toocki Magnetic Cable Clips

Toocki magnetiske kabelklemmer (6-pak, sort) brugsanvisning

Model: Magnetic Cable Clips

Mærke: toocki

Indledning

Thank you for choosing Toocki Magnetic Cable Clips. This instruction manual provides essential information for the proper setup, operation, and maintenance of your cable management solution. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Produktegenskaber

  • Organized Space: Designed to keep your desk, nightstand, or vehicle free from cable clutter.
  • Alsidig kompatibilitet: Features a 7.5mm slot diameter, suitable for various cables including Type-C, HDMI, USB, Lightning, mouse, keyboard, and headphone cords.
  • Stærk klæbemiddel: Equipped with a robust adhesive backing for secure attachment to smooth surfaces like wood, glass, metal, or marble.
  • Hurtig installation: Simple peel-and-stick application for efficient cable management.
  • Reusable and Adjustable: The adhesive can be washed and reapplied up to 10 times, allowing for repositioning without leaving residue.
  • Magnetisk lukning: Automatic magnetic closing mechanism prevents cables from falling.

Pakkens indhold

  • 6 x Toocki Magnetic Cable Clips (Black)
  • Additional adhesive pads (if applicable)

Opsætning og installation

Follow these steps for proper installation of your Toocki Magnetic Cable Clips:

  1. Forbered overfladen: Ensure the desired installation surface (wood, glass, metal, marble, etc.) is clean, dry, and free from dust or grease. Use a clean cloth to wipe the area.
  2. Peel the Film: Carefully peel off the protective film from the adhesive backing of the cable clip.
  3. Vedhæft klippet: Press the cable clip firmly onto the prepared surface for at least 15 seconds to ensure strong adhesion.
  4. Indsæt kabel: Open the magnetic clip, place your cable into the 7.5mm slot, and allow the magnetic mechanism to close automatically, securing the cable.
Instructions for use: Clean surface, peel film, press firmly, put cables inside.
Image: Step-by-step guide showing how to clean the surface, peel the adhesive film, press the clip, and insert a cable.
Reinforced Acrylic Adhesive Pad shown on wood, tile, and painted wall surfaces.
Image: Demonstrates the strong adhesive pad and its application on various surfaces like wooden tables, tiles, and painted walls.

Betjeningsvejledning

Using the Toocki Magnetic Cable Clips is straightforward:

  • To insert a cable, gently open the magnetic clip.
  • Place the cable within the 7.5mm diameter slot.
  • Release the clip, and the magnetic mechanism will automatically secure the cable in place.
  • To remove or adjust a cable, simply open the clip again.
Diagram showing the magnetic cable clip opening, a cable being placed inside, and the clip automatically closing.
Image: Illustrates the strong magnetic adsorption feature, showing the clip opening, a cable being inserted, and the automatic closing mechanism.
A white cable being smoothly adjusted through a Toocki magnetic cable clip.
Image: Demonstrates how cables can be smoothly adjusted through the clips, ensuring they won't slip out.

Opretholdelse

  • Rensning: To maintain optimal adhesive performance, if the adhesive pad becomes dirty or loses stickiness, gently wash it with water and let it air dry. Avoid using harsh chemicals or abrasive materials.
  • Genanvendelighed: The adhesive is designed to be restickable and reusable up to 10 times after cleaning, allowing for repositioning without leaving residue.
  • Opbevaring: Store unused clips in a clean, dry environment away from extreme temperatures.
Image showing a Toocki cable clip on a wooden surface with a checkmark indicating 'Leave no trace' and another image showing a clip leaving a mark with a cross, indicating 'leave a trace'.
Image: Highlights the "No sticky residue" feature, demonstrating that the clips can be removed without leaving marks on surfaces when removed properly.

Fejlfinding

SpørgsmålMulig årsagLøsning
Clip not sticking securelySurface is dirty, oily, or uneven; insufficient pressure during installation; adhesive is worn.Clean the surface thoroughly before application. Apply firm pressure for 15 seconds. If adhesive is dirty, wash and air dry it. If adhesive is worn out, use a new adhesive pad.
Cable slips out of the clipCable diameter is too small for the 7.5mm slot; clip not fully closed.Ensure your cable diameter is appropriate for the 7.5mm slot. Verify the magnetic clip is fully closed after inserting the cable.
Adhesive leaves residue upon removalSurface not suitable for adhesive; improper removal technique.While designed to be residue-free, some delicate surfaces may react differently. Remove slowly and carefully. Test on an inconspicuous area first.

Specifikationer

  • Produktdimensioner: 0.87 x 0.87 x 0.04 tommer
  • Varens vægt: 1.44 ounces (for the pack, likely)
  • Mærke: toocki
  • Farve: Sort
  • Materiale: Acrylonitril Butadien Styren (ABS)
  • Stil: Enhåndsbetjening
  • Installationstype: Selvklæbende
  • Cable Slot Diameter: 7.5mm (approximate, based on description)
Diagram showing the dimensions of the cable organizer: 20mm width, 20mm depth, 15mm height, and a 7.5mm cable slot.
Image: Detailed dimensions of the cable organizer, including the 7.5mm cable slot diameter.
Image illustrating various cable types (headphone, audio, mouse, USB) compatible with the 7.5mm slot of the Toocki cable clip.
Image: Shows the 7.5mm slot compatibility with common cable types like silicone, nylon braided, and HDMI cables.

Garanti og support

Toocki products are designed for quality and durability. For any questions, concerns, or support needs regarding your Magnetic Cable Clips, please contact Toocki customer service through the retailer's platform where the purchase was made. Please refer to your purchase receipt for specific warranty details and return policies.

The product typically includes a return policy of 30 days for refund/replacement, as per standard retail practices.

Relaterede dokumenter - Magnetic Cable Clips

Preview Brugermanual og FCC-overholdelse af toocki TQ-PB07A Power Bank
Officiel brugermanual og FCC-overholdelsesoplysninger til den bærbare toocki TQ-PB07A powerbank. Lær om enhedens betjening, sikkerhedsretningslinjer og overholdelse af lovgivningen.
Preview Brugermanual og FCC-overholdelse af Toocki TQ-PB07 Power Bank
Dette dokument indeholder brugermanualen og FCC-overholdelsesoplysninger for Toocki TQ-PB07 Power Bank. Lær om produktfunktioner, sikkerhedsadvarsler og overholdelse af lovgivningen.
Preview Toocki TQ-PB10 10000mAh magnetisk trådløs powerbank brugermanual
Brugermanual til Toocki TQ-PB10 10000mAh magnetisk trådløs powerbank. Lær om dens funktioner, specifikationer, betjeningsvejledning og sikkerhedsforanstaltninger, herunder 20W PD-kablet opladning og 15W trådløs opladning.
Preview Toocki TWS In-Ear-øretelefoner HE-058B brugermanual
Brugermanual til Toocki TWS In-Ear-øretelefoner, model HE-058B. Indeholder produktinformation, specifikationer, brugsanvisninger og sikkerhedsretningslinjer.
Preview toocki 140W GaN bordoplader: Brugermanual og specifikationer
Detaljeret brugermanual til toocki 140W GaN-bordoplader med 3 USB-C- og 2 USB-A-porte. Lær om produktspecifikationer, brug, sikkerhedstips og kundeservice.
Preview TOOCKI TQ-CC43 100W 3-ports USB-billader | PD & QC 3.0 hurtigopladning
Oplev TOOCKI TQ-CC43, en kraftfuld 100W 3-ports USB-biloplader med USB-C PD og QC 3.0 hurtigopladning. Understøtter DC 12-24V-indgang med flere udgangskonfigurationer til samtidig opladning af enheder.