Indledning
Thank you for choosing the EverBrite Rechargeable Underhood Work Light. This manual provides essential information for the safe and efficient use of your new work light. Please read it thoroughly before operation and retain it for future reference.
Image: The EverBrite Rechargeable Underhood Work Light, showing its flexible light strip and magnetic ends with adjustable straps.
Produktegenskaber
- Tre lystilstande: High, Medium, and Low settings to adapt to various lighting requirements.
- USB-C hurtig opladning: Equipped with two USB-C charging ports and LED indicators (red for charging, green for full charge).
- Magnetic Base Design: Integrated magnets allow secure attachment to metal surfaces for hands-free operation.
- Adjustable Elastic Strap: Durable nylon strap designed to fit vehicle hoods from 52 to 75 inches wide, providing a secure and flexible fit.
- Dual Hooks: Sturdy hooks on both ends offer additional stability and mounting options.
Hvad er der i æsken
- EverBrite Rechargeable Underhood Work Light (Model E111014AE)
- USB-C ladekabel
- Instruktionsmanual
Image: Diagram showing the light strip, switch button, magnetic base, charging port, charging indicator, adjustable strap, and hook components.
Opsætning og installation
- Prepare the Light: Unfold the work light. Ensure the elastic straps are properly attached to the magnetic ends.
- Position on Hood: Open the vehicle's hood. Place the magnetic ends of the light onto the metal frame of the hood. The magnets will securely hold the light in place.
- Fastgør med stropper: Extend the adjustable elastic straps over the hood. Hook the ends of the straps onto suitable points on the hood or vehicle frame to provide additional stability and prevent accidental dislodgement. Adjust the strap length to ensure a snug fit across the hood (compatible with hoods 52 to 75 inches wide).
- Juster lysets retning: The flexible light strip can be bent and angled to direct illumination precisely where needed within the engine bay.
Image: The EverBrite work light installed under a car hood, illuminating the engine bay. The adjustable straps are visible.
Billede: Nærbillede view of the hanging hooks on the EverBrite work light, designed for securing the fixture.
Image: The magnetic base of the EverBrite work light attached to a metal pegboard, demonstrating its hands-free capability.
Betjeningsvejledning
- Tænd/sluk: Short press the switch button located on either end of the light to turn it ON.
- Skift gennem tilstande: Once ON, short press the switch button repeatedly to cycle through the three lighting modes: High, Medium, Low, and then OFF.
- Mode Sequence: High Brightness → Medium Brightness → Low Brightness → OFF.
Image: The EverBrite work light displaying its three distinct lighting modes: Low (200LM, 14H), Medium (400LM, 6H), and High (900LM, 3.5H).
Video: En overview of the EverBrite Rechargeable Underhood Work Light, demonstrating its features and operation.
Opladningsinstruktioner
- Tilslut oplader: Locate the USB-C charging port on the side of the light. Open the protective cover and insert the provided USB-C cable.
- Monitor opladningsstatus: An LED indicator will illuminate red to show that the device is charging.
- Fuld opladningsindikation: The LED indicator will turn green when the battery is fully charged. A full charge typically takes approximately 2 hours.
- Afbryde: Once fully charged, disconnect the USB-C cable and close the protective cover to maintain water resistance.
Forsigtighed: Do not operate the light while it is charging.
Image: Close-up of the EverBrite work light showing the USB-C charging port and the red/green LED charging indicators.
Opretholdelse
- Rensning: Tør lyset af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Store the work light in a cool, dry place away from direct sunlight when not in use.
- Batteripleje: To prolong battery life, charge the device fully before long-term storage and recharge every 3-6 months.
Fejlfinding
- Lyset tænder ikke:
- Sørg for, at batteriet er opladet. Tilslut det til en strømkilde, og kontroller opladningsindikatoren.
- Tryk hårdt på tænd/sluk-knappen.
- Light Not Holding Charge:
- Kontroller, at opladningskablet og adapteren fungerer korrekt.
- Sørg for, at opladningsporten er ren og fri for snavs.
- Magneter sidder ikke fast:
- Ensure the surface is clean and metallic.
- Use the adjustable straps and hooks for additional support, especially on uneven or painted surfaces.
Specifikationer
| Parameter | Værdi |
|---|---|
| Strømkilde | Lithium Ion batteri |
| Batterikapacitet | 2200mAh |
| Max lysstyrke | 1000 LM |
| Max Running Time (Low Mode) | Op til 14 timer |
| Max Running Time (High Mode) | Op til 3.5 timer |
| Vægt | 10.9 ounce (310 g) |
| Dimensioner | 8.66 x 4.72 x 2.05 inches (1400*40*32MM) |
| Maksimal stråleafstand | 40M |
| Opladningsport | USB-C (2 porte) |
| Hood Compatibility | 52 til 75 tommer bred |
Sikkerhedsoplysninger
- Do not look directly into the light source when operating on high brightness to avoid eye strain.
- Opbevares utilgængeligt for børn.
- Produktet må ikke skilles ad eller modificeres.
- Avoid exposing the product to extreme temperatures or direct flame.
- Sørg for, at dækslet til opladningsporten er forsvarligt lukket, når den ikke oplades, for at opretholde vandtætheden.
Garanti og support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EverBrite webwebsted.
