Z-Edge UG34W 34-tommer UWQHD 165Hz IPS Ultrawide Gaming Monitor Brugermanual

Indledning

This manual provides essential instructions for the setup, operation, and maintenance of your Z-Edge UG34W 34-inch UWQHD 165Hz IPS Ultrawide Gaming Monitor. Please read this manual thoroughly before using the product to ensure proper function and safety.

Sikkerhedsoplysninger

• Udsæt ikke skærmen for regn eller fugt for at undgå brand- eller stødfare.
• Åbn ikke skærmen casing. Der er ingen dele indeni, som kan serviceres af brugeren. Overlad al service til kvalificeret personale.
• Placer skærmen på en stabil, plan overflade for at forhindre den i at falde.
• Sørg for tilstrækkelig ventilation omkring skærmen. Bloker ikke ventilationsåbningerne.
• Brug kun den strømadapter, der følger med skærmen.
• Frakobl strømkablet under tordenvejr eller når apparatet ikke bruges i længere perioder.

Pakkens indhold

Bekræft at alle komponenter er til stede:

• Z-Edge UG34W Monitor
• Monitorstativ (base og hals)
• Strømadapter
• DisplayPort-kabel
• Brugervejledning (dette dokument)
• Skruer til stativmontering

Opsætning

1. Montering af stativ

1. Tag forsigtigt skærmen ud af emballagen, og beskyt skærmen.
2. Fastgør stativets hals til skærmen med de medfølgende skruer.
3. Attach the stand base to the stand neck and secure it with the designated screw. Ensure all screws are tightened to prevent instability.
4. Placer den samlede skærm på en stabil, plan overflade.

Note: The monitor supports VESA mounting (75x75mm) for wall or arm mounting. Ensure the VESA mount is compatible and securely installed.

Figur 1: Forside view of the Z-Edge UG34W monitor, highlighting its 34-inch IPS UWQHD (3440x1440) display with 165Hz refresh rate and 21:9 aspect ratio.

2. Tilslutning til enheder

Tilslut dine enheder til skærmen ved hjælp af de relevante porte:

• DisplayPort (DP1.4): For optimal performance, including 165Hz refresh rate and FreeSync. Use the included DP cable.
• HDMI (HDMI2.0): Supports up to 100Hz refresh rate.
• USB: For connecting peripherals (functionality not detailed in provided data, assuming pass-through or service).
• Lydudgang: Tilslut eksterne højttalere eller hovedtelefoner.
• DC 12V indgang: Tilslut strømadapteren.

Figur 2: Bagside view of the monitor displaying the DC 12V input, USB port, HDMI 2.0, DisplayPort 1.4, and Audio Out ports, along with the 75x75mm VESA mounting points and RGB breathing light.

Betjeningsvejledning

1. Tænd/sluk

Press the power button, usually located on the back or bottom of the monitor, to turn it on or off. The RGB breathing light will indicate power status.

2. On-Screen Display (OSD) menu

Use the joystick or buttons (location varies by model, typically on the back or bottom right) to navigate the OSD menu. The OSD allows you to adjust various display settings.

3. Skærmindstillinger

• Opløsning: The native resolution is 3440x1440. Ensure your connected device is set to this resolution for optimal clarity.
• Opdateringshastighed: Set your device's display settings to 165Hz when connected via DisplayPort for the smoothest experience. HDMI 2.0 supports up to 100Hz.
• Farve: The IPS panel offers 8-bit color depth and 99% sRGB coverage. Adjust brightness (300 cd/m²) and contrast (1000:1) via the OSD for preferred visual output.
• HDR-understøttelse: The monitor supports HDR10. Enable HDR in your operating system settings for compatible content.

Figure 3: The monitor showcasing its IPS panel benefits, including 100% sRGB, 300 cd/m² brightness, and 1000:1 contrast ratio, with a vibrant image of a UFO over a landscape.

4. Spilfunktioner

• Adaptive Sync (FreeSync): This technology eliminates screen tearing and stuttering. Enable FreeSync in the OSD menu and on your graphics card settings for compatible GPUs.
• Svartid: The monitor features a 1ms MPRT response time for reduced motion blur.
• Spiltilstande: Access pre-set game modes (e.g., FPS, RTS) and a built-in crosshair via the OSD to optimize visuals for different game genres.

Figure 4: An image illustrating the 165Hz refresh rate and 1ms MPRT response time, with a dirt bike rider in motion.

5. Ultrawide Features (PIP & PBP)

The 21:9 ultrawide screen supports Picture-in-Picture (PIP) and Picture-by-Picture (PBP) functions, allowing you to display content from two separate input sources simultaneously.

• PIP (billede-i-billede): Displays a smaller window from a second source over the main display.
• PBP (Picture-by-Picture): Divides the screen into two equal halves, each displaying a separate input source.

Access and configure these modes through the OSD menu.

Figure 5: The monitor displaying content from two sources side-by-side (PBP mode), illustrating the split-screen functionality.

6. RGB Breathing Light

The monitor features dynamic RGB breathing lights on the rear. These can be customized or turned off via the OSD menu to suit your preference.

Opretholdelse

• Rengøring af skærmen: Tør forsigtigt skærmen af ​​med en blød, fnugfri klud. Brug en skærmspecifik rengøringsopløsning på kluden, ikke direkte på skærmen, til genstridige pletter.
• Rengøring af Casing: Brug en blød, tør klud til at tørre skærmen afasing. Undgå slibende rengøringsmidler.
• Opbevaring: If storing the monitor for an extended period, disconnect it from power, cover it to protect from dust, and store in a cool, dry place.

Fejlfinding

Specifikationer

Garanti og support

This Z-Edge monitor comes with a 1 års producentgaranti. For technical support, warranty claims, or further assistance, please contact Z-Edge customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt.

Gem venligst din købsbevis af garantihensyn.