Timex Herre Ironman Triathlon Adrenaline Ana-digi 46mm Ur Brugermanual

1. Opsætning

Upon receiving your Timex Ironman Triathlon Adrenaline watch, follow these steps for initial setup.

1.1 Indstilling af tid og dato

Your watch features both analog hands and a digital display. Both need to be set for accurate timekeeping.

1. Digital Time/Date: Tryk på MODE button repeatedly until the desired setting mode (e.g., Time Set, Date Set) is displayed. Use the INDSTIL/GENKALD or STOP/NULSTIL buttons to adjust values. Confirm settings by pressing MODE again or waiting for the watch to exit the setting mode automatically.
2. Analog Hands: Pull the crown (the small knob on the side of the watch) out to the first or second position (refer to the diagram below for specific crown positions). Rotate the crown to move the analog hands to the correct time. Push the crown back in to resume timekeeping.

1.2 Batterioplysninger

The watch comes with a Lithium Metal battery pre-installed. If the digital display is dim or unresponsive, the battery may need replacement. Refer to the Maintenance section for more details.

2. Betjeningsvejledning

Understand the various functions and how to use the buttons on your Timex Ironman watch.

2.1 Knapfunktioner

• MODE Button (Left Side): Cycles through different display modes such as Time, Date, Chronograph, Timer, and Alarm. Also used to confirm settings.
• SET/RECALL Button (Top Right): Used to adjust values during setting modes and to recall stored data (e.g., lap times).
• INDIGLO Button (Top Left): Activates the INDIGLO night-light for illumination of the digital display.
• STOP/RESET-knap (nederst til højre): Used to stop and reset functions like the chronograph or timer.
• START/LAP Button (Bottom Left): Used to start functions like the chronograph or timer, and to record lap times.

2.2 Digital Display Modes

Tryk på MODE knappen for at gå gennem følgende tilstande:

• Tidstilstand: Displays current time (hour, minute, second), day of the week, and date.
• Kronograftilstand: A stopwatch function for measuring elapsed time, lap times, and split times. Use START/LAP to begin/record laps and STOP/NULSTIL to stop/reset.
• Timertilstand: A countdown timer. Set the desired countdown duration using the INDSTIL/GENKALD og STOP/NULSTIL buttons in setting mode.
• Alarmtilstand: Set up to two daily alarms. The alarm will sound at the set time.

2.3 INDIGLO Natlampe

Tryk på INDIGLO button (top left) to illuminate the digital display for easy viewunder dårlige lysforhold. Lyset vil forblive tændt i et par sekunder.

3. Vedligeholdelse

Proper care ensures the longevity and performance of your watch.

3.1 Rengøring

Tør urkassen og remmen af ​​med en blød kludamp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly. Avoid harsh chemicals or abrasive materials.

3.2 Vandtæthed

Your watch is water resistant up to 100 meters (330 feet). This makes it suitable for showering, swimming, and snorkeling. However, it is not recommended for scuba diving or high-impact water sports. Do not operate buttons underwater.

3.3 Udskiftning af batteri

The watch uses one Lithium Metal battery (CR2016). When the display becomes dim or functions are erratic, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.

3.4 Sikkerhedsoplysninger

• Avoid high-impact water activities.
• Holdes væk fra små børn.
• Dispose of batteries safely according to local regulations.

4. Fejlfinding

Hvis du støder på problemer med dit ur, kan du se følgende almindelige problemer og løsninger.

• Det digitale display er blankt eller svagt: This usually indicates a low battery. Replace the battery as described in the Maintenance section.
• Analog Hands Do Not Match Digital Time: The analog hands and digital display are set independently. Follow the instructions in Section 1.1 to synchronize both.
• Buttons Are Unresponsive: Ensure the watch is not in a locked mode (if applicable, consult full manual for specific model lock features). A low battery can also cause unresponsive buttons. Try replacing the battery.
• Chronograph Resets Unexpectedly: This may indicate a software glitch or low power. Try replacing the battery. If the issue persists, a factory reset (if available for your model, consult full manual) or professional service may be required.
• Time is Inaccurate (Losing/Gaining Time): This could be due to a low battery or a need for recalibration. Replace the battery first. If the problem continues, professional service is recommended.
• INDIGLO Night-Light Not Working: Check the battery. If the battery is low, the night-light may be the first function to fail.

If these steps do not resolve the issue, please contact Timex customer support.

5. Specifikationer

6. Garanti og support

6.1 Producentens garanti

Your Timex watch is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please retain your proof of purchase for warranty claims.

6.2 Kundesupport

For detailed warranty information, service inquiries, or additional support, please visit the official Timex webwebsted eller kontakt deres kundeserviceafdeling.

Du kan finde mere information og kontaktoplysninger på Timex-butik på Amazon.