ACEZUK 6000A Car Jump Starter with 150PSI Air Compressor

Indledning

Thank you for choosing the ACEZUK M03-MX Car Jump Starter with Air Compressor. This versatile device combines a powerful 6000A jump starter, a 150PSI tire inflator, a 26800mAh portable power bank, and a 400-lumen LED light. Designed for convenience and safety, it is an essential tool for any vehicle owner. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your device.

Produkt overview

The ACEZUK M03-MX is an all-in-one solution for roadside emergencies and outdoor activities. Its key features include:

• 6000A Peak Jump Starter: Capable of starting 12V vehicles with all gasoline engines or diesel engines up to 10L.
• 150PSI Air Compressor: Built-in high-flow inflator (35L/min) with 4 different nozzles for various inflatables.
• 26800mAh powerbank: Equipped with 2 USB outputs and a Type-C input/output for charging mobile devices.
• 400-Lumen LED Light: Funktioner Lamp, Strobe, and SOS modes for illumination and emergencies.
• Large 3.4'' HD Display: Shows real-time operating status, battery level, and error indications.
• Forudindstillet funktion: Allows setting desired tire pressure for automatic shut-off.

Image: The ACEZUK M03-MX jump starter unit, smart clamps, USB charging cable, various inflation nozzles, and a protective carrying case.

Komponenter og kontroller

Image: Detailed diagram showing the LED light, LCD screen, air fill hole, Type-C input/output port, USB 1 and USB 2 output ports, and the straw hat lamp. Also illustrates the function of the Mode button, OK button, '+' button, '-' button, and Light button.

• 1. Mode Button (M): Switches between different modes or units (PSI, BAR, KPA, KG/CM²).
• 2. "-" Button: Decreases values or navigates options.
• 3. Power Button (OK): Bekræfter valg eller tænder/slukker enheden.
• 4. Lysknap: Cycles through LED light modes (Lamp, Strobe, SOS).
• 5. "+" Button: Increases values or navigates options.
• LCD skærm: Displays battery level, operating status, and pressure readings.
• EC5-port: For connecting the smart jump starter clamps.
• Type-C port: For charging the device and charging external devices.
• USB Output Ports (USB1, USB2): Til opladning af eksterne enheder.
• Air Fill Hole: For connecting the inflatable tube.

Sikkerhedsinstruktioner

For at sikre sikker betjening og forhindre skader på enheden eller personskade, bedes du overholde følgende sikkerhedsretningslinjer:

• Always read the entire manual before using the device.
• Hold enheden væk fra vand, fugt og ekstreme temperaturer.
• Du må ikke selv adskille, ændre eller forsøge at reparere enheden. Kontakt kvalificeret servicepersonale.
• Ensure proper ventilation during use, especially when using the air compressor.
• Opbevares utilgængeligt for børn.
• Do not short-circuit the smart clamps.
• Vigtig: Do not use the air pump function continuously for extended periods. If the tire compressor becomes very hot, allow it to cool down for a few minutes before continuing inflation. Excessive inflation can damage the tire. If over-inflated, gently press the tire valve to release excess air.
• The device incorporates 10 ultra-safe protections, including protection against overheating, overcharging, over-discharge, over-current, short-circuit, reverse polarity, and low temperature.

Image: Visual representation of the 10 ultra-safe protections: Overheat Protection, Overcharge Protection, Over-discharge Protection, Over-current Protection, Spark-proof Protection, Overvoltage Protection, Short-circuit Protection, Reverse Polarity Protection, Anti-interference Protection, and Low Temperature Protection.

Opsætning

Upon receiving your ACEZUK M03-MX, it is recommended to fully charge the jump starter before its first use, even if it shows a full charge. This activates the battery and ensures optimal performance.

• Connect the provided Type-C charging cable to the device's Type-C port.
• Connect the other end of the cable to a 5V/2A (or higher) USB wall adapter (not included).
• Displayet viser opladningsstatus. Oplad indtil batteriindikatoren viser fuld strøm.

Hvad er inkluderet

Image: Contents of the package including the ACEZUK jump starter unit, inflatable tube, smart jumper clamps, Type-C charging cable, storage bag, 4 inflation nozzles, and the user manual.

• ACEZUK Jump Starter Unit
• Smart Jumper Clamps
• Oppustelig slange
• Type-C opladerkabel
• Opbevaringspose
• 4 x opblæsningsdyser
• Brugermanual

Betjeningsvejledning

Hopstart af et køretøj

Ensure the jump starter has at least 25% battery charge before attempting to jump start a vehicle.

Image: Step-by-step visual guide for jump starting a car: 1. Insert the jump cable into the jump starter. 2. Connect the clamps to your car's battery (red to positive, black to negative). 3. Start your engine. 4. Remove the clamps immediately after starting the car.

1. Step 1: Insert Jump Cable. Insert the smart jumper clamp cable into the EC5 port on the jump starter. Ensure it is fully inserted.
2. Trin 2: Tilslut Clamps til batteriet. Tilslut den røde (+) clamp to the positive terminal of your car battery and the black (-) clamp to the negative terminal. The smart clamps will indicate a successful connection.
3. Step 3: Start Engine. Once connected, start your vehicle's engine.
4. Step 4: Remove Clamps. Immediately remove the smart clamps from the car battery once the engine starts. Then, disconnect the clamps fra jumpstarteren.

Note: Remove the clip immediately after starting the car to prevent damage.

Brug af luftkompressoren

The built-in 150PSI air compressor can inflate tires for cars, bicycles, motorcycles, and even sports equipment and pool toys.

Image: The ACEZUK jump starter connected to a car tire, demonstrating its 150PSI wireless tire inflator capability with precise pressure display. Suitable for cars, trucks, SUVs, motorcycles, and boats.

1. Step 1: Connect Tube. Screw the inflatable tube onto the air fill hole of the device.
2. Step 2: Attach Nozzle. Select the appropriate nozzle for your item and attach it to the other end of the inflatable tube.
3. Step 3: Set Pressure. Power on the device. Use the "M" button to cycle through pressure units (PSI, BAR, KPA, KG/CM²). Use the "+" and "-" buttons to set your desired target pressure.
4. Step 4: Start Inflation. Press the "OK" button to begin inflation. The device will automatically stop when the preset pressure is reached.
5. Trin 5: Afbryd forbindelsen. Once inflation is complete, disconnect the tube and nozzle.

Caution: Do not operate the air compressor continuously for more than 10 minutes. Allow it to cool down for at least 15 minutes between uses to prevent overheating.

Bruges som en bærbar powerbank

The 26800mAh battery capacity allows you to charge various electronic devices on the go.

Image: The ACEZUK jump starter acting as a 99WH power source, demonstrating its ability to charge various devices like game consoles, phones, iPads, drones, earphones, smartwatches, and cameras via its USB1, USB2, and Type-C ports.

• Connect your device's charging cable to one of the USB output ports (USB1 or USB2) or the Type-C port on the jump starter.
• Jumpstarteren vil automatisk begynde at oplade din enhed.

Brug af LED-lys

The integrated 400-lumen LED light provides illumination for various situations.

Image: The ACEZUK jump starter with its 400-lumen LED light active, illustrating its three modes: Lamp (steady light), Strobe (flashing light), and SOS (Morse code signal).

• Press the Light button to turn on the LED light.
• Press the Light button again to cycle through the modes: Lamp (steady light) → Strobe (flashing light) → SOS (Morse code signal) → Off.

Opretholdelse

Proper maintenance ensures the longevity and reliability of your ACEZUK jump starter.

• Genopladning: Recharge the device every 2 to 3 months, even if not in use, to keep the battery active and prolong its lifespan.
• Rensning: Tør enheden af ​​med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.

Image: Illustration showing the optimal working temperature range for the ACEZUK jump starter, from -4°F / -20°C to 140°F / 60°C.

Fejlfinding

If you encounter issues with your ACEZUK M03-MX, refer to the following common problems and solutions:

Specifikationer

Garanti og support

For warranty information and customer support, please refer to the documentation included with your purchase or contact ACEZUK customer service directly through the retailer where the product was purchased. Keep your proof of purchase for warranty claims.

For further assistance, please visit the official ACEZUK webwebsted eller kontakt deres supportteam.