ACEZUK 5000A Bærbar Jumpstarter Brugermanual

Indledning

Thank you for choosing the ACEZUK 5000A Portable Jump Starter. This device is designed to provide a reliable and powerful solution for starting dead vehicle batteries, as well as serving as a portable power bank and emergency light source. Please read this manual thoroughly before use to ensure safe and optimal operation.

Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden og køretøjet:

• Ensure the jump starter is fully charged before use, especially for jump-starting.
• Forsøg ikke at sætte gang i et frosset batteri.
• Tilslut clamps correctly: Red to positive (+), Black to negative (-). Reverse polarity can cause damage.
• Tillad ikke den røde og sorte clamps to touch each other once connected to the jump starter.
• Fjern clamps from the vehicle battery immediately after the vehicle starts.
• Hold enheden væk fra børn.
• Store in a cool, dry place away from direct sunlight and high temperatures.
• This device features 8 smart protections including over temperature, over charge, over discharge, over current, over voltage, short circuit, reverse polarity, and anti-interference protection. However, always follow proper connection procedures.

Figure 1: Illustration of the 8 smart clamp protections for enhanced safety.

Hvad er inkluderet

Your ACEZUK 5000A Portable Jump Starter package includes:

• 1 x ACEZUK Portable Jump Starter
• 1 x Smart Jumper Cables with 12V Display Clip
• 1 x USB-C opladningskabel
• 1 x Brugermanual (dette dokument)
• 1 x Storage Box/Portable Carry Case

Figure 2: Contents of the ACEZUK Jump Starter package.

Produktegenskaber

• Kraftig starthjælp: Delivers 5000A peak current, capable of starting 12V vehicles with up to 10.0L gas or 8.0L diesel engines. Operates effectively in extreme temperatures (-4°F to 140°F).
• Synlig LED-skærm: A large, clear display shows battery percentage and operational status, eliminating guesswork.
• Bærbar Power Bank: Equipped with multiple USB output ports (USB-Out 1: 5V-3A, 9V-2A, 12V-1.5A; USB-Out 2: 5V-2.4A) and a USB-C input (5V-2A, 9V-2A, 12V-1.5A) for charging various electronic devices.
• Multi-mode LED Emergency Torch: Features a bright LED light with Flashlight, Strobe, SOS, and Warning light modes for various emergency situations.
• Advanced Protection Technology: Incorporates 8 smart protections: reverse polarity, reverse connection, over current, over voltage, overload, over-charge, over-discharge, and short circuit protection. The smart clamps are constructed with all-metal for durability.

Figure 3: 5000A Peak Current capability for different vehicle types.

Figure 4: Clear 2-inch LCD display for easy monitoring.

Figure 5: The jump starter functioning as a portable power bank.

Figure 6: The versatile 400 Lumen LED light modes.

Opsætning

Opladning af startstarter

Before first use, fully charge the jump starter. It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not used.

1. Connect the provided USB-C charging cable to the USB-C IN port on the jump starter.
2. Tilslut den anden ende af USB-C-kablet til en kompatibel USB-vægadapter (medfølger ikke).
3. LED-displayet viser opladningsstatus. Enheden er fuldt opladet, når displayet viser 100%.

Connecting the Smart Jumper Cables

The smart jumper cables connect to the dedicated EC5 output port on the jump starter. Ensure a firm connection.

Figure 7: Visual guide for jump start connection steps.

Betjeningsvejledning

Hopstart af et køretøj

1. Forbered jumpstarteren: Ensure the jump starter has sufficient charge (at least 50% recommended).
2. Connect Smart Jumper Cables: Insert the blue plug of the smart jumper cables into the EC5 output port on the jump starter. The display on the smart cable will light up.
3. Tilslut til køretøjets batteri:
   • Tilslut rød (+) clamp til den positive pol på køretøjets batteri.
   • Tilslut sort (-) clamp til bilens batteriets negative terminal.

   The smart cable display will show the battery voltage. If the connection is correct, the indicator light on the smart cable will turn solid green.
4. Start køretøj: Return to the vehicle and start the engine.
5. Fjern Clamps: Once the vehicle starts, immediately remove the smart jumper cables from the vehicle battery, then disconnect the blue plug from the jump starter.

Note: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

Bruges som en bærbar powerbank

The jump starter can charge various USB-powered devices.

1. Open the rubber cover on the side of the jump starter to reveal the USB output ports.
2. Connect your device's charging cable to one of the USB-OUT ports.
3. Jumpstarteren vil automatisk begynde at oplade din enhed.

Using the LED Emergency Torch

The built-in LED light has multiple modes for different situations.

1. Press and hold the power button for 3 seconds to turn on the LED light (Bright mode).
2. Press the power button once to cycle through the modes: Bright → Strobe → SOS → Warning Light (Red/Blue flashing).
3. Press and hold the power button again for 3 seconds to turn off the LED light.

Opretholdelse

• Genopladning: For optimal battery life, recharge the jump starter every 3-6 months, even if not in use.
• Rensning: Tør enheden af ​​med en tør, blød klud. Brug ikke skrappe kemikalier eller slibende materialer.
• Opbevaring: Store the jump starter in its provided storage case in a cool, dry place. Avoid extreme temperatures.

Fejlfinding

Specifikationer

Garanti og support

For warranty information or technical support, please contact ACEZUK directly.

Kontakt email: ACEZUK@outlook.com

Please have your model number (M02-US) and purchase details ready when contacting support.