DOG CARE Hundetræningshalsbånd TC01 & Genopladelig Gøpakke Brugermanual

1. Introduktion

This manual provides detailed instructions for the DOG CARE Dog Training Collar TC01 and the accompanying Rechargeable Bark Collar. This bundle offers a comprehensive solution for managing and training your dog's behavior, promoting a harmonious environment for both you and your pet. Please read this manual thoroughly before use to ensure proper and safe operation.

2. Sikkerhedsoplysninger

• This product is intended for use with dogs weighing 15 to 100 pounds.
• Do not use the training collar on puppies under 6 months old.
• Avoid leaving the collar on the dog for more than 12 hours per day to prevent skin irritation.
• Tjek regelmæssigt din hunds hals for tegn på irritation eller sår. Hvis der opstår irritation, skal brugen ophøre, indtil huden er helet.
• The static stimulation should be used responsibly and only when necessary. Always start with the lowest effective level.
• Ensure the collar fits snugly but not too tightly. You should be able to fit two fingers comfortably under the strap.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

• 1 x Dog Training Collar Receiver
• 1 x fjernbetjening
• 1 x Rechargeable Bark Collar
• 1 x Adjustable Nylon Strap (for Training Collar)
• 1 x Adjustable Nylon Strap (for Bark Collar)
• 1 x USB Charging Cable (Micro USB)
• 1 x Testlampeværktøj
• Contact Points (short and long)
• Brugermanual

Image: The complete bundle including the remote transmitter, the training collar receiver, and the automatic bark control collar.

4. Produktet er slutview

4.1. Training Collar Components

• Fjernsender: Used to send commands (beep, vibration, static) to the training collar receiver. Features a display for mode and intensity levels, and buttons for various functions.
• Training Collar Receiver: Worn by the dog, receives signals from the remote and delivers the chosen stimulation. Equipped with contact points for static correction.

4.2. Bark Collar Components

• Bark Collar Unit: An automatic collar that detects barking and delivers corrective feedback (beep, vibration, or static) based on its internal settings. Features intelligent noise filtering to prevent false triggers.

5. Opsætning

5.1. Opladning af enhederne

Before first use, fully charge the remote transmitter, training collar receiver, and bark collar. Use the provided USB charging cable. A full charge typically takes 2-3 hours.

• Fjernsender: Batteriindikatoren på displayet viser opladningsstatus.
• Training Collar Receiver: An indicator light will show charging status.
• Bark Collar: An indicator light will show charging status.

Image: The remote and bark collar highlighting their long-lasting battery life and easy Micro USB charging port. The remote offers up to 45 days standby, and the receiver up to 15 days.

5.2. Pairing the Training Collar Receiver and Remote

1. Tænd for fjernsenderen.
2. Turn on the training collar receiver.
3. Press and hold the power button on the receiver until the indicator light flashes rapidly.
4. Within 10 seconds, press the 'Beep' button on the remote. The receiver light will stop flashing, indicating successful pairing.
5. If pairing multiple receivers, repeat the process for each additional receiver, ensuring each is assigned a different dog channel on the remote (up to 9 dogs).

5.3. Fitting the Collars

Proper fit is crucial for effectiveness and comfort.

• Træningshalsbånd: Place the receiver unit on the dog's neck, centered below the chin. The contact points should touch the skin. Adjust the strap so it is snug but not restrictive. You should be able to fit two fingers between the strap and your dog's neck.
• Bark Collar: Position the bark collar unit on the dog's neck, ensuring the sensor is near the vocal cords. Adjust the strap for a snug fit, similar to the training collar.

Image: A visual representation of various dog breeds and sizes, illustrating the adjustable strap design suitable for dogs weighing between 7 and 100 lbs.

6. Betjeningsvejledning

6.1. Dog Training Collar TC01

The training collar offers 5 safe training modes to customize your experience.

Image: A person training a dog using the remote, illustrating the five available training modes: Vibrate, Keypad Lock, 0-99 level static, Multiple Control, and Beep.

• Bip-tilstand: Delivers an audible tone. Often used as a warning or for positive reinforcement.
• Vibrationstilstand: Provides a non-harmful vibration. Effective for attention-getting or mild correction.
• Static Mode (0-99 Levels): Delivers a static pulse. Adjustable intensity from 0 (no static) to 99 (maximum static). Start at the lowest effective level and increase gradually if needed. Use the '+' and '-' buttons on the remote to adjust.
• Tastaturlås: Prevents accidental button presses. Activate/deactivate using the dedicated lock button on the remote.
• Multiple kontrol: The remote can control up to 9 individual training collar receivers. Use the channel selection button to switch between dogs.

6.2. Rechargeable Bark Collar

The bark collar automatically detects and corrects excessive barking. It features intelligent noise filtering to minimize false triggers from other sounds.

Image: A dog wearing the bark collar, illustrating the dual bark control modes (Vibration and Static) and 5 levels of adjustable bark sensitivity. LED lights show real-time operating status.

• Automatisk drift: The collar activates automatically when it detects your dog's bark. No remote is needed for this collar.
• Dual Modes (Vibration & Static): The collar can be set to deliver either vibration or static correction. Refer to the collar's specific buttons or switches to select the desired mode.
• Sensitivity Levels (7 Levels): Adjust the sensitivity to barking to suit your dog's barking habits and environment. A higher sensitivity level means the collar will trigger with softer barks. Use the sensitivity adjustment button on the collar.
• Intelligent Noise Filtering: Designed to distinguish your dog's bark from other environmental noises, reducing false corrections.

Image: Two dogs, one barking loudly and another wearing the bark collar, demonstrating the intelligent noise filtering capability that optimizes anti-interference.

7. Vedligeholdelse

• Rensning: Wipe the collars and remote with a damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Vandtæthed: Both collars are IP67 waterproof, meaning they can withstand splashes, rain, and even brief immersion. However, prolonged submersion is not recommended. Ensure charging ports are sealed when not charging.

Image: A dog playing in water while wearing the collar, demonstrating its IP68 waterproof capability, suitable for various outdoor conditions.
• Batteripleje: Recharge the devices regularly, even if not in frequent use, to maintain battery health. Avoid fully draining the batteries for extended periods.
• Opbevaring: Opbevar apparaterne et køligt og tørt sted, når de ikke er i brug.

8. Fejlfinding

8.1. Training Collar Issues

• Halsbåndet reagerer ikke på fjernbetjeningen:
  • Check if both devices are charged and turned on.
  • Ensure the remote and receiver are paired correctly (refer to Section 5.2).
  • Verify the remote is on the correct dog channel.
  • Check the range; the training collar has a range of up to 1800 feet. Obstacles can reduce this.
• No static correction:
  • Ensure the contact points are making good skin contact. Trim long fur if necessary.
  • Increase the static level on the remote.
  • Use the test light tool to verify the static function.

8.2. Bark Collar Issues

• Collar not activating when dog barks:
  • Ensure the collar is charged and turned on.
  • Adjust the sensitivity level to a higher setting.
  • Check the fit; the collar must be snug with the sensor positioned correctly.
• Collar activating without dog barking (false triggers):
  • Adjust the sensitivity level to a lower setting.
  • Ensure the collar is not rubbing against other objects or making contact with other dogs.

9. Specifikationer

10. Garanti og support

DOG CARE products are manufactured with quality and reliability in mind. For specific warranty information, please refer to the warranty card included with your product or visit the official DOG CARE website. If you encounter any issues or have questions regarding the use or maintenance of your Dog Training Collar TC01 & Rechargeable Bark Bundle, please contact DOG CARE customer support through the contact information provided on the product packaging or webwebsted.