1. Produktet er slutview
The VIAIR 450P-A EF is an automatic 12-volt portable air compressor designed for inflating tires on trucks, SUVs, and off-road vehicles. This unit is lightweight and features an automatic shut-off system for convenience and safety.
Key enhancements include a new head design that improves heat dissipation and reduces noise. It offers 20% higher performance and a 10% faster fill rate compared to previous models. Its compact size (12.4 inches) and weight (13 pounds) make it easy to store and transport.
Image 1.1: The VIAIR 450P-A EF Portable Air Compressor, including the compressor unit, coiled air hose, inflation gun, and battery clamps.
Funktioner:
- Automatisk sluk: Automatically turns off when desired pressure is reached or when the trigger is released.
- Forbedret ydeevne: Delivers 20% higher performance and 10% faster fill rate.
- Holdbart design: Features an updated head design for improved heat dissipation and noise reduction.
- Alsidig kraft: Equipped with a pre-installed 2-pin SAE connector for various power adapters, including VIAIR’s Patented 7-way Trailer Plug.
- Stabil drift: Patented I-Beam sand tray minimizes vibration and ensures stability on uneven terrain.
- Høj kapacitet: Capable of inflating tires up to 40 inches, filling a 37-inch tire from 10 to 40 PSI in 6 minutes and 41 seconds or less.
2. Hvad er der i æsken
The VIAIR 450P-A EF Portable Air Compressor kit comes with all necessary components for immediate use, neatly packed in a dual-compartment carry bag.
Image 2.1: A visual representation of the items included in the VIAIR 450P-A EF package, showing the compressor, hose, inflation gun, and various tips.
Inkluderede komponenter:
- 450P EF bærbar kompressor
- 160 PSI Tire Inflation Gun
- 30-ft inside braided coil hose
- 3-piece inflation tips kit
- Presta adapter
- Dual-compartment carry bag
- 6 ft power cord with 12V battery clamps (SAE Alligator Clamps)
3. Opsætning
Before operating your VIAIR 450P-A EF compressor, ensure you are in a safe, well-ventilated area. The compressor connects directly to your vehicle's 12V battery for maximum power.
Tilslutning af kompressor:
- Position the Compressor: Place the compressor on a stable, flat surface near the tire to be inflated. The I-Beam sand tray provides stability.
- Tilslut til strøm: Tilslut den røde positive (+) batteripolamp to the positive terminal of your vehicle's 12V battery. Connect the black negative (-) battery clamp to the negative terminal of your vehicle's 12V battery. Ensure connections are secure.
- Start motor: For optimal performance and to prevent draining your vehicle's battery, start your vehicle's engine before operating the compressor.
- Fastgør luftslange: Connect the 30-ft coiled air hose to the compressor's air outlet.
- Attach Inflation Gun: Connect the 160 PSI tire inflation gun to the other end of the coiled air hose.
Image 3.1: The compressor's battery clamps connected to a vehicle's battery, ready for operation.
4. Betjeningsvejledning
Once the compressor is set up, you can begin inflating your tires. The 450P-A EF features an automatic shut-off for ease of use.
Tire Inflation Procedure:
- Connect to Tire Valve: Attach the inflation gun's chuck to the vehicle's tire valve stem. Ensure a secure connection to prevent air leaks.
- Turn On Compressor: Locate the power switch on the compressor unit and turn it to the 'ON' position.
- Begynd inflation: Press the trigger on the inflation gun to start the air flow. The compressor will begin to inflate the tire.
- Monitortryk: Continuously monitor the tire pressure using the gauge on the inflation gun.
- Automatisk sluk: The compressor will automatically shut off when the desired pressure is reached or when the trigger is released. This prevents over-inflation and reduces wear on the compressor.
- Afbryde: Once inflation is complete, release the trigger, turn off the compressor, and disconnect the inflation gun from the tire valve.
Image 4.1: The VIAIR 450P-A EF in operation, inflating a vehicle tire.
Inflation Performance:
The 450P-A EF is designed for efficient inflation of large off-road tires. For example, it can inflate a 37-inch tire from 10 PSI to 40 PSI in approximately 6 minutes and 41 seconds.
Image 4.2: A chart illustrating the approximate fill times for 35-inch and 37-inch tires from 10 to 40 PSI.
5. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your VIAIR 450P-A EF compressor.
Generelle vedligeholdelsestips:
- Rensning: After each use, wipe down the compressor and accessories with a clean, damp klud til at fjerne snavs og snavs. Undgå at bruge skrappe kemikalier.
- Opbevaring: Store the compressor in its carry bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose is neatly coiled to prevent kinks.
- Undersøg forbindelser: Periodically check all electrical connections and air hose fittings for wear, damage, or loose connections. Replace any worn parts immediately.
- Luftfilter: While specific instructions are not provided, many compressors have an air filter that may need occasional cleaning or replacement. Refer to the manufacturer's full manual for details if applicable.
- Undgå overophedning: Allow the compressor to cool down between prolonged uses to prevent overheating, especially during high-duty cycle operations.
6. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på med din luftkompressor.
Almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Kompressoren tænder ikke. | Loose power connection, vehicle battery low, power switch off, blown fuse. | Sørg for batteri clamps are securely connected. Check vehicle battery voltage. Verify power switch is ON. Inspect and replace fuse if necessary. |
| Slow inflation or low pressure. | Air leak in hose/fittings, clogged air filter, worn piston ring. | Check all connections for leaks. Clean or replace air filter. If issue persists, contact support. |
| Compressor overheats and shuts off. | Exceeded duty cycle, insufficient ventilation. | Allow compressor to cool down for at least 30 minutes. Ensure proper airflow around the unit during operation. |
| Overdreven støj eller vibrationer. | Loose components, unstable surface. | Check for loose screws or parts. Ensure compressor is placed on a stable, flat surface. |
Note: For issues not listed or if solutions do not resolve the problem, please contact VIAIR customer support.
7. Specifikationer
Detailed technical specifications for the VIAIR 450P-A EF Enhanced Flow Portable Air Compressor.
| Specifikation | Detalje |
|---|---|
| Mærke | VIAIR |
| Modelnavn | 45144 - Automatic 450P-A EF |
| Voltage | 12 volt |
| Strømkilde | 12V Battery (SAE Alligator Clamps) |
| Maksimalt driftstryk | 150 PSI |
| Luftmængde kapacitet | 2.19 CFM (Cubic Feet per Minute) |
| Duty Cycle | 100% Duty Cycle @ 100 PSI |
| Støjniveau | 69 dB |
| Varens vægt | 13 pund |
| Produktdimensioner | 10.87 cm L x 5.8 cm B x 7.48 cm H |
| Slange længde | 30 fod |
| Materiale | Aluminium |
| Farve | Stealth Black |
| UPC | 818114004735 |
8. Garanti og support
VIAIR stands behind the quality of its products. For any questions or assistance, please refer to the warranty information and contact support.
Garantioplysninger:
The VIAIR 450P-A EF Portable Air Compressor comes with a 1 års producentgaranti.
Kundesupport:
For further support, technical assistance, or warranty claims, please visit the official VIAIR store or contact their customer service directly.
Official VIAIR Store: VIAIR Corporation Amazon Store
