1. Introduktion
Thank you for choosing the VEVOR 60L Oil-Free Air Compressor. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new air compressor. Please read this manual thoroughly before use and retain it for future reference.
This oil-free air compressor is designed for a variety of applications, including tire inflation, automotive repair, spray painting, and woodworking. Its robust design and quiet operation make it suitable for both professional and DIY tasks.
2. Sikkerhedsinstruktioner
ADVARSEL: Manglende overholdelse af disse sikkerhedsinstruktioner kan resultere i alvorlig personskade eller materielle skader.
- Brug altid passende personlige værnemidler, herunder sikkerhedsbriller, høreværn og handsker.
- Sørg for, at kompressoren er placeret på en stabil, plan overflade i et godt ventileret område.
- Betjen ikke kompressoren i vådt eller damp forhold, eller i nærheden af brandfarlige væsker eller gasser.
- Before performing any maintenance or adjustments, always disconnect the power supply and release all air pressure from the tank.
- Ret aldrig trykluft mod dig selv eller andre.
- Regularly inspect the power cord, air hose, and all connections for damage. Replace damaged parts immediately.
- Undlad at ændre kompressoren eller dens komponenter. Brug kun originale VEVOR-reservedele.
- Hold børn og uautoriseret personale væk fra driftsområdet.
3. Pakkens indhold
Ved udpakning skal du kontrollere, at alle nedenstående varer er til stede og ubeskadigede:
- 1 x VEVOR 60L Oil-Free Air Compressor
- 1 x brugermanual
- 2 x G1/2 Air Filters with Plastic Shell
- 2 x trædepuder
- 2 x 6-inch Wheels
4. Opsætning
Follow these steps to set up your air compressor before initial use:
- Udpakning: Tag forsigtigt kompressoren ud af emballagen. Undersøg den for eventuelle transportskader.
- Attach Wheels and Foot Pads: Securely attach the two 6-inch wheels to the designated axle points on one side of the tank. Install the two rubber foot pads on the opposite side to ensure stability.
- Install Air Filters: Screw the two G1/2 air filters into the air intake ports on the motor assembly. Ensure they are hand-tightened.
- Placering: Place the compressor on a firm, level surface with adequate ventilation around it.
- Elektrisk tilslutning: Tilslut netledningen til en jordet stikkontakt med den korrekte lydstyrke.tage (220V AC).
- Initial Run (Break-in): Before connecting any air tools, open the tank drain valve (usually located at the bottom of the tank) and run the compressor for approximately 15-20 minutes. This helps to break in the motor and piston rings. Close the drain valve after this initial run.
Figur 4.1: Forside view of the VEVOR 60L oil-free air compressor, displaying its robust black tank, the dual motor assembly, control panel with pressure gauges, and sturdy wheels for easy movement and positioning.
5. Betjeningsvejledning
Når kompressoren er sat op, skal du følge disse trin for betjening:
- Tænd: Ensure the power switch is in the 'OFF' position. Plug the compressor into a suitable power outlet. Turn the power switch to 'ON'. The compressor will start to build pressure.
- Trykjustering: The compressor features a pressure regulator. Turn the regulator knob clockwise to increase output pressure and counter-clockwise to decrease it. Monitor the output pressure gauge to set the desired working pressure for your air tool.
- Tilslutning af luftværktøj: Attach your air hose to the quick-connect coupler on the compressor. Then, connect your air tool to the other end of the hose.
- Operation: Begin using your air tool. The compressor will cycle on and off automatically to maintain the set pressure in the tank.
- Sluk: When finished, turn the power switch to 'OFF'. Disconnect the air tool and hose.
- Afløbsfugt: Always drain moisture from the air tank after each use to prevent rust and prolong the tank's life. Slowly open the drain valve at the bottom of the tank until all air and moisture are expelled. Close the valve tightly afterward.
Figure 5.1: This composite image showcases the wide range of applications for the VEVOR air compressor, including inflating tires, performing automotive repairs, spray painting, and powering nail guns for woodworking projects, highlighting its versatility with multiple air tools.
Figure 5.2: This image shows the VEVOR air compressor in action, providing compressed air to a nail gun for a woodworking task, illustrating its utility in various DIY and professional applications.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på din luftkompressor.
- Daglig: Drain moisture from the air tank.
- Weekly/After 20 Hours of Use: Inspect air filters. Clean or replace if dirty or clogged. Dirty filters can reduce compressor efficiency and lifespan.
- Monthly/After 50 Hours of Use: Check all fasteners and connections for tightness. Inspect the power cord and air hose for wear or damage.
- Generel rengøring: Keep the compressor clean and free of dust and debris. Use a dry cloth to wipe down surfaces. Do not use solvents or harsh chemicals.
Figure 6.1: This diagram highlights the compressor's fast inflation capability and details the durable air intake hose, constructed with high-temperature resistant silicone and an outer layer of braided stainless steel mesh for enhanced protection and longevity. Regular inspection of these components is crucial for maintenance.
7. Fejlfinding
Se dette afsnit for almindelige problemer og løsninger på disse:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Kompressoren starter ikke | Ingen strøm, udløst afbryder, defekt kontakt | Kontrollér strømtilslutningen, nulstil afbryderen, kontakt service, hvis afbryderen er defekt. |
| Lavt lufttryk / Langsom trykopbygning | Air leak, clogged air filter, worn piston rings | Check for leaks (use soapy water), clean/replace air filter, contact service for internal issues. |
| Overdreven støj eller vibrationer | Loose components, uneven surface, motor issue | Tighten all fasteners, ensure compressor is on a level surface, contact service if motor issue. |
| Luft lækker fra sikkerhedsventilen | Tank pressure too high, faulty safety valve | Ensure pressure regulator is set correctly. If pressure is not excessively high, safety valve may be faulty and needs replacement by qualified personnel. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact VEVOR customer support.
8. Specifikationer
Detailed technical specifications for the VEVOR 60L Oil-Free Air Compressor:
| Feature | Specifikation |
|---|---|
| Modelnummer | FB1500D-221BS-10C60 |
| Tank kapacitet | 15 gallons / 60 liter |
| Magt | 1.25 kW (2 HP) |
| Hastighed | 1400 RPM (EU/AU) / 1680 RPM (US) |
| Flowhastighed | 5.3 CFM |
| Maks. Lufttryk | 125 PSI |
| Cold Flow Rate | 5.3 SCFM ± 10% at 90 PSI |
| Støjniveau | ≤ 78 dB |
| Materiale | Alloy Steel (Q235B Structural Steel for tank) |
| Voltage | 220V AC |
| Varens vægt | 37.0 kg / 81.57 lbs |
| Dimensioner (L x B x H) | 720 x 390 x 710 mm / 28.3 x 15.4 x 28.0 tommer |
Figur 8.1: Side view of the VEVOR 60L oil-free air compressor, detailing its physical dimensions and presenting a concise table of technical specifications.
Figure 8.2: This image illustrates the internal components of the VEVOR air compressor's motor, emphasizing its oil-free design and high power output of 1.32KW (1.25KW for EU/AU) and 1400 RPM speed, ensuring efficient and maintenance-free operation.
Figure 8.3: This image demonstrates the advanced noise-reduction features of the compressor, including a thick sound muffler, rubber muffler pipe, and filter cotton, which collectively reduce operational noise to a quiet 78 dB, comparable to a television.
Figur 8.4: En udskæring view of the air tank reveals its robust 3-layer construction, designed for safety and leak-free assurance. The layers include a rust and wear-resistant coating, a plastic powder attachment layer, and a core of Q235B structural steel, ensuring durability and resistance to high pressure.
9. Officielle produktvideoer
Der er ingen officielle produktvideoer tilgængelige til indlejring på nuværende tidspunkt.
10. Garanti og support
VEVOR-produkter er designet til holdbarhed og ydeevne. For garantioplysninger, teknisk support eller serviceforespørgsler henvises til garantikortet, der følger med dit produkt, eller besøg den officielle VEVOR-side. website. Please have your model number (FB1500D-221BS-10C60) and purchase date available when contacting support.