EdenPURE GEN21 infrarød varmelegeme og køleventilator brugermanual

1. Introduktion

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your EdenPURE GEN21 Infrared Heater and Cooling Fan. Please read this manual thoroughly before using the appliance and retain it for future reference.

The EdenPURE GEN21 combines an advanced PTC infrared heating element with a bladeless fan, offering both heating and cooling functionalities for year-round comfort. Its design ensures even air distribution from floor to ceiling.

2. Vigtige sikkerhedsinstruktioner

ADVARSEL: For at mindske risikoen for brand, elektrisk stød eller personskade skal du overholde følgende:

• Læs alle instruktioner, før du bruger denne varmeovn/blæser.
• Dette apparat er varmt, når det er i brug. For at undgå forbrændinger, lad ikke bar hud berøre varme overflader.
• Always use the handle when moving this heater/fan.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater/fan and keep them away from the sides and rear.
• Extreme caution is necessary when any heater/fan is used by or near children or invalids and whenever the heater/fan is left operating and unattended.
• Always unplug the heater/fan when not in use.
• Do not operate any heater/fan with a damaged cord or plug or after the heater/fan malfunctions, has been dropped or damaged in any manner. Return heater/fan to authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Må ikke bruges udendørs.
• This heater/fan is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater/fan where it may fall into a bathtub or other water container.
• Før ikke ledningen under gulvtæpper. Dæk ikke ledningen med tæpper, løbere eller lignende belægninger. Anbring ledningen væk fra trafikområdet, og hvor den ikke vil blive snublet over.
• To disconnect the heater/fan, turn controls to off, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater/fan.
• For at forhindre en mulig brand, må du ikke blokere luftindtag eller udstødning på nogen måde. Må ikke bruges på bløde overflader, som f.eks. en seng, hvor åbninger kan blive blokeret.
• A heater/fan has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater/fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters/fans directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater/fan includes a tip-over safety switch and an overheat protection sensor for enhanced safety.

3. Produktet er slutview

The EdenPURE GEN21 is designed for efficient heating and cooling of indoor spaces up to 1,000 sq. ft. Its compact, wall-hugger design allows for discreet placement while ensuring optimal air circulation.

Figur 3.1: Forside view of the EdenPURE GEN21 unit, showcasing the control panel and air vents.

Figur 3.2: Side og forside view of the EdenPURE GEN21 with dimensions: 22.25 inches height, 13.5 inches width, and 7.5 inches depth.

Nøglefunktioner:

• All-Season Comfort: Provides both infrared heating and fan-only cooling modes.
• Effektiv opvarmning: Utilizes a copper PTC heating element for consistent warmth and energy efficiency.
• Kompakt design: "Wall-Hugger" design with a slim footprint for space-saving placement.
• Digital kontrol: Features a digital touchscreen control panel and includes a remote control for convenience.
• Sikkerhedsfunktioner: Equipped with built-in tip-over protection and an overheat sensor.
• Stille drift: Designed for low-noise performance, suitable for various room types.

4. Opsætning og placering

1. Udpakning: Carefully remove the EdenPURE GEN21 from its packaging. Retain packaging for storage or future transport.
2. Placering:
   • Placer enheden på en fast, plan overflade.
   • Ensure there is at least 3 feet (0.9 m) of clear space around the front, sides, and rear of the unit to prevent obstruction of air intake and exhaust.
   • Do not place the unit on soft surfaces like carpets or rugs that could block the floor-air intake.
   • Avoid placing the unit near curtains, drapes, or other combustible materials.
3. Strømtilslutning: Plug the power cord directly into a 120V AC, 60Hz grounded wall outlet. Do not use extension cords, power strips, or surge protectors.

5. Betjeningsvejledning

Kontrolpanel:

Figur 5.1: Detaljeret view of the digital control panel with Power, Up/Down temperature, Mode, and Timer buttons.

Fjernbetjening:

Figure 5.2: The remote control for the EdenPURE GEN21, featuring Power, Low (fan speed), Temp Up/Down, and Timer buttons.

Grundlæggende betjening:

1. Tænd/sluk: Tryk på MAGT button on the control panel or remote to turn the unit on or off. The digital display will illuminate.
2. Setting Temperature (Heating Mode):
   • When in heating mode, use the UP (▲) og NED (▼) arrows to adjust the desired temperature. The temperature range is typically 60°F to 90°F (15°C to 32°C).
   • The unit will automatically cycle on and off to maintain the set temperature.
3. Selecting Mode (Heating/Cooling Fan): Tryk på MODE button on the control panel to switch between heating and fan-only (cooling) modes. The display will indicate the active mode.
4. Timer funktion:
   • Tryk på TIMER button to set an auto-off timer. Each press increases the timer by one hour, up to 12 hours.
   • The display will show the remaining hours before the unit automatically turns off.
5. Fan Speed (Cooling Mode): In fan-only mode, the remote control may offer a "LOW" button to adjust fan speed. The control panel typically adjusts fan speed automatically or has a single fan setting.

6. Vedligeholdelse og rengøring

WARNING: Always unplug the unit from the power outlet and allow it to cool completely before performing any maintenance or cleaning.

Rengøring af ydersiden:

• Tør de udvendige overflader af med en blød, damp klæde.
• Brug ikke slibende rengøringsmidler, voks eller polermidler, da disse kan beskadige finishen.
• Ensure no water enters the interior of the unit.

Rengøring af luftfilteret:

Regular cleaning of the air filter is essential for optimal performance and air quality. The EdenPURE GEN21 features a removable air filter located at the bottom rear of the unit.

Figure 6.1: Image showing the removable air filter and its housing at the bottom rear of the unit.

1. Locate the air filter cover at the bottom rear of the unit.
2. Gently pull the filter cover outwards to remove it.
3. Fjern filteret fra dets hus.
4. Clean the filter using a vacuum cleaner to remove dust and debris. For deeper cleaning, rinse the filter under warm running water.
5. Allow the filter to air dry completely before reinserting it. Do not use heat to dry the filter.
6. Reinsert the dry filter into its housing and replace the cover.

It is recommended to clean the air filter every two weeks or more frequently depending on usage and air quality.

Opbevaring:

If storing the unit for an extended period, unplug it, clean it thoroughly, and store it in a cool, dry place, preferably in its original packaging.

7. Fejlfindingsvejledning

Hvis problemet fortsætter efter at have forsøgt disse løsninger, skal du kontakte kundesupport.

8. Specifikationer

9. Garanti og support

The EdenPURE GEN21 comes with a 1 års producentgaranti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For warranty claims, technical support, or service inquiries, please contact EdenPURE customer service. Please have your model number (A5752) and proof of purchase available when contacting support.

For more information on optional accessories, such as the air purification kit, please visit the official EdenPURE webwebsted.