BLUETTI Charger 1 (Model D60L) 560W Alternator Charger Instruction Manual

1. Introduktion

The BLUETTI Charger 1 is a 560W alternator charger designed to provide fast and efficient DC-DC charging for portable power stations and batteries. It offers a charging speed up to 6 times faster than standard car cigarette lighter chargers, utilizing excess alternator energy during vehicle operation. This device is compatible with all BLUETTI models and approximately 95% of third-party power stations, featuring adjustable voltage for broad utility. Its intelligent algorithm prevents vehicle battery draining, and an active cooling fan ensures stable performance even in high temperatures.

This manual provides detailed instructions for the safe and effective installation, operation, and maintenance of your BLUETTI Charger 1.

2. Sikkerhedsoplysninger

Please read and adhere to all safety warnings and instructions before operating the BLUETTI Charger 1. Failure to do so may result in injury or damage to the product.

2.1 Overvejelser før installation

• Ensure your vehicle is off and the battery is in good condition.
• Confirm your car battery is compatible with CHARGER 1. It should be a standard 12V or 24V battery, or two 12V batteries connected in series.
• Confirm that CHARGER 1's output voltage (15-56V) matches the DC input voltage range of your power station. Use a compatible adapter if needed.

2.2 Safe Installation and Use

• Wear personal protective equipment like gloves and safety glasses.
• Avoid high temperatures, sharp edges, or friction points while wiring.
• Tighten all screws securely to prevent wear or loose connections.
• Turn off your vehicle or use the app to disable CHARGER 1 before changing cables.
• Make sure the positive and negative terminals are correctly matched.
• Use BLUETTI DC input cable or a compatible one with a 60A breaker for safety. Connect the input cable to CHARGER 1 first, then to your car battery.
• Do not connect CHARGER 1's ports to an AC outlet.
• When using a power station, follow the user manual's guidelines for use and storage.
• Regularly inspect the product and its accessories for damage or deterioration. If the product's shell is cracked, do not use it and contact BLUETTI support or your local BLUETTI dealers.
• Hold børn, kæledyr, insekter og andre dyr uden for produktets rækkevidde.
• Dette produkt er kun designet til brug med IT/AV-produkter.

3. Pakkens indhold

The BLUETTI Charger 1 package includes the following items:

• BLUETTI Charger 1 (DC-DC charger)
• 6AWG DC Input Cable
• Installation accessories (Hex Socket Screws, Hex Socket Wrench, OT Terminals, Tube Terminals, Self-tapping Screws)
• MC4 Output Cable
• Brugermanual

4. Opsætning og installation

Follow these steps to install your BLUETTI Charger 1 in your vehicle. For a visual guide, please refer to the official BLUETTI installation video below.

4.1 Prepare Your Installation

1. Check all components in place, including a 6AWG DC input cable.
2. Prepare the necessary tools (screwdriver, wrench, utility knife, gloves, zip ties).
3. Ready your power station and solar charging cable.

4.2 Choose a Suitable Spot

Select a location inside the vehicle's cabin or trunk near the power station. Ensure the spot is dry, free from other substances, and not exposed to high temperatures. Mount the Charger 1 horizontally on a stable surface, leaving at least 20cm of clearance on all sides for proper ventilation.

4.3 Connect Cables to Charger 1

1. Switch off the circuit breaker on the 6AWG DC input cable.
2. Use the hex socket wrench to loosen the hex screws on the Charger 1 input ports.
3. Attach the red cable (BAT+) to the Input+ port and the black cable (BAT-) to the Input- port. Tighten the hex screws.
4. Loosen the hex screws on the Charger 1 output ports.
5. Connect the red cable (BAT+) of the MC4 Output Cable to the Output+ port and the black cable (BAT-) to the Output- port. Tighten the hex screws.

4.4 Connect Charger 1 to Power Station

1. Connect the MC4 connectors on the MC4 Output Cable and your power station's solar charging cable.
2. Plug the other end of the solar charging cable into your power station's DC input port.

4.5 Connect Charger 1 to Car Battery

1. Run the 6AWG DC input cable through your car to the car battery. Locate a suitable firewall entry point.
2. Attach the red OT terminal to the positive (+) car battery terminal and the black OT terminal to the negative (-) car battery terminal. Tighten securely.

5. Betjeningsvejledning

5.1 Power Up and Activate

1. Start din bils motor.
2. Flip the circuit breaker on the DC input cable to the 'On' position.
3. The Charger 1 will activate. The green indicator light will flash rapidly during startup and turn steady green once successful.

5.2 Configure with BLUETTI App

To optimize charging and monitor status, use the BLUETTI app:

1. Open the BLUETTI app on your smartphone and bind your Charger 1 device.
2. Ensure 'Charging' is disabled in the app before making adjustments.
3. Tap 'Charging Voltage' and select your power station model from the list. The app will automatically set the optimal charging voltage.
4. Once settings are confirmed, enable 'Charging' in the app to begin the process.
5. Monitor charging status via the app or the power station's display.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your BLUETTI Charger 1.

• Keep the unit clean and dry. Avoid exposure to water or excessive humidity.
• Periodically inspect all cables and connections for any signs of wear, damage, or loose fittings. Tighten connections as needed.
• Ensure the active cooling fan is free from obstructions to maintain stable performance and prevent overheating.
• Store the Charger 1 in a clean, well-ventilated area when not in use.

7. Fejlfinding

If you encounter issues with your BLUETTI Charger 1, refer to the following common problems and solutions:

8. Specifikationer

9. Garanti

The BLUETTI Charger 1 comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

10. Support

For further assistance, technical support, or warranty inquiries, please contact BLUETTI customer service or visit the official BLUETTI webwebsted.