Walrus Audio Mako-serien MKII ACS1 Amp Brugermanual til førerhussimulator

1. Introduktion

The Walrus Audio Mako Series MKII ACS1 is an advanced amplifier and speaker cabinet simulator designed to provide the sound and feel of world-class amplifiers. It integrates complimentary speaker cabinet Impulse Responses (IRs) from Tone Factor and York Audio, along with controllable room size simulation. This device offers extensive options for delivering guitar tone in various settings, including live performance, studio recording, and home practice. Its user-friendly controls, stereo input and output capabilities, onboard presets, and MIDI support make it a versatile tool for guitarists.

The ACS1 features six distinct amplifier models, each inspired by historically significant amplifiers, and twelve cabinet IRs meticulously designed by industry experts to ensure optimal tonal representation. Custom IRs for the Fullerton, London, and Dartford amp models were engineered by David Hislop and Kenyon Reed at Tone Factor, while Justin York of York Audio designed the IRs for the Red, Citrus, and Tread amp modeller.

2. Sikkerhedsoplysninger

• Use only the specified 9V DC power supply (center negative, 300mA minimum). Incorrect power supplies can damage the unit and void the warranty.
• Udsæt ikke enheden for vand, fugt eller ekstreme temperaturer.
• Undgå at tabe enheden eller udsætte den for kraftige stød.
• Do not attempt to open the enclosure or modify the internal components. Refer all servicing to qualified personnel.
• Sørg for tilstrækkelig ventilation omkring enheden under drift.

3. Produktet er slutview

3.1 Nøglefunktioner

• Six distinct amplifier modeller.
• Twelve custom-engineered Impulse Responses (IRs) from Tone Factor and York Audio.
• Three different types of reverb effects.
• Controllable room size simulation.
• Stereo input and output for versatile connectivity.
• Onboard presets for quick recall of settings.
• Full MIDI support for advanced control.
• Ability to load custom IRs and update firmware via walrusaudio.io.
• Integrated Noise Gate and Output EQ.

3.2 Betjening og forbindelser

The ACS1 features a straightforward control layout and versatile connectivity options. Refer to the images below for a visual guide to the pedal's components.

Figur 1: Forside View of the Walrus Audio Mako Series MKII ACS1. This image displays the pedal's top panel, including the six control knobs (VOL, GAIN, ROOM, BASS, MIDDLE, TREBLE), the central display screen, and the two footswitches (BYPASS and BOOST/PRESET). The Walrus Audio logo and "AMP + CAB SIMULATOR" text are also visible.

Figure 2: Input Side View. This image shows the right side of the pedal, featuring the Mono (L) and Stereo (R) input jacks. These are used to connect your instrument or other pedals to the ACS1.

Figure 3: Output and Power Side View. This image displays the left side of the pedal, showing the Mono (L) and Stereo (R) output jacks, along with the 9V DC power input jack. The power requirements (9VDC, 300mA) are also indicated.

Øverste panelkontroller:

• BIND: Styrer pedalens samlede udgangsvolumen.
• GEVINST: Adjusts the amount of overdrive and distortion for the selected amplifier model.
• VÆRELSE: Controls the size and character of the simulated room ambiance.
• BAS: Justerer lavfrekvensresponsen af amplivligere.
• I midten: Adjusts the mid-range frequency response of the amplivligere.
• DISKANT: Justerer højfrekvensresponsen for amplivligere.
• Skærm: Shows current settings for amp model, cabinet IR, EQ, room, and other parameters.

Fodkontakter:

• Bypass: Toggles the effect on and off.
• BOOST/PRESET: Engages the boost function or cycles through presets, depending on the mode.

Tilslutninger på sidepanelet:

• MONO (L) IN: Main input for your instrument or signal chain.
• STEREO (R) IN: Secondary input for stereo signal processing.
• MONO (L) OUT: Main output to an amplifier, mixer eller lydgrænseflade.
• STEREO (R) OUT: Secondary output for stereo signal processing.
• 9V DC strømindgang: Connects to a standard 9V DC (center negative) power supply.
• MIDI IND/UD: For external MIDI control and synchronization.

4. Opsætning

4.1 Powering the ACS1

Connect a 9V DC (center negative) power supply with a minimum of 300mA to the power input jack on the left side of the pedal. Ensure the power supply meets these specifications to prevent damage.

4.2 Tilslutning af dit instrument

• Mono-opsætning: Connect your guitar or the output of your pedalboard to the MONO (L) IN stikket. Tilslut MONO (L) OUT stik til din amplifier, mixer eller lydgrænseflade.
• Stereo opsætning: For stereo input, connect your stereo source to both the MONO (L) IN og STEREO (R) IN jacks. For stereo output, connect the MONO (L) OUT og STEREO (R) OUT jacks to two separate inputs on your mixer or audio interface.

The ACS1 is designed to be placed at the end of your pedal chain, before your amplifier or directly into a mixer/audio interface, to simulate the full amplifier and cabinet sound.

5. Betjeningsvejledning

5.1 Grundlæggende betjening

Once powered on, the ACS1 will display its current settings. Use the BYPASS footswitch to engage or disengage the effect. The BOOST/PRESET footswitch can be used to cycle through presets or engage a boost, depending on the configured mode.

5.2 Justering Amplifier and Cabinet Settings

The top row of knobs (VOL, GAIN, ROOM) and the bottom row of knobs (BASS, MIDDLE, TREBLE) directly control the parameters displayed on the screen. Turning these knobs will adjust the corresponding values.

Figure 4: EQ and Cabinet Selection. This close-up of the ACS1 display shows the Bass, Middle, and Treble EQ settings, along with the selected cabinet (CAB 1) and its type (LONDON). The L+R indicator suggests stereo operation.

Vælger Amp Models and Cabinet IRs:

The display screen allows you to navigate and select different amplifier models and cabinet IRs. Consult the full Walrus Audio manual available on their website for detailed instructions on menu navigation and parameter selection. The ACS1 comes pre-loaded with six amp models and twelve cabinet IRs.

5.3 Room Simulation

The ROOM knob adjusts the simulated acoustic space around the amplifier and cabinet. This adds depth and realism to your tone. The display will show the current room type and size.

Figure 5: Room Settings Display. This image shows the ACS1 display indicating the "ROOM" parameter, with "TYPE ROOM 2" and "SIZE" visible, allowing users to adjust the simulated room acoustics.

5.4 forudindstillinger

The ACS1 supports onboard presets, allowing you to save and recall your favorite settings. The BOOST/PRESET footswitch can be configured to cycle through these presets. Refer to the official Walrus Audio documentation for detailed instructions on saving, loading, and managing presets.

Figure 6: Preset Selection Interface. This display shows the "PRESET" menu, with options for selecting different preset slots (A, B, C) and their corresponding numbers (0, 2).

5.5 Advanced Features (Noise Gate, Output EQ, MIDI)

The ACS1 includes additional features accessible through its menu system:

• Støjport: Helps to reduce unwanted noise and hum, especially with high-gain settings. Parameters like Threshold and Release can be adjusted.
• Udgangs-EQ: Provides further tonal shaping options for the overall output.
• MIDI kontrol: The ACS1 supports MIDI for external control of parameters, preset changes, and synchronization with other MIDI-enabled devices.

Figure 7: Noise Gate Settings. This image shows the ACS1 display with the "GATE" menu active, allowing adjustment of "THRESH" (Threshold) and "REL" (Release) parameters for noise reduction.

Figure 8: Main Menu Options. This display shows the main menu, providing access to "PRESET", "ROOM", and "OUT EQ" settings, among others.

5.6 Custom IRs and Firmware Updates

The ACS1 allows users to load their own Impulse Responses (IRs) and update the pedal's firmware. This functionality is managed through the Walrus Audio webwebsted. Besøg walrusaudio.io for detailed instructions and software tools required for these operations.

6. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the exterior of the pedal. Do not use abrasive cleaners or solvents.
• Opbevaring: Opbevar pedalen et tørt, køligt sted, væk fra direkte sollys og ekstreme temperaturer.
• Kabelpleje: Ensure all cables are in good condition and properly connected. Avoid bending cables sharply or placing heavy objects on them.

7. Fejlfinding

7.1 Ingen lydudgang

• Tjek strøm: Ensure the pedal is receiving proper 9V DC power and the power supply is functioning.
• Kabelforbindelser: Verify all audio cables are securely connected to the correct input and output jacks.
• Bypass-status: Ensure the pedal is not in bypass mode. The BYPASS footswitch LED should indicate the effect is active.
• Lydstyrkeindstillinger: Check the VOL knob on the ACS1 and the volume settings on your amprøremaskine eller røremaskine.

7.2 Unwanted Noise or Hum

• Strømforsyning: Use a high-quality, isolated power supply. Daisy-chaining power supplies can introduce noise.
• Jordsløjfer: Try isolating power to different pedals or using a ground loop isolator if necessary.
• Støjport: Engage and adjust the built-in Noise Gate feature to reduce hiss or hum.
• Kabelkvalitet: Ensure you are using shielded instrument cables.

7.3 Pedal Not Responding to Controls

• Power Cycle: Disconnect and reconnect the power supply to reset the unit.
• Firmware: Ensure your firmware is up to date. Check walrusaudio.io for de nyeste versioner.

For further troubleshooting or issues not covered here, please refer to the official Walrus Audio support resources.

8. Specifikationer

9. Garanti og support

Walrus Audio products are designed and built to high standards. For information regarding warranty coverage, product registration, and technical support, please visit the official Walrus Audio webwebsted eller kontakt deres kundeserviceafdeling.

Officiel Webwebsted: walrusaudio.com

Firmware & IR Management: walrusaudio.io