RCF RCF-MR8N301

RCF MR8N301 8-tommer mellemtonehøjttaler brugsanvisning

Model: RCF-MR8N301

1. Introduktion

The RCF MR8N301 is an 8-inch high-efficiency, high-power midrange speaker engineered to deliver superior sound pressure levels within a compact design. Its construction features a powerful neodymium magnet assembly, significantly reducing the overall weight compared to similar ceramic midrange speakers. The unique sealed basket design eliminates the need for external back sealing chambers, simplifying cabinet integration and enhancing heat dissipation. This speaker is optimized for precise reproduction and control of midrange frequencies.

2. Produktfunktioner

  • Stemmespole: 3-inch, inside/outside copper voice coil for enhanced performance.
  • Strømhåndtering: 400W continuous program power handling.
  • Følsomhed: 107 dB sensitivity in horn-loaded applications.
  • Frekvensområde: 300 Hz – 3 kHz frekvensgang.
  • Magnet Design: High BL neodymium magnet design.
  • Basket Design: Unique aluminum sealed basket with vented fin heat dissipation.
  • Calibrated Back Volume: Ensures accurate time domain transient reproduction.

3. Tekniske specifikationer

Generelle specifikationer

ParameterVærdi
Nominel diameter8 tomme / 203 mm
Nominel impedans8 ohm
Program Power400 W
Krafthåndteringskapacitet200 W
Følsomhed102.0 dB
Frekvensområde300 - 3000 Hz
Effective Piston Diameter168 mm / 6.61 tommer
Max. Excursion Before Damage15 mm / 0.59 tommer
Minimum impedans9.8 ohm
Stemmespole diameter3.0 tomme / 76 mm
Voice Coil Winding MaterialAluminium
Voice Coil Length11 mm / 0.43 tommer
Antal lag2 (inside/outside)
Top Plate Thickness8 mm / 0.31 tommer
Cone DesignBuet
Surroundmaterialepolycotton
Surround DesignTriple roll
MagneterNeodym
Edderkop1

Thiele-Små parametre

ParameterVærdi
Resonansfrekvens (Fs)310 Hz
DC modstand (Re)6.60 ohm
Mechanical Factor (Qms)3.45
Electrical Factor (Qes)0.41
Total Factor (Qts)0.37
Bl Factor (Bl)17.80 T x m
Effective Moving Mass (Mms)10.0 g
Equivalent Cas Air Loaded (Vas)2.0 liter
Effektivt stempelområde (Sd)0.020 m²
Max. Linear Excursion (Xmax)4 mm
Voice Coil Inductance @ 1kHz (Le1k)1.16 mH
Half-space Efficiency (Eff)0.128

4. Setup and Mounting Information

Proper mounting is crucial for optimal performance and longevity of your RCF MR8N301 speaker. Refer to the dimensions below for accurate cabinet design and installation.

Fysiske dimensioner

ParameterVærdi
Samlet diameter238 mm / 9.37 tommer
Bolt cirkel diameter220 mm / 8.66 tommer
Bolt hul diameter7 mm / 0.28 tommer
Udskæring til frontmonteret baffel202 mm / 7.95 tommer
Rear Mount Baffle Cut-out187 mm / 7.36 tommer
Volume Occupied by Driver2 liters / 0.08 ft³
Højde111 mm / 4.37 tommer
Diameter208 mm / 8.19 tommer
Vægt3.31 kg / 7.3 lbs

Installationstrin:

  1. Prepare the Enclosure: Ensure your speaker enclosure is constructed to the specified dimensions, allowing for proper fit and acoustic performance.
  2. Skåret ud: Use the provided front or rear mount baffle cut-out dimensions to create the opening in your enclosure.
  3. Montering: Secure the speaker using appropriate screws through the bolt holes. Ensure a tight seal to prevent air leaks, which can negatively impact sound quality.
  4. Ledningsføring: Tilslut højttaleren til din amplifier or crossover network, observing correct polarity (+ to + and - to -). Incorrect polarity can lead to phase issues and degraded sound.
Top-down view of the RCF MR8N301 midrange speaker cone and surround.

Figur 1: Øverst view of the RCF MR8N301 speaker, showing the cone and mounting holes.

Vinklet view of the RCF MR8N301 midrange speaker with its sealed basket design.

Figur 2: Vinklet view of the RCF MR8N301, highlighting the compact design and sealed basket.

5. Betjeningsvejledning

Once installed and wired correctly, the RCF MR8N301 midrange speaker is ready for operation. Follow these general guidelines:

  • Magtmatchning: Sørg for din amplifier's power output is within the speaker's rated power handling capacity (200W RMS, 400W Program Power). Overpowering can cause damage.
  • Crossover-indstillinger: For optimal sound and speaker protection, use an appropriate crossover network. The recommended frequency range for this speaker is 300 Hz to 3 kHz. Set your high-pass filter above 300 Hz and your low-pass filter below 3 kHz.
  • Lydstyrkekontrol: Gradually increase the volume to avoid sudden peaks that could stress the speaker. Listen for any signs of distortion and reduce volume if detected.
  • Indbrudsperiode: New speakers may benefit from a break-in period of several hours of moderate-level playback to allow the suspension components to loosen and achieve optimal performance.

6. Pleje og vedligeholdelse

To ensure the longevity and continued performance of your RCF MR8N301 speaker, observe the following care and maintenance practices:

  • Rensning: Use a soft, dry cloth to gently wipe dust from the speaker cone and frame. Avoid using harsh chemicals or abrasive materials.
  • Miljøforhold: Protect the speaker from extreme temperatures, direct sunlight, and high humidity. While the speaker is robust, these conditions can degrade materials over time.
  • Fysisk beskyttelse: Avoid touching the speaker cone or surround with your hands or other objects, as this can cause damage.
  • Opbevaring: If storing the speaker for an extended period, keep it in a cool, dry place, ideally in its original packaging or a protective cover.

7. Fejlfinding

If you encounter issues with your RCF MR8N301 speaker, consider the following common troubleshooting steps:

  • Ingen lyd:
    • Kontroller alle ledningsforbindelser fra amplifier/crossover to the speaker for secure contact and correct polarity.
    • Bekræft, at ampkøleren er tændt og fungerer korrekt.
    • Sørg for, at lydkilden er aktiv og sender et signal.
  • Forvrænget lyd:
    • Reducer lydstyrken. Forvrængning opstår ofte, når amplifier or speaker is overdriven.
    • Check crossover settings to ensure they are appropriate for the midrange speaker's frequency range.
    • Inspect the speaker cone and surround for any visible damage.
  • Weak or Uneven Sound:
    • Confirm correct wiring polarity for all speakers in your system.
    • Ensure the speaker is properly mounted and sealed within its enclosure.

If these steps do not resolve the issue, consult a qualified audio technician.

8. Pakkens indhold

The RCF MR8N301 package includes:

  • 1 x RCF-MR8N301 8-inch Midrange Speaker (8-Ohm)

9. Garanti og support

RCF products are manufactured to high standards and undergo rigorous quality control. For specific warranty details and support inquiries, please refer to the warranty card included with your product or visit the official RCF webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Relaterede dokumenter - RCF-MR8N301

Preview RCF KX32-A Active 2-Way Speaker System
Detailed specifications and features of the RCF KX32-A, a 3200W Peak, 1600W RMS active 2-way speaker system with a 12-inch neodymium woofer and a 3-inch titanium compression driver. Includes information on its acoustic performance, input/output, processor, amplifier, and physical dimensions. Also lists compatible accessories.
Preview RCF KX45-A Active 2-Way Speaker System: Specifications and Accessories
Detailed specifications and optional accessories for the RCF KX45-A, a 3200W Peak, 1600W RMS active 2-way speaker with a 15-inch neodymium woofer and a 1.4-inch titanium compression driver, featuring RDNet compatibility.
Preview RCF M 18 digital mixer referenceguide
Omfattende referenceguide til RCF M 18 Digital Mixer, med detaljerede oplysninger om funktioner, opsætning, betjening, firmwareopdateringer, netværksforbindelse og tekniske specifikationer for musikere og lydprofessionelle.
Preview RCF COMPACT C-serien: COMPACT C 32 & C 45 brugermanual
Comprehensive owner's manual for RCF COMPACT C 32 and COMPACT C 45 two-way professional loudspeakers, covering safety precautions, product description, connection details, configuration options, mounting instructions, accessory information, low impedance connection notes, dimensions, and technical specifications.
Preview RCF HDL15-AS Aktiv Flyvbar Højtydende Subwoofer Brugermanual
Denne brugermanual indeholder detaljerede oplysninger om RCF HDL15-AS Active Flyable High Power Subwoofer. Den dækker sikkerhedsforanstaltninger, produktfunktioner, tekniske specifikationer, installation, rigning og array-design til professionel lyd og touring-applikationer.
Preview RCF ES 3080 Mixer-Amplivligere brugervejledning
Omfattende brugermanual til RCF ES 3080 mixer-ampLifier, med detaljerede oplysninger om dens funktioner, betjening, tilslutninger og specifikationer. Indeholder sikkerhedsforanstaltninger og tips til fejlfinding.