1. Introduktion
The HYNOTONE ARES Distortion Preamp Pedal is designed to deliver aggressive, high-gain tones, mimicking the characteristics of a tube amplifier. Featuring a 5-stage JFET circuit, a versatile 3-band EQ, and specialized tone-shaping switches, this pedal is optimized for heavy music genres, extended-range guitars, and drop tunings. This manual provides detailed instructions for the proper setup, operation, and maintenance of your ARES pedal.
2. Sikkerhedsinstruktioner
- Udsæt ikke enheden for regn, fugt eller ekstreme temperaturer.
- Use only a regulated 9V DC power supply with a center-negative polarity. Incorrect power supplies can damage the unit and void the warranty.
- Undgå at placere enheden i nærheden af varmekilder eller i direkte sollys.
- Forsøg ikke selv at åbne eller servicere enheden. Overlad al service til kvalificeret personale.
- Opbevares utilgængeligt for børn.
3. Pakkens indhold
Sørg venligst for, at alle varer er til stede i pakken:
- HYNOTONE ARES Distortion Preamp Pedal
- Brugervejledning (dette dokument)
- Garantikort (hvis relevant)
4. Produktet er slutview
The HYNOTONE ARES pedal features a robust metal enclosure and intuitive controls for shaping your tone.
Figur 4.1: Front view of the HYNOTONE ARES pedal with all controls labeled, including Bass, Mid, Treble, Volume, Gain knobs, and Bite, Tight, Boost switches.
4.1. Kontrol og funktioner
- BAS knap: Justerer lavfrekvensresponsen.
- MID-knap: Justerer mellemfrekvensresponsen.
- TREBLE knap: Justerer diskantresponsen.
- VOLUME knap: Controls the overall output level of the pedal.
- GAIN knap: Justerer mængden af forvrængning.
- BITE Switch: Engages a mid-range grit, emphasizing a rawer, more aggressive distortion texture. When disengaged, the tone becomes smoother.
- TIGHT Switch: Refines the low-end for a punchy, focused sound, making the tone more aggressive. Recommended for use with 7-string guitars and drop tunings.
- BOOST-kontakt: Tightens the low end and boosts mids, providing an aggressive and modern tone. Recommended for use with 7-string guitars and drop tunings.
- Fodkontakt: Aktiverer eller omgår effekten.
Figur 4.2: En intern view of the pedal's circuit board, highlighting the JFET components. The 5-stage JFET circuit is designed to emulate the sound and feel of a real tube preamp.
5. Opsætning
Follow these steps to connect your HYNOTONE ARES pedal:
- Strømtilslutning: Connect a 9V DC center-negative power supply (not included) to the DC input jack on the pedal.
- Indgangsforbindelse: Connect your guitar or the output of another pedal to the INPUT jack on the ARES pedal using a standard 1/4-inch instrument cable.
- Udgangsforbindelse: Connect the OUTPUT jack of the ARES pedal to your amplifier's input or the input of another pedal in your signal chain using a standard 1/4-inch instrument cable. For optimal results, especially when using the ARES as a preamp, connect it to your amplifier's effects return or a dedicated power amp.
Figur 5.1: The HYNOTONE ARES pedal connected in a typical setup, showing input and output cables, ready for use with an electric guitar.
6. Betjeningsvejledning
Once connected, you can begin shaping your tone using the pedal's controls.
6.1. Grundlæggende betjening
- Press the footswitch to engage (LED on) or bypass (LED off) the distortion effect.
- Start with all knobs at the 12 o'clock position for a neutral starting point.
- Juster GEVINST knob to achieve your desired level of distortion. Higher settings will produce more aggressive tones.
- Brug BIND knob to match the output level of the pedal to your bypassed signal or to boost your signal for solos.
6.2. Tone Shaping with EQ and Switches
The 3-band EQ and specialized switches provide extensive control over your sound:
Figur 6.1: The HYNOTONE ARES pedal highlighting the Bass, Mid, and Treble EQ controls, which function similarly to a tube amplifier's tone stack.
- BASS, MID, TREBLE Knobs: Adjust these controls to sculpt your frequency response. These act like a traditional tube amp's tone stack, allowing for significant tonal variations.
- BITE Switch: Engage this switch for a pronounced mid-range character, adding a raw, gritty texture suitable for cutting through a mix. Disengage for a smoother, less aggressive mid-response.
- TIGHT Switch: Activate this switch to tighten the low-end frequencies, resulting in a more focused and articulate sound. This is particularly effective for palm-muted riffs and maintaining clarity in low tunings.
- BOOST-kontakt: This switch simultaneously tightens the low end and boosts the mid-range, creating a modern, aggressive tone ideal for heavy riffs and solos, especially with extended-range guitars.
Figur 6.2: Nærbillede view of the HYNOTONE ARES pedal, detailing the BITE, TIGHT, and BOOST switches and their functions for advanced tone shaping.
7. Vedligeholdelse
To ensure the longevity and optimal performance of your ARES pedal:
- Rensning: Brug en blød, tør klud til at rengøre pedalens yderside. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Opbevar pedalen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer, når den ikke er i brug.
- Forbindelser: Periodically check all cable connections for wear and tear. Replace damaged cables to prevent signal loss or noise.
8. Fejlfinding
If you encounter issues with your ARES pedal, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd når pedalen er trådt i. | Incorrect power supply, faulty cables, pedal not connected correctly. | Verify power supply (9V DC, center-negative). Check all instrument cables. Ensure input/output connections are correct. |
| Svag eller forvrænget lyd (utilsigtet). | Low battery (if using battery power), incorrect gain/volume settings, faulty cables. | Ensure adequate power. Adjust GAIN and VOLUME knobs. Test with different cables. |
| Excessive noise or hum. | Ground loop, interference from other electronics, faulty power supply. | Use a high-quality, isolated power supply. Move pedal away from other electronic devices. Check for proper grounding in your setup. |
| Fodkontakten reagerer ikke. | Strømproblem, intern fejl. | Ensure pedal is powered on. If problem persists, contact customer support. |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport for yderligere assistance.
9. Specifikationer
Technical specifications for the HYNOTONE ARES Distortion Preamp Pedal:
Figur 9.1: A visual representation of the HYNOTONE ARES pedal's key technical specifications, including dimensions, weight, and electrical characteristics.
| Specifikation | Værdi |
|---|---|
| Modelnummer | ares01 |
| Dimensioner (L x B x H) | 2.6 x 2.4 x 4.9 tommer (65 x 60 x 125 mm) |
| Varens vægt | 11.2 ounce (315 g) |
| Indgangsimpedans | 1 MOhm |
| Udgangsimpedans | 1 kOhm |
| Strømindgang | Center-negative 9V nominal DC, 7-12V range |
| Aktuel lodtrækning | 10mA typical, 100mA max |
| Connector Type | 1/4 inch audio jack |
| Hardware-interface | 1/4-tommer lyd |
| Signalformat | Analog |
| Lydudgangseffekter | Distortion, Preamp |
| Kontroltype | Knob, Toggle Switches |
10. Garanti og support
10.1. Garantioplysninger
This product is covered by a limited warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official TOPPING webwebstedet for detaljerede garantioplysninger.
10.2. Kundesupport
For technical assistance, troubleshooting, or service inquiries, please contact TOPPING customer support through their official website or the retailer from whom you purchased the product. Please have your model number (ares01) and purchase date available when contacting support.
