Neretva brødbakke med to padler brugermanual

Indledning

Thank you for choosing the Neretva Bread Machine Pan with Two Paddles. This manual provides essential information for the proper setup, operation, and maintenance of your new bread pan, ensuring optimal performance and longevity. This pan is specifically designed for use with the PE9806U bread maker model.

Produkt overview og komponenter

The Neretva Bread Machine Pan is a replacement or spare part for compatible bread makers, featuring a durable construction and two kneading paddles for efficient dough preparation.

Billede: The Neretva bread machine pan, made of silver-colored metal, with a golden non-stick interior rim visible at the top. A metal handle is attached to the top edge. Next to the pan, a golden-colored kneading paddle is shown, designed to attach to the pan's internal shaft.

• Brødform: The main container where ingredients are mixed and baked.
• Kneading Paddles (x2): These attach to the shafts inside the pan and are responsible for mixing and kneading the dough.

Opsætning

1. Udpakning: Carefully remove the bread pan and paddles from their packaging.
2. Indledende rengøring: Before first use, wash the bread pan and kneading paddles with warm, soapy water. Rinse thoroughly and dry completely. Refer to the "Maintenance" section for detailed cleaning instructions.
3. Kompatibilitetskontrol: Ensure this pan is compatible with your bread machine model, specifically the PE9806U.

Betjeningsvejledning

Follow these steps to properly use your bread machine pan:

1. Insert Paddles: Place the two kneading paddles onto the shafts at the bottom of the bread pan. Ensure they are securely seated.
2. Tilføj ingredienser: Add your bread ingredients to the pan according to your recipe, typically liquids first, then dry ingredients, and finally yeast.
3. Insert Pan into Bread Maker: Carefully place the bread pan into the bread machine's baking chamber. Push down firmly until it clicks into place. Ensure it is stable and does not wobble.
4. Vælg program: Close the bread machine lid and select the desired baking program on your bread maker.
5. Removal After Baking: Once the baking cycle is complete, use oven mitts to carefully remove the hot bread pan from the machine.
6. Fjern brød: Allow the bread to cool slightly in the pan before carefully inverting it onto a wire rack to fully cool. If the paddles remain in the bread, remove them carefully.

Note: Always refer to your specific bread machine's user manual for detailed instructions on program selection and general operation.

Vedligeholdelse og pleje

Proper care will extend the life of your bread pan and paddles.

• Rensning:
  • Håndvask: It is recommended to hand wash the pan and paddles with warm, soapy water using a soft sponge or cloth. Avoid abrasive cleaners or scouring pads that could damage the non-stick coating.
  • Tåler opvaskemaskine: The pan and paddles are dishwasher safe, but hand washing is preferred to preserve the non-stick coating over time. If using a dishwasher, place them on the top rack.
  • After washing, rinse thoroughly and dry completely to prevent water spots or mineral buildup.
• Removing Stuck Paddles: If paddles are difficult to remove from the bread or pan, soak the pan in warm water for a short period to loosen any baked-on dough.
• Opbevaring: Store the clean and dry bread pan and paddles in a cool, dry place, away from direct sunlight and extreme temperatures.

Fejlfinding

If you encounter issues with your bread pan, consider the following:

• Pan Does Not Fit:

  Ensure the pan is correctly aligned with the bread machine's base. Apply gentle, even pressure to seat it properly. Verify that your bread machine is the compatible PE9806U model.
• Paddles Not Turning:

  Check that the kneading paddles are securely attached to their shafts inside the pan. Ensure no dough or debris is obstructing their movement. If the issue persists, it may indicate a problem with the bread machine itself, not the pan.

• Bread Sticks to Pan:

  Ensure the non-stick coating is intact. Always allow the bread to cool slightly before attempting to remove it. A light coating of cooking spray or oil on the paddles before adding ingredients can sometimes help prevent sticking.

Specifikationer

Garanti og support

For any questions regarding your Neretva Bread Machine Pan, including warranty information or technical support, please contact the manufacturer directly. You can often find contact details on the product packaging or through the retailer where the product was purchased.

Visit the official Neretva store for more information: Neretva Store on Amazon