Keenso Car ISO Wiring Radio Harness Adapter User Manual

1. Introduktion

This manual provides essential information for the proper installation and use of your Keenso Car ISO Wiring Radio Harness Adapter. This adapter is designed to facilitate a seamless and lossless connection between your vehicle's wiring and compatible Pioneer car audio units. Please read this manual thoroughly before installation to ensure correct setup and optimal performance.

2. Produktet er slutview

2.1 Komponenter

The Keenso Car ISO Wiring Radio Harness Adapter consists of two primary connectors and a series of color-coded wires. One connector interfaces with the car's existing wiring, and the other connects to the Pioneer head unit. Individual wires are pre-terminated with appropriate connectors for power, ground, and speaker signals.

Billede 1: Overview of the Keenso Car ISO Wiring Radio Harness Adapter. This image displays the two primary connectors, one black and one reddish-brown, with multiple color-coded wires extending between them. Several smaller, clear insulated terminals are also visible along the wire lengths.

2.2 Kompatibilitet

This ISO wiring harness adapter is specifically designed as a replacement for Pioneer car audio units manufactured from 2015 onwards. Compatible models include, but are not limited to:

• Pioneer AVH-X1850DVD
• Pioneer AVH-X2800BT
• Pioneer AVH-270BT
• Pioneer AVH-280BT
• Pioneer MVH-AV270BT
• Pioneer MVH-AV280BT
• Pioneer AVH-X2700BT
• Pioneer AVH-X3700DAB
• Pioneer AVH-X5700DAB
• Pioneer AVH-285BT
• Pioneer AVH-X2850BT
• Pioneer AVH-X5850BT
• Pioneer AVH-X8850BT
• Pioneer AVH-X8750BT
• Pioneer AVH-X7750BT
• Pioneer AVH-X5700DA
• Pioneer AVH-X5750BT
• Pioneer AVH-X3700DAB
• Pioneer AVH-275BT
• Pioneer AVH-175DVD
• Pioneer AVH-X1750DVD
• Pioneer AVH-X2750BT
• Pioneer DEH-2550UI
• Pioneer AVIC-F70DAB
• Pioneer AVIC-F970DAB

This adapter is designed for Pioneer units utilizing a 16-pin plug configuration.

Image 2: The Keenso Car ISO Wiring Radio Harness Adapter shown with a list of compatible Pioneer car audio models. This image visually confirms the broad range of Pioneer head units that this harness supports, including various AVH, MVH, DEH, and AVIC series models.

3. Opsætning og installation

Installation of the Keenso Car ISO Wiring Radio Harness Adapter requires basic knowledge of car audio wiring. If you are unsure about any steps, it is recommended to seek professional assistance.

3.1 Sikkerhedsforanstaltninger

• Disconnect the vehicle's battery: Before beginning any electrical work, always disconnect the negative terminal of your car battery to prevent electrical shorts and damage.
• Identify correct wiring: Refer to your vehicle's and your Pioneer head unit's wiring diagrams to ensure correct connections.
• Insulate connections: Sørg for, at alle forbindelser er korrekt isolerede for at forhindre kortslutninger.

3.2 Installationstrin

1. Remove the existing head unit: Carefully remove your current car radio or the blanking plate from the dashboard to access the wiring harness.
2. Identify vehicle wiring: Locate the factory wiring harness in your vehicle.
3. Connect the Keenso adapter to the vehicle: Plug the appropriate connector of the Keenso ISO wiring harness adapter into your vehicle's factory wiring harness. Ensure a secure fit.
4. Connect the Keenso adapter to the Pioneer head unit: Plug the other connector of the Keenso ISO wiring harness adapter into the corresponding 16-pin port on your Pioneer car audio unit. This connection is designed to be lossless for optimal sound quality.
5. Bekræft forbindelser: Double-check all connections to ensure they are firm and correctly matched according to color codes and functions (e.g., power, ground, speaker outputs).
6. Test systemet: Before fully reassembling the dashboard, reconnect the vehicle's battery and perform a functional test of the Pioneer head unit. Check power, audio output from all speakers, and any other relevant functions.
7. Secure and reassemble: Once verified, carefully route the wiring to avoid pinching or damage, then secure the head unit and reassemble the dashboard components.

Billede 3: Et nærbillede view of one of the Keenso Car ISO Wiring Radio Harness Adapter's connectors, held by a hand, clearly showing the pin configuration. This image helps in understanding the physical connection points for installation.

4. Betjening

The Keenso Car ISO Wiring Radio Harness Adapter is a passive component designed to facilitate the electrical connection between your vehicle and the Pioneer head unit. Once correctly installed, its operation is integrated with the functionality of your car audio system. There are no specific operational controls on the harness itself.

Ensure that the connections remain secure to maintain consistent power and audio signal transmission to your Pioneer unit.

5. Vedligeholdelse

The Keenso Car ISO Wiring Radio Harness Adapter requires minimal maintenance. To ensure longevity and reliable performance:

• Undgå fysisk stress: Do not pull or excessively bend the wires, especially near the connectors, during or after installation.
• Opbevares tørt: Ensure the harness is installed in a dry environment, protected from moisture and extreme temperatures.
• Regular checks (if accessible): If the harness is accessible, periodically check for any signs of wear, corrosion, or loose connections.

6. Fejlfinding

If you encounter issues after installing the Keenso Car ISO Wiring Radio Harness Adapter, consider the following troubleshooting steps:

• Ingen strøm til hovedenheden:
  • Verify that the vehicle's battery is reconnected and fully charged.
  • Check the main power and ground connections of the harness to both the vehicle and the head unit.
  • Inspect vehicle fuses related to the car audio system.
• Ingen lyd fra højttalerne:
  • Ensure all speaker wires from the harness are correctly connected to the head unit and the vehicle's speaker wiring.
  • Check the head unit's audio settings (e.g., volume, mute, fader/balance).
  • Confirm that the speakers themselves are functional.
• Intermitterende strøm/lyd:
  • This often indicates a loose connection. Re-check all plugs and individual wire connections for tightness and proper seating.
  • Inspect wires for any signs of damage or fraying.
• Incorrect Functionality (e.g., accessory power not working):
  • Review the wiring diagram for your specific Pioneer head unit and vehicle to ensure that accessory, illumination, and other signal wires are correctly matched.

If issues persist after performing these checks, it is advisable to consult a professional car audio installer.

7. Specifikationer

8. Garanti og support

For specific warranty information regarding your Keenso Car ISO Wiring Radio Harness Adapter, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, please reach out to the manufacturer, Keenso, through their official channels.