HTVRONT Auto Heat Press 2 Brugermanual

1. Introduktion

This manual provides comprehensive instructions for the safe and efficient operation of your HTVRONT Auto Heat Press 2. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Sikkerhedsoplysninger

ADVARSEL: Manglende overholdelse af disse sikkerhedsinstruktioner kan resultere i brand, elektrisk stød eller andre personskader eller beskadigelser.

Brug altid varmepressen på en stabil, varmebestandig overflade.
Keep hands and fingers clear of the heating plate during operation to avoid burns.
Nedsænk ikke maskinen i vand eller andre væsker.
Sørg for, at netledningen ikke er beskadiget, og at den er korrekt tilsluttet en jordet stikkontakt.
Træk stikket ud af maskinen, når den ikke er i brug eller før rengøring.
Efterlad ikke maskinen uden opsyn under drift.
The machine features an automatic shut-off function after 15 minutes of inactivity to prevent overheating.
Opbevares utilgængeligt for børn.

3. Produktet er slutview

The HTVRONT Auto Heat Press 2 is designed for efficient and precise heat transfer applications. Familiarize yourself with its main components:

HTVRONT Auto Heat Press 2 main unit — Figure 3.1: Main unit of the HTVRONT Auto Heat Press 2. This image displays the overall design of the heat press, featuring the top heating plate, the lower ironing board, and the control panel with an adjustable screen.

HTVRONT Auto Heat Press 2 labeled components — Figure 3.2: Labeled components of the HTVRONT Auto Heat Press 2. This diagram highlights key parts including the LED screen, control buttons, heat plate, ironing board, and base, along with overall dimensions.

Varmeplade: The upper heating element that applies heat and pressure.
Ironing Board (Lower Platen): The surface where materials are placed for pressing. Features a fully pull-out drawer design.
Grundlag: Giver stabilitet til maskinen.
LED skærm: Displays temperature, time, and pressure settings.
Kontrolknapper: Used to adjust settings and initiate operations.

4. Opsætning

Follow these steps to set up your HTVRONT Auto Heat Press 2 for first use:

Pak maskinen ud: Carefully remove the heat press from its packaging. Retain all packaging materials for potential future transport or storage.
Placering: Place the machine on a flat, stable, and heat-resistant surface. Ensure there is adequate clearance around the machine for ventilation and safe operation.
Strømtilslutning: Connect the power cord to the machine and then plug it into a standard 110V (DC) grounded electrical outlet.
Første gang tændt: Press the power button to turn on the machine. The LED screen will illuminate.

Quick Start Guide for HTVRONT Auto Heat Press 2 — Figure 4.1: Quick start guide illustrating the four basic steps for operating the heat press: powering on, setting parameters, placing materials, and initiating the press.

5. Betjeningsvejledning

5.1. Tænd/sluk

Tryk på tænd/sluk-knappen for at tænde.
For at slukke skal du trykke på tænd/sluk-knappen og holde den nede, indtil skærmen slukker.

5.2. Setting Parameters (Temperature, Time, Pressure)

The HTVRONT Auto Heat Press 2 allows for precise control over temperature, time, and pressure to suit various materials and transfer types.

Temperaturområde: 100°C - 210°C
Tidsinterval: 1 - 999 sekunder
Trykområde: 50 - 170 LB (adjustable)

Heat press control panel with temperature, time, and pressure settings — Figure 5.1: Control panel displaying temperature, time, and pressure settings. The image also highlights preset and custom modes for efficient use.

Use the control buttons on the LED screen to adjust these settings. The machine heats up quickly, reaching 410°F within 5 minutes and 30 seconds.

Adjustable pressure feature of the heat press — Figure 5.2: Illustration of the adjustable pressure feature, showing pressure levels from 50LB to 170LB, suitable for various heat transfer materials like DTF, Sublimation Paper, and HTV.

5.3. Automatic Pressing Cycle

Once parameters are set and the material is in place, the automatic pressing function simplifies operation:

Place your substrate and transfer material on the ironing board.
Press the "R" button to initiate the automatic pressing cycle. The heat plate will descend and apply pressure.
The machine will buzz when the set time is complete and automatically release the heat plate.

Automatic ironing and releasing function of the heat press — Figure 5.3: Depiction of the automatic ironing and releasing mechanism, highlighting hands-free operation and enhanced user safety.

5.4. Using the Fully Pull-out Drawer

The ironing board features a fully pull-out drawer, allowing for safe and easy placement of materials without contact with the hot heat plate.

Pull the drawer completely out before placing or adjusting your items.
Push the drawer back in before starting the pressing cycle.

5.5. Adjusting Screen Angle

The LED screen can be adjusted to 7 levels within a 0-75° range for improved visibility and ergonomic comfort during operation.

Angle-adjustable screen and fully pull-out drawer features — Figure 5.4: Demonstrates the angle-adjustable screen (0-75°) and the fully pull-out drawer, designed for user comfort and convenience.

5.6. Material Compatibility and Higher Heating Height

The HTVRONT Auto Heat Press 2 is compatible with various heat transfer materials and features an increased heating height for thicker items.

Kompatible materialer: HTV (Heat Transfer Vinyl), Sublimation Paper, DTF (Direct to Film), Heat Transfer Paper, Puff Heat Transfer Vinyl, Glitter Heat Transfer Vinyl.
Increased Heating Height: Up to 4.5 cm (1.77 inches), allowing for pressing on thicker items such as hoodies, canvas bags, and pillows, in addition to t-shirts.

Increased heating height for various materials — Figure 5.5: Illustrates the increased heating height of 1.77 inches (4.5 cm), demonstrating its capability to press both thin items like t-shirts and thicker items like hoodies.

Examples of items that can be pressed with the HTVRONT Auto Heat Press 2 — Figur 5.6: Eksamples of various items suitable for heat pressing, including t-shirts, sublimation blanks, pillows, canvas bags, socks, and hoodies.

Types of heat transfer materials compatible with the HTVRONT Auto Heat Press 2 — Figure 5.7: Various heat transfer materials compatible with the machine, such as Puff Heat Transfer Vinyl, DTF, Heat Transfer Paper, Sublimation Paper, and Glitter Heat Transfer Vinyl.

6. Vedligeholdelse

Korrekt vedligeholdelse sikrer din varmepresses levetid og optimale ydeevne.

Rengøring af varmepladen: Allow the machine to cool completely. Use a soft, damp cloth to wipe the heat plate. For stubborn residue, a specialized heat press cleaner can be used, following the cleaner's instructions. Avoid abrasive materials.
Cleaning the Ironing Board: Wipe the ironing board with a damp klæde. Sørg for, at den er tør inden næste brug.
Generel rengøring: Tør maskinens yderside af med en blød, tør klud.
Opbevaring: Opbevar varmepressen et tørt og støvfrit miljø, når den ikke er i brug.

7. Fejlfinding

If you encounter issues with your HTVRONT Auto Heat Press 2, refer to the following common troubleshooting steps:

Problem	Mulig årsag	Løsning
Maskinen tænder ikke.	Netledningen er ikke korrekt tilsluttet; problem med stikkontakten.	Ensure the power cord is securely plugged into both the machine and a working grounded outlet. Test the outlet with another device.
Maskinen varmer ikke op.	Temperature not set; machine in standby mode.	Verify temperature settings on the LED screen. Allow sufficient time for preheating. If the machine has been idle for 15 minutes, it may have entered auto shut-off mode; power cycle the machine.
Uneven heat transfer results.	Incorrect pressure; uneven material placement; faulty transfer material.	Adjust pressure settings as needed (50-170 LB). Ensure material is laid flat and evenly. Test with new transfer material.
Automatic press not engaging/releasing.	"R" button not pressed; obstruction.	Ensure the "R" button is pressed firmly. Check for any obstructions preventing the heat plate from moving freely.

If the problem persists after attempting these solutions, please refer to the support section for further assistance.

8. Specifikationer

Feature	Detalje
Modelnummer	SG-RYJ-0521-US
Varmeplade størrelse	15 x 15 tommer (38.1 x 38.1 cm)
Temperaturområde	100°C - 210°C
Tidsområde	1 - 999 sekunder
Trykområde	50 - 170 LB
Increased Heating Height	Op til 4.5 cm (1.77 tommer)
Magt	1500W
Input bindtage	110 volt (DC)
Varens vægt	47.4 pund (21.54 kg)
Produktdimensioner	Cirka 20.9 cm L x 17.1 cm B x 13 cm H
Automatisk sluk	Efter 15 minutters inaktivitet
Justering af skærmvinkel	0-75 grader

9. Garanti og support

For warranty information, please refer to the documentation included with your purchase or visit the official HTVRONT website. For technical support, product inquiries, or assistance with troubleshooting beyond this manual, please contact HTVRONT customer service through their official channels. Details can typically be found on the manufacturer's webwebsted eller din købsplatform.

Note: The manufacturer is committed to providing support; however, specific contact methods may vary. Always check the latest information on the official HTVRONT webwebsted.

	HTFRONT HPM10-2 10"x10" varmepressemaskine - Brugervejledning og specifikationer Omfattende guide til HTFRONT HPM10-2 10"x10" varmepressemaskine, der dækker garanti, betjening, sikkerhedsinstruktioner og materialespecifikationer til varmeoverføringsprojekter.
	HTFRONT A300 Auto Hat Varmepresse Brugermanual Brugermanual til HTVRONT A300 Auto Hat-varmepressen, der indeholder instruktioner, specifikationer og fejlfinding til varmeoverføringsapplikationer.
	Brugermanual til HTFRONT A200 automatisk tørretumblervarmepresse Omfattende brugermanual til HTFRONT A200 Auto Tumbler Heat Press, der dækker enheden overview, knapdetaljer, funktioner, brugsanvisninger, specifikationer, vedligeholdelse og garantioplysninger.
	HTFRONT Manuel Hattevarmepresse: Brugervejledning og instruktioner Omfattende brugermanual til HTVRONT manuel hattevarmepresse, der dækker opsætning, betjening, funktioner, specifikationer, fejlfinding og sikkerhedsforanstaltninger for optimale varmeoverførselsresultater.
	HTVRONT Tumbler-varmepresse: Trin-for-trin-guide En trin-for-trin guide til brug af HTVRONT varmepresse til sublimering af glas, der dækker designtryk, forberedelse, maskinbetjening og efterbehandling.
	Brugermanual til HTVRONT-telefoncovervarmepresse: Opsætning, betjening og specifikationer Omfattende brugermanual til HTVRONT-varmepressen til telefoncovers (model HPX01). Indeholder detaljerede instruktioner til opsætning, betjening, fejlfinding og vedligeholdelse. Lær, hvordan du sublimerer telefoncovers, badges og andre genstande med denne varmepresse. Indeholder specifikationer og garantioplysninger.

HTVRONT SG-RYJ-0521-US

HTVRONT Auto Heat Press 2 User Manual