Indledning
This manual provides essential information for the safe assembly, operation, and maintenance of your PASYOU S30B Magnetic Belt-Drive Exercise Bike. Please read this manual thoroughly before using the equipment and retain it for future reference. Proper use and maintenance will ensure optimal performance and longevity of your exercise bike.
Sikkerhedsoplysninger
Overhold følgende sikkerhedsforanstaltninger for at forhindre personskade og beskadigelse af udstyret:
- Kontakt en læge, før du starter et træningsprogram.
- Sørg for, at alle bolte og møtrikker er forsvarligt spændt før hver brug.
- Place the exercise bike on a flat, stable surface. Use a mat to protect flooring.
- Hold børn og kæledyr væk fra udstyret under drift.
- Wear appropriate exercise attire and footwear. Avoid loose clothing that could get caught in moving parts.
- The maximum user weight capacity for this bike is 150 kg (330 lbs).
- Use the emergency brake function immediately if you feel unwell or need to stop quickly.
- Forsøg ikke at modificere udstyret.
Pakkens indhold
Verify that all components are present and undamaged before assembly. If any parts are missing or damaged, contact customer support.
- Hovedramme
- Frontstabilisator
- Bageste stabilisator
- Styrestolpe
- Styr
- Sadelpind
- Sæde
- Pedaler (venstre og højre)
- LCD-skærm
- Tablet holder
- Vandflaskeholder
- Hardware-sæt (bolte, skiver, møtrikker, værktøj)
Opsætning og montering
Assembly typically takes approximately 20-30 minutes. Follow the numbered steps below. All necessary tools are included in the package.
- Fastgør stabilisatorer: Secure the front and rear stabilizers to the main frame using the provided bolts and washers. Ensure they are firmly tightened.
- Installer pedaler: Identificér venstre (V) og højre (H) pedal. Venstre pedalskruer drejes mod uret, og højre pedalskruer drejes med uret. Spænd dem godt fast til pedalarmene.
- Monter sæde: Attach the seat to the seat post, then insert the seat post into the main frame. Do not tighten the adjustment knob yet.
- Installer styr: Attach the handlebars to the handlebar post. Connect any sensor wires if present. Insert the handlebar post into the main frame. Do not tighten the adjustment knob yet.
- Attach LCD Monitor and Tablet Holder: Secure the LCD monitor to the handlebar assembly. Connect the sensor wires from the main frame to the monitor. Attach the tablet holder above the monitor.
- Install Water Bottle Holder: Attach the water bottle holder to the designated area on the main frame.
- Afsluttende kontrol: Ensure all connections are secure and the bike is stable. Adjust the leveling stoppers on the stabilizers if the floor is uneven.
Image: Fully adjustable dimensions for various user heights and inseam lengths.
Betjeningsvejledning
Justering af sæde og styr
The PASYOU S30B offers 4-way seat adjustment (up/down, forward/backward) and 2-way handlebar adjustment (up/down) to accommodate users with different heights (150cm-190cm / 4.92ft-6.23ft) and inseam lengths (70cm-92cm / 27.5in-36.2in).
- To adjust the seat or handlebars, loosen the corresponding adjustment knob, move the component to the desired position, and then firmly tighten the knob.
- Ensure the seat is at a height where your knee has a slight bend at the bottom of the pedal stroke.
Image: Seat and handlebar adjustment points for personalized fit.
Justering af magnetisk modstand
The bike features a micro-adjustable magnetic resistance system for a smooth and quiet workout.
- Turn the red resistance knob clockwise to increase resistance, making pedaling harder.
- Turn the red resistance knob counter-clockwise to decrease resistance, making pedaling easier.
- The magnetic resistance system provides a wide range of intensity levels suitable for beginners to advanced users.
Image: Resistance adjustment knob and emergency brake function.
Brug af LCD-skærmen
The integrated LCD monitor tracks your workout data. It requires 2 AAA batteries (not included).
- Funktioner: The monitor displays Time, Speed, RPM (Revolutions Per Minute), Distance, Calories Burned, and Odometer.
- SCAN-tilstand: The monitor will automatically cycle through all functions, displaying each for a few seconds.
- Mode knap: Press the 'MODE' button to select a specific function to display continuously or to activate SCAN mode.
- Nulstil: Press and hold the 'MODE' button for a few seconds to reset all values (except Odometer).
- Automatisk tænd/sluk: The monitor will turn on automatically when activity is detected or a button is pressed. It will turn off after a few minutes of inactivity.
Image: LCD monitor displaying workout data with an iPad on the holder.
Nødstop
For immediate cessation of the flywheel, firmly press down on the red resistance knob. This acts as an emergency brake.
Opretholdelse
Regelmæssig vedligeholdelse sikrer din motionscykels lange levetid og sikre drift.
- Rensning: Tør cyklen af med annonceamp en klud efter hver brug for at fjerne sved og støv. Undgå slibende rengøringsmidler.
- Inspektion: Kontrollér regelmæssigt alle bolte, møtrikker og bevægelige dele for fastspænding og slid. Spænd eventuelle løse fastgørelseselementer.
- Bæltedrev: The belt-drive system is designed to be low-maintenance and does not require lubrication.
- Opbevaring: Opbevar cyklen et tørt, køligt sted væk fra direkte sollys og ekstreme temperaturer.
Fejlfinding
If you encounter issues with your exercise bike, refer to the following table:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Cyklen er ustabil eller vakler | Uneven floor surface; loose stabilizers | Adjust the leveling stoppers on the stabilizers; ensure all stabilizer bolts are tight. |
| Pedaling feels rough or noisy | Loose pedals; internal component issue (rare for magnetic system) | Ensure pedals are securely tightened. If noise persists, contact customer support. |
| Modstanden ændrer sig ikke | Resistance knob not properly engaged or internal mechanism issue | Sørg for, at modstandsknappen drejer frit. Hvis problemet fortsætter, skal du kontakte kundesupport. |
| LCD-skærmen viser ikke | Afbrændte batterier; løs sensorforbindelse | Replace AAA batteries. Check that sensor wires are securely connected to the monitor. |
Specifikationer
- Model: S30B
- Drivsystem: Bælt Drive
- Modstandsmekanisme: Magnetisk
- Materiale: Legeret stål
- Farve: Sort
- Maksimal vægtkapacitet: 150 kilogram (330 pund)
- Produktmål (L x B x H): 100.5 x 50.5 x 110 cm (ca. 40 x 20 x 43 tommer)
- Varens vægt: 26.5 kilo
- Anbefalet brugerhøjde: 150cm - 190cm (4.92ft - 6.23ft)
- Inseam Length Range: 70 cm - 92 cm (27.5 tommer - 36.2 tommer)
- Strømkilde: Pedaldrevet (ikke-elektrisk)
- Monitor batterier: 2 x AAA (medfølger ikke)
Billede: Overview of the PASYOU S30B Exercise Bike.
Transport
The PASYOU S30B is equipped with transport wheels for easy relocation.
- To move the bike, firmly grasp the handlebars.
- Tilt the bike forward until it rests on its front transport wheels.
- Carefully roll the bike to its desired location.
- Lower the bike gently back onto its stabilizers.
Image: Transport wheels for easy movement.
Garanti og support
PASYOU offers a one-year free replacement on all parts for new PASYOU bikes. Our customer support team is committed to providing 100% satisfactory solutions and will respond to inquiries within 24 hours.
For any issues, questions, or to claim warranty service, please contact PASYOU customer support through the retailer where you purchased the product or visit the official PASYOU brand store online.
Kontaktoplysninger: Refer to your purchase documentation or the PASYOU brand store for the most current support contact details.
