Indledning
This manual provides comprehensive instructions for the installation, operation, and maintenance of your DENALI DM LED Light Pods with TriOptic™ Lens Kit. The DM LED Light Pods are designed to enhance visibility and illumination for various applications. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Billede 1.1: Two DENALI DM LED Light Pods, featuring a compact black housing and amber lenses, mounted on adjustable brackets. These lights are designed for enhanced visibility.
Opsætning og installation
Proper installation is crucial for the performance and longevity of your DENALI DM LED Light Pods. It is recommended that installation be performed by a qualified technician if you are unfamiliar with vehicle electrical systems.
1. Pakkens indhold
- DM LED Light Pods (2 units)
- TriOptic™ Lens Kit (includes clear spot lenses pre-installed, and flood lenses)
- Monteringshardware
- Wiring Harness (sold separately or included in specific kits)
2. Mounting the Light Pods
- Identify a suitable mounting location on your vehicle that provides clear light projection and does not obstruct other vehicle functions.
- Secure the mounting brackets to the desired location using the provided hardware. Ensure the brackets are firmly attached.
- Attach the DM LED Light Pods to the mounting brackets. Adjust the angle to achieve the desired beam direction.
- Tighten all fasteners to prevent movement during vehicle operation.
3. Elektrisk tilslutning
Connect the light pods to your vehicle's electrical system using a suitable wiring harness (not always included).
- Connect the positive wire from the light pods to a switched 12V power source, preferably through a relay and fuse.
- Connect the negative wire from the light pods to a reliable ground point on the vehicle chassis.
- Sørg for, at alle forbindelser er sikre og isolerede for at forhindre kortslutninger.
Betjeningsvejledning
The DENALI DM LED Light Pods are designed for versatile illumination.
1. Tænd/sluk
Once properly wired, the lights will activate via the connected switch or vehicle's high beam circuit, depending on your installation configuration.
2. TriOptic™ Lens System
The TriOptic™ Lens System allows for customization of the beam pattern. Each light pod comes with a clear spot lens pre-installed. An optional flood lens is included to provide different beam options.
- Spot Beam: Achieved with the pre-installed clear spot lenses. Provides a concentrated beam reaching approximately 395 feet (per pair).
- Oversvømmelsesstråle: Achieved by replacing the spot lenses with the included flood lenses. Provides a wider beam, approximately 150 feet wide. These flood lenses are E-Mark certified.
- Hybrid stråle: Achieved by using one spot lens and one flood lens per pair, offering a balance of distance and width.
3. Changing Lenses
- Ensure the light pods are off and cool to the touch.
- Carefully remove the front bezel of the light pod.
- Gently remove the installed lens.
- Insert the desired lens (spot or flood) into the housing, ensuring it is seated correctly.
- Reattach the front bezel securely.
Note: Additional amber or selective yellow lenses can be purchased separately for specific weather conditions or increased visibility.
Opretholdelse
Regular maintenance ensures optimal performance and extends the lifespan of your DENALI DM LED Light Pods.
- Rensning: Clean the lenses and housing periodically with a soft cloth and mild soap solution. Avoid abrasive cleaners that could scratch the lens or damage the finish.
- Inspektion: Regularly check all mounting hardware and electrical connections for tightness and corrosion. Tighten any loose fasteners.
- Linsetilstand: Inspect lenses for cracks or damage. Replace damaged lenses promptly to maintain light output and weather sealing.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke | No power, faulty wiring, blown fuse, faulty switch | Check power connections, inspect wiring for damage, replace fuse, test switch functionality. |
| Lysene flimrer | Loose connection, insufficient power supply | Tighten all electrical connections, ensure adequate power supply from the vehicle. |
| Reduceret lysudbytte | Dirty lens, internal component issue | Clean the lens. If the problem persists, contact DENALI support. |
If troubleshooting steps do not resolve the issue, please contact DENALI customer support for further assistance.
Specifikationer
- Produktnavn: DENALI DM LED Light Pods + TriOptic™ Lens Kit
- Model: DM LED Light Pods
- Lyskilde: LED
- Lumen output: 2190 lumens (per pair)
- Strålemuligheder: Spot, Flood, Hybrid (via TriOptic™ Lens System)
- Spot Beam Distance: Approximately 395 feet (per pair)
- Flood Beam Width: Approximately 150 feet wide (E-Mark certified)
- Linse farve: Amber (standard kit)
- Husmateriale: Holdbar aluminiumslegering
- Input bindtage: 12V DC (typical vehicle electrical system)
- Fabrikant: DENALI Electronics
Garanti og support
For warranty information and customer support, please refer to the official DENALI Electronics webwebstedet eller kontakt deres kundeserviceafdeling direkte. Gem din købsbevis til garantikrav.
Visit the DENALI Store on Amazon for mere information og produkttilbehør.
