1. Vigtige sikkerhedsinstruktioner
Please read and understand all instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not expose the power bank to extreme temperatures, direct sunlight, or high humidity.
- Do not disassemble, open, or attempt to repair the power bank.
- Hold powerbanken væk fra vand og andre væsker.
- Tab ikke powerbanken, punkter den ikke og brug ikke for meget kraft på den.
- Brug kun certificerede opladningskabler og adaptere.
- Opbevares utilgængeligt for børn.
- Bortskaf powerbanken ansvarligt i henhold til lokale regler.
Figur 1.1: The power bank is designed with multiple safety features, including protection against short-circuits, overcharging, and safeguarding connected devices during charging.
2. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- amazon basics 10000mAh 20W Fast Charging Power Bank
- USB-C til USB-C opladerkabel
- MagTag Ring (for non-MagSafe compatible devices)
- Brugermanual
3. Produktet er slutview
Familiarize yourself with the components of your power bank:
Figur 3.1: The amazon basics 10000mAh Power Bank features a sleek design with an integrated kickstand for convenient viewunder opladning.
- Power knap: Press to check battery level or initiate wireless charging.
- LED-indikatorer: Vis den resterende batterikapacitet.
- USB-C-port (Input/Output): Used for charging the power bank and wired charging of devices.
- Trådløs opladningsplade: Magnetic surface for wireless charging compatible devices.
- Integrated Kickstand: Allows the power bank to stand upright, supporting a phone for hands-free viewing.
4. Kom godt i gang
4.1 Indledende opladning
Before first use, fully charge your power bank. Connect the provided USB-C cable to the power bank's USB-C port and the other end to a compatible USB wall charger (not included). The LED indicators will illuminate to show charging progress and turn solid when fully charged.
4.2 Attaching the MagTag Ring (for non-MagSafe devices)
If your device is not MagSafe compatible, use the included MagTag ring to enable magnetic attachment for wireless charging:
- Clean the back surface of your phone or phone case thoroughly.
- Peel off the adhesive backing from the MagTag ring.
- Carefully align and press the MagTag ring onto the center of your device's back or case. Ensure it is centered for optimal magnetic connection and wireless charging efficiency.
- Allow the adhesive to set for a few hours before heavy use.
5. Betjening
5.1 Opladning af powerbanken
Sådan genoplades powerbanken:
- Tilslut det medfølgende USB-C til USB-C-kabel til powerbankens USB-C-port.
- Connect the other end of the cable to a compatible USB-C wall charger (20W or higher recommended for fast charging).
- The LED indicators will show the charging status. All LEDs will be solid when fully charged.
Figur 5.1: The USB-C port is used for both charging the power bank and charging external devices.
5.2 Charging Devices (Wired)
To charge your device using a wired connection:
- Connect your device to the power bank's USB-C port using a compatible USB-C cable.
- Powerbanken begynder automatisk at oplade din enhed. Hvis ikke, skal du trykke én gang på tænd/sluk-knappen.
- The LED indicators will show the power bank's remaining battery level.
Figur 5.2: The power bank supports up to 20W wired fast charging via its Type-C port.
5.3 Charging Devices (Wireless)
Sådan oplader du din enhed trådløst:
- Ensure your device is wireless charging compatible (MagSafe or with MagTag ring).
- Align your device's wireless charging area with the magnetic charging pad on the power bank. The magnets will snap into place.
- Press the power button once to activate wireless charging.
- Your device should indicate that it is charging.
Figur 5.3: Magnetic alignment ensures efficient wireless charging.
Figur 5.4: The power bank is compatible with various devices, including iPhones and AirPods.
5.4 Pass-through-opladning
The power bank supports pass-through charging, allowing you to charge both the power bank and a connected device simultaneously.
- Connect the power bank to a wall charger using the USB-C cable.
- Connect your device (wired or wirelessly) to the power bank.
- The power bank will charge itself while also providing power to your connected device.
Figur 5.5: Pass-through charging allows simultaneous charging of the power bank and a connected device.
6. Pleje og vedligeholdelse
- Rengør powerbanken med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Opbevar powerbanken på et køligt, tørt sted, når den ikke er i brug.
- Avoid storing the power bank with a completely depleted battery for extended periods. Charge it at least once every three months to maintain battery health.
7. Fejlfinding
| Problem | Mulig løsning |
|---|---|
| Powerbank oplader ikke | Ensure the charging cable and wall adapter are working correctly. Check the USB-C connection. |
| Device not charging (wired) | Ensure the cable is securely connected to both the power bank and the device. Press the power button on the power bank. Check if the power bank has sufficient charge. |
| Device not charging (wireless) | Ensure your device is wireless charging compatible and properly aligned with the power bank's charging pad. Press the power button. Remove any thick cases that might interfere with wireless charging. If your phone is not MagSafe compatible, ensure the MagTag ring is correctly attached. |
| Powerbanken bliver varm under brug | Det er normalt, at powerbanken bliver en smule varm under opladning eller afladning. Hvis den bliver for varm, skal du stoppe med at bruge den og kontakte support. |
| LED-indikatorer virker ikke | Press the power button to check the battery level. If still unresponsive, the power bank may be fully discharged or require service. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | ABPB10K15W |
| Batterikapacitet | 10000 mAh |
| Kablet udgang | Up to 20W (USB-C Power Delivery) |
| Trådløs udgang | Op til 15W |
| Input (Charging Power Bank) | USB-C (20W recommended) |
| Særlige funktioner | Fast Charging, Wireless Charging, Magnetic Hold, Pass-Through Charging |
| Dimensioner | 11.1 x 8.9 x 2.9 cm |
| Vægt | 208 g |
| Batteritype | Lithium polymer |
| Oprindelsesland | Indien |
9. Garanti og support
This amazon basics product is typically covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official amazon basics webwebsted.
For technical support, troubleshooting assistance, or warranty claims, please contact amazon basics customer service through the Amazon website or your purchase platform. Have your product model number (ABPB10K15W) and purchase details ready.
Du kan også finde yderligere supportressourcer og ofte stillede spørgsmål på amazon basics Store.
