Ymiko Electric Heating Thermostat BHT 005GB User Manual

1. Produktet er slutview

The Ymiko BHT 005GB Electric Heating Thermostat is designed for precise temperature control in electric heating and floor heating systems. It features a backlit LCD screen, smart scheduling capabilities, and a power-off protector to maintain settings during power interruptions.

Figur 1: Forside view of the Ymiko BHT 005GB Electric Heating Thermostat, displaying a set temperature of 30.0°C and current time.

Figur 2: Vinklet view of the thermostat, highlighting its sleek design and backlit display.

2. Opsætning og installation

Installation of the BHT 005GB thermostat requires adherence to local electrical codes and should ideally be performed by a qualified electrician. The thermostat is designed for installation in a European standard 60mm concealed box.

2.1 Ledningsinstruktioner

Ensure the main power supply is disconnected before beginning any wiring. Refer to the wiring diagram provided on the back of the thermostat unit for correct connections.

• Connect the Live (L) and Neutral (N) wires from the power supply to the corresponding terminals.
• Connect the heating load wires to the appropriate output terminals.
• If using an external sensor (NTC 10K), connect it to terminals 5 and 6.
• For Modbus communication, connect the White and Red wires to the designated Modbus terminals.

Figur 3: Bagside view of the thermostat, illustrating the wiring terminals for power, heating load, external sensor, and Modbus communication.

2.2 Montering

After wiring, secure the thermostat into the 60mm concealed box using the provided screws. Ensure the unit is flush with the wall surface.

Figure 4: The thermostat unit shown with the two screws required for secure mounting into a wall box.

3. Betjeningsvejledning

The BHT 005GB thermostat features capacitive touch buttons for intuitive control. The backlit LCD screen displays both the target and measured temperatures, supporting Celsius and Fahrenheit units.

3.1 Grundlæggende betjening

• Tænd/sluk: Tryk på tænd/sluk-knappen for at tænde eller slukke for termostaten.
• Temperaturjustering: Use the up and down arrow buttons to adjust the desired temperature. The thermostat offers precise control with an accuracy of ±1℃.
• Valg af tilstand: Cycle through different operating modes (e.g., manual, automatic, timer) using the mode button.

Figure 5: The thermostat's front panel showing various indicator lights, which provide visual feedback on its current operational status.

3.2 Smart Scheduling

The thermostat supports smart scheduling with one week (5+1+1) presetting options and 6 programmable periods each day. This allows for energy-efficient heating tailored to your daily routine.

• Access the scheduling menu through the settings.
• Set desired temperatures and times for each period on weekdays, Saturday, and Sunday.
• Confirm settings to activate the schedule.

3.3 Timertilstande

Utilize countdown and cycle timers for specific heating needs.

• Nedtællingstimer: Set a duration after which the heating will turn off or change temperature.
• Cyklus timer: Program repetitive heating cycles for consistent comfort.

3.4 Power-Off Protector

The integrated power-off protector safeguards all your settings, ensuring they are retained even during power outages, hvilket eliminerer behovet for omprogrammering.

4. Vedligeholdelse

The Ymiko BHT 005GB thermostat requires minimal maintenance to ensure optimal performance and longevity.

• Rensning: Tør forsigtigt skærmen af ​​ogasinmed en blød, tør klud. Undgå at bruge slibende rengøringsmidler, opløsningsmidler eller kemiske spray, da disse kan beskadige overfladen eller de indvendige komponenter.
• Miljøforhold: Ensure the thermostat is not exposed to direct sunlight, extreme temperatures, or high humidity, which can affect its accuracy and lifespan.
• Inspektion: Periodically check for any loose connections or visible damage. If any issues are observed, consult a qualified technician.

5. Fejlfinding

If you encounter issues with your Ymiko BHT 005GB thermostat, consider the following basic troubleshooting steps:

• Intet display/Ingen strøm: Check the main power supply to the thermostat. Ensure all wiring connections are secure as per the installation instructions.
• Forkert temperaturaflæsning: Verify that the thermostat is not installed near heat sources (e.g., direct sunlight, lamps) or drafts, which could affect sensor accuracy. If an external sensor is used, check its connection.
• Opvarmning aktiveres ikke: Confirm that the thermostat is in an active heating mode (e.g., not off or in a scheduled period with a low setpoint). Check the set temperature to ensure it is above the current room temperature.
• Indstillinger gemmes ikke: The power-off protector should retain settings. If settings are lost, ensure stable power supply and consult the manual for advanced reset procedures if necessary.

For persistent issues, please refer to the support section for contact information.

6. Specifikationer

Figure 6: Technical drawing illustrating the dimensions of the Ymiko BHT 005GB thermostat in millimeters and inches.

7. Garanti og support

7.1 Garantioplysninger

Specific warranty details for the Ymiko BHT 005GB thermostat are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, contact the seller or manufacturer directly.

Extended protection plans may be available from your retailer. For example, 3-Year and 4-Year protection plans are sometimes offered to cover potential issues beyond the standard manufacturer's warranty.

7.2 Kundesupport

If you require assistance with installation, operation, or troubleshooting that is not covered in this manual, please contact Ymiko customer support or the retailer from whom you purchased the product.

You can visit the official Ymiko store for more information and support resources: Ymiko Store on Amazon