YUHANUS 1200lb Electric Magnetic Lock Kit User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your YUHANUS 1200lb Electric Magnetic Lock Kit. This comprehensive access control system is designed to enhance security for various door types, offering multiple entry and exit methods.

2. Sikkerhedsoplysninger

• Elektrisk sikkerhed: This system operates on 12V DC. Ensure all power connections are made correctly and securely. Disconnect power before performing any installation or maintenance.
• Professionel installation: While designed for ease of installation, professional assistance is recommended for complex wiring or if you are unfamiliar with electrical systems.
• Waterproof Components: The keypad, exit button, and magnetic lock are waterproof for outdoor use. Ensure all connections are properly sealed to maintain water resistance.
• Sikker montering: Ensure all components, especially the magnetic lock, are securely mounted to prevent accidental detachment or tampering.

3. Pakkens indhold

Bekræft, at alle komponenterne nedenfor er inkluderet i din pakke:

Billede 3.1: Overview of the YUHANUS 1200lb Electric Magnetic Lock Kit components, including the magnetic lock, power supply, RFID keypad, exit button, doorbell, remote control receiver, and remote key fobs.

• 1 x 1200lb Electromagnetic Lock
• 1 x RFID Access Control Keypad
• 1 x Power Supply Unit (AC110V-240V input, DC12V output)
• 1 x Press to Exit Button
• 1 x Doorbell Chime Unit
• 1 x Remote Control Receiver
• 2 x Remote Key Fobs
• 5 x IC Cards (Smart Lock Tags)
• Mounting Hardware and Cables (as required)

4. Opsætning og installation

This section outlines the general installation process. Refer to the wiring diagram for specific connections.

4.1 System overview

Image 4.1: Diagram illustrating the placement of system components on the outside (keypad, smart lock tags) and inside (magnetic lock, power supply, doorbell, exit button, remote control) of a door.

4.2 Komponentinstallation

1. Magnetic Lock Installation:
   Mount the electromagnetic lock on the door frame and the armature plate on the door. Ensure proper alignment for secure locking. Refer to the dimensions for appropriate placement.
   

   Image 4.2: Detailed dimensions of the 1200lb electromagnetic lock and its armature plate, showing measurements in millimeters and inches.

   

   Billede 4.3: Eks.ample of a magnetic lock installed on a door frame with the armature plate on the door.
2. RFID Access Control Keypad:
   Install the keypad on the exterior side of the door at a convenient height. It is waterproof for outdoor use.
   

   Billede 4.4: Forside view of the RFID Access Control Keypad with illuminated numbers and a doorbell icon.

3. Press to Exit Button:
   Mount the exit button on the interior side of the door. This button allows for easy egress.
   

   Image 4.5: Dimensions of the 'Press to Exit' button, showing its height, width, and depth in millimeters and inches.

4. Doorbell Chime Unit:
   Install the doorbell chime unit indoors, in a location where it can be easily heard.
   

   Image 4.6: The doorbell chime unit with its four-wire connection: Red (+12V), Black (GND), Green (BELL), and Yellow (BELL).
5. Fjernbetjeningsmodtager:
   Place the remote control receiver indoors, ensuring it has a clear line of sight or minimal obstruction for optimal remote signal reception.
   

   Billede 4.7: Intern view of the remote control receiver module, showing the relay, antenna, and terminal blocks for connections (NC, COM, NO, V+, V-).

6. Strømforsyningsenhed:
   Mount the power supply unit in a secure, dry, and accessible indoor location. Ensure it is protected from moisture and direct sunlight. Do not open the power supply cover while connected to AC power.
   

   Image 4.8: The power supply unit, indicating input (AC110V-240V) and output (DC12V 4A) terminals, along with connections for N.O., GND, N.C., +12V, PUSH, CTRL+, CTRL-, TIMING, and LED.

4.3 Ledningsdiagram

Carefully follow the wiring diagram below to connect all components. Incorrect wiring can damage the system or pose a safety hazard.

Image 4.9: Detailed wiring diagram showing connections between the access control keypad, power supply, magnetic lock, exit switch button, doorbell, and remote control receiver.

Vigtige ledningsføringspunkter:

• Tilslut Adgangskontroltastatur til Strømforsyning (+12V, GND, PUSH) and the Doorbell Chime Unit (BELL).
• Tilslut Magnetisk lås til Strømforsyning (N.O., GND).
• Tilslut Exit Switch Button til Strømforsyning (PUSH, GND).
• Tilslut Fjernbetjeningsmodtager til Strømforsyning (V+, V-, NO, COM).
• Ensure AC 110V-220V input is correctly wired to the Strømforsyning.

5. Betjeningsvejledning

5.1 Accessing the Door

• Adgangskodeindtastning: Enter your programmed password on the RFID keypad, then press '#' to confirm. The lock will disengage for a set period.
• IC Card Entry: Present a programmed IC card (smart lock tag) to the RFID keypad. The lock will disengage.
• Fjernbetjening: Use the remote key fob to unlock the door from a distance. Press the unlock button on the remote.

5.2 Exiting the Door

• Press to Exit Button: Press the 'Press to Exit' button located on the interior side of the door. The lock will disengage, allowing you to exit.

5.3 Dørklokkefunktion

• Visitors can press the doorbell icon on the RFID keypad. The indoor doorbell chime unit will sound, alerting occupants.

5.4 Programming (Keypad)

Refer to the specific keypad manual for detailed programming instructions for user passwords, IC cards, and system settings. Typically, this involves entering a master code, then specific commands for adding/deleting users or cards.

6. Vedligeholdelse

• Regelmæssig rengøring: Wipe down the keypad and other external components with a soft, damp klæde. Undgå slibende rengøringsmidler.
• Tilslutningstjek: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de er fastgjorte og fri for korrosion eller beskadigelse.
• Magnetic Lock Alignment: Ensure the magnetic lock and armature plate remain properly aligned for optimal performance. Adjust if necessary.
• Strømforsyning: Ensure the power supply unit is well-ventilated and free from obstructions.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact YUHANUS customer service. Keep your purchase receipt for warranty claims.