switch to SOS mode.
• Exit Special Modes: Single-click the main switch to return to the previously used general output mode.

5.5 OLED-skærm

The integrated OLED display provides real-time information about the flashlight's status:

• Current Lumen Value: Shows the output level in lumens.
• Current Selected Output: Indicates the active brightness level (e.g., Lv.5 for Turbo).
• Resterende batteriniveau: Displays a graphical representation of the battery charge.

Billede 5.3: Close-up of the OLED smart display, providing essential operational data at a glance.

6. Opladning

The Fenix LD45R features a convenient USB-C charging port for quick and efficient recharging.

• Charging Port Location: The USB-C charging port is located on the neck of the flashlight.
• Opladningsproces: Connect the supplied USB-C charging cable to the flashlight's port and to a USB power source (e.g., wall adapter, power bank, computer).
• Opladningsindikator: The OLED display will show charging progress and battery level.
• Opladningstid: A full charge typically takes approximately 3 hours with a compatible fast charger.
• Betjening under opladning: The flashlight can be used in Eco and Low brightness modes while charging. Higher output modes may cause battery drain or prevent charging.

Billede 6.1: The USB-C charging port on the flashlight's neck, demonstrating the charging connection.

7. Vedligeholdelse

• Rensning: Clean the flashlight body with a soft cloth. For optical surfaces, use a lens cleaning cloth.
• Smøring: Smør O-ringene med silikonefedt med jævne mellemrum for at opretholde vandtætheden.
• Batteripleje: Store the flashlight with a partially charged battery if not used for extended periods. Recharge every few months to prevent battery degradation.
• Kontaktpunkter: Keep the electrical contact points clean to ensure reliable operation.

8. Fejlfinding

If your Fenix LD45R flashlight is not functioning correctly, please refer to the following common issues and solutions:

• Lommelygten tænder ikke:
  • Sørg for, at halekappen er strammet helt.
  • Check if the battery is inserted correctly with the positive (+) terminal facing the head.
  • Charge the battery; it may be depleted.
  • Clean the battery contact points and the flashlight's contact surfaces.
• Output decreases or flashlight gets hot quickly:
  • High output modes (High, Turbo) generate significant heat. The flashlight has a built-in intelligent overheat protection system that will automatically reduce output to prevent damage. This is normal operation.
  • Ensure adequate airflow around the flashlight during prolonged high-output use.
• Battery drains rapidly:
  • Using the flashlight continuously on High or Turbo modes will consume battery power quickly.
  • Sørg for, at batteriet er fuldt opladet før brug.
  • Verify the battery is a genuine Fenix battery or a high-quality equivalent.
• Beam adjustment is not smooth:
  • Check for any debris or obstructions around the toggle switch.
  • Ensure the flashlight is clean and free from dirt.

9. Garanti og support

The Fenix LD45R flashlight is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fenix website. For technical support, service, or replacement parts, please contact your authorized Fenix dealer or the Fenix customer service department.

Du kan finde mere information og kontaktoplysninger på Fenix Store on Amazon.