AUTOOL C701

AUTOOL Level 2 EV Charger User Manual

Model: C701 | Brand: AUTOOL

1. Introduktion

This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your AUTOOL Level 2 EV Charger (Model C701). This electric vehicle charging station is designed for home use, offering fast and smart charging capabilities for a wide range of electric vehicles.

2. Produktfunktioner

3. Hvad er der i æsken

The AUTOOL Level 2 EV Charger package includes the following components:

Contents of the AUTOOL EV Charger box: charger unit, mounting bracket, screws, user manual, and IC cards.

Image: All components included in the AUTOOL C701 EV Charger package.

4. Specifikationer

FeatureDetalje
ModelnummerC701
Input bindtage110 Volt AC
UdgangsstrømJusterbar fra 10A til 32A
Nominel effekt3.5 kW
Kabellængde26 fod (8 m)
BeskyttelsesvurderingIP66 TYPE 4 (Waterproof)
Driftstemperatur-25℃ til 50℃ (-13°F til 122°F)
MonteringstypeVægmontering
ForbindelsesteknologiEthernet, Wi-Fi, Bluetooth
Connector TypeNEMA 14-50
Varens vægt15.67 pund
Pakkedimensioner16 x 11 x 10.5 tommer

5. Opsætning og installation

For optimal performance and safety, professional installation by a licensed electrician is highly recommended. Ensure all local electrical codes and regulations are followed.

Installationstrin:

  1. Forbered installationsområdet: Use a level to draw a straight line on the wall where the charger will be mounted. This line will help ensure the bracket is installed correctly.

    Step 1 of installation: Using a level to draw a straight line on the wall for mounting.

    Image: Preparing the wall by drawing a level line for bracket alignment.

  2. Monter beslaget: Align the mounting bracket with the drawn line and mark the positions for drilling holes. Drill four holes, each approximately 1.2 inches deep. Insert the plastic expansion pipes into the drilled holes, tapping them gently with a hammer until flush with the wall. Secure the bracket to the wall using the provided screws, ensuring they are tightened for a firm installation.

    Step 2 of installation: Attaching the mounting bracket to the wall using screws and expansion pipes.

    Image: Securing the mounting bracket to the wall.

  3. Place the Charger Unit: Carefully place the main charger unit onto the installed bracket. Tighten the screws located under the main unit to securely fasten it to the bracket.

  4. Elektrisk tilslutning: Connect the power cord from the EV charger to a leakage circuit breaker. Ensure the Live (L), Neutral (N), and Ground (PE) wires are connected correctly. It is recommended to install the charger on a circuit breaker rated at 40A or greater.

    Wiring schematic for the EV charger showing connections to a circuit breaker with Live, Neutral, and Ground wires.

    Image: Detailed wiring schematic for connecting the EV charger to a circuit breaker.

  5. Organize Cable and Charging Gun: Once installed, organize the charging cable neatly around the unit. Insert the charging gun into its designated holder on the charger.

Installationsvideoguide:

Video: A step-by-step guide demonstrating the installation process of the AUTOOL C701 EV Charger, including mounting and electrical connections.

6. Betjeningsvejledning

The AUTOOL C701 EV Charger offers multiple ways to initiate and manage your charging sessions.

Brug af berøringsskærmen:

The charger features a 4.3-inch touchscreen display for direct control and monitoring.

Close-up of the AUTOOL EV Charger's 4.3-inch touchscreen display showing charging status, duration, charged capacity, current, voltage, og temperatur.

Image: The charger's touchscreen display showing various charging parameters.

App Smart Control (Bluetooth & Wi-Fi):

For enhanced control and monitoring, download the AUTOOL app on your smartphone. The app connects via Bluetooth or Wi-Fi.

IC Card Unlocking (Optional):

If enabled, the IC card function provides an additional layer of security, preventing unauthorized use of the charger. Simply swipe the registered IC card over the designated area to unlock and initiate charging.

Opladningsproces:

  1. Ensure the EV charger is properly installed and powered on.
  2. Åbn din elbils ladeport.
  3. Take the charging gun from its holder and firmly insert it into your vehicle's charging port. Ensure a secure connection.
  4. If using an IC card, swipe it to unlock. If using the app, initiate charging from the app. Otherwise, use the touchscreen to start.
  5. The charger display and/or app will indicate that charging has begun.
  6. Once charging is complete, or you wish to stop, use the app, IC card, or touchscreen to end the session.
  7. Carefully remove the charging gun from your vehicle and return it to its holder on the charger. Close your vehicle's charging port.

Video: Demonstration of the AUTOOL C701 EV Charger in operation, including connecting to a vehicle, using the touchscreen, and app control features.

7. Vedligeholdelse

Regular maintenance ensures the longevity and safe operation of your AUTOOL EV Charger.

8. Fejlfinding

If you encounter issues with your AUTOOL EV Charger, refer to the following common troubleshooting steps:

ProblemMulig årsagLøsning
Opladeren tænder ikke.Ingen strømforsyning; afbryderen er udløst.Check the main power supply and ensure the circuit breaker is in the ON position. Consult an electrician if issues persist.
Opladningen starter ikke.Charging gun not fully inserted; IC card not recognized; scheduled charging active; vehicle not ready to charge.Ensure the charging gun is securely connected. Re-swipe the IC card. Check scheduled charging settings. Verify your vehicle is ready to accept charge.
Langsom opladningshastighed.Strømindstillingen er for lav; køretøjets begrænsning.Adjust the current setting on the charger's display or app to a higher amperage (e.g., 32A). Check your vehicle's charging specifications.
Problemer med app-forbindelse.Bluetooth/Wi-Fi off; poor signal; app not updated.Ensure Bluetooth/Wi-Fi is enabled on your phone and the charger. Move closer to the charger for better signal. Update the app to the latest version.
Fejlmeddelelse på displayet.Internal fault; external issue (e.g., overcurrent).Note the error code/message and refer to the full user manual (if available) or contact AUTOOL customer support for assistance.

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact AUTOOL customer support.

9. Garanti og support

The AUTOOL C701 EV Charger comes with a Tre års garanti. This warranty covers any quality problems or defects with the product.

If your C701 unit has any defect, AUTOOL will provide a new replacement or suitable solutions to ensure customer satisfaction without delay. Lifetime technical support is also provided.

For any needs or inquiries, you are warmly welcomed to contact AUTOOL customer support. They aim to respond within 12 hours.

Please refer to your purchase documentation for specific contact details or visit the official AUTOOL webwebsted for supportoplysninger.

Relaterede dokumenter - C701

Preview AUTOOL C701 EV-ladestation brugermanual
Omfattende brugermanual til AUTOOL C701 EV-ladestationen, der beskriver installation, betjening, sikkerhedsretningslinjer og tekniske specifikationer for opladning af elbiler.
Preview AUTOOL C350 Portable EV Charger User Manual | Safety, Specs, Troubleshooting
Comprehensive user manual for the AUTOOL C350 Portable EV Charger. Covers safety instructions, product overview, technical specifications, structure, indicator lights, functions, installation, troubleshooting, maintenance, warranty, and return/exchange policies. Includes EU Declaration of Conformity.
Preview AUTOOL BT10 EPB-udløserværktøj Brugermanual
Brugermanual til AUTOOL BT10 EPB-udløserværktøjet, der beskriver dets funktioner, specifikationer, betjening, sikkerhed, vedligeholdelse og garantioplysninger til professionel brug i biler.
Preview AUTOOL T22 Rullende Utility Cart Brugermanual - Installations-, vedligeholdelses- og garantivejledning
Omfattende brugermanual til AUTOOL T22 rullende vogn, der dækker produktstruktur, trin-for-trin installation, vedligeholdelsesretningslinjer, garantioplysninger og retur-/ombytningspolitikker.
Preview AUTOOL SDT202 Røglækagedetektor brugermanual
Brugermanual til AUTOOL SDT202 røglækagedetektor. Indeholder detaljerede instruktioner til betjening, vedligeholdelse og fejlfinding af dette bildiagnoseværktøj, der er designet til effektiv lækagedetektion i køretøjer.
Preview AUTOOL PT635 Brændstoftrykmålersæt Brugermanual
Denne brugermanual indeholder omfattende instruktioner og sikkerhedsretningslinjer for AUTOOL PT635 brændstoftrykmålersættet, med detaljerede oplysninger om produktspecifikationer, betjening, vedligeholdelse og garanti.