1. Vigtige sikkerhedsinstruktioner
Please read all instructions carefully before installing and using this heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or death. Keep this manual for future reference.
- Elektrisk tilslutning: This heater requires a 240V hardwired connection. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Beliggenhed: Do not install the heater directly below a permanent electrical outlet. Maintain minimum clearances from walls, furniture, and other combustible materials as specified in the installation section.
- Vandeksponering: Do not install the heater in areas where it may be exposed to water spray or splashes. This unit is designed for indoor use only.
- Overvågning: Nøje opsyn er nødvendigt, når en varmeovn bruges af eller i nærheden af børn eller handicappede, og når varmeovnen efterlades i drift og uden opsyn.
- Obstruktion: Indsæt eller lad ikke fremmedlegemer trænge ind i ventilations- eller udsugningsåbninger, da dette kan forårsage elektrisk stød eller brand eller beskadige varmeren.
- Opretholdelse: Disconnect power before servicing or cleaning the heater.
2. Produktet er slutview
The Stelpro SOA2002WCW is a 2000W wall-mounted fan heater from the OASIS Series, designed for efficient and quiet heating in various indoor spaces. It features a durable construction and is controlled via an external wall thermostat (sold separately).
This image shows the Stelpro SOA2002WCW Wall Heater from a front-side angle, highlighting its compact and modern white design.
Nøglefunktioner:
- High-Efficiency Heating: Delivers up to 2000W of heat on a 240V circuit (1500W on 208V).
- Ultra-stille drift: Equipped with a centrifugal fan for minimal noise output.
- Holdbart design: Constructed with a high-performance polymer cabinet and satin-finish steel front.
- Fleksibel installation: Can be recessed or surface mounted.
- Termostatstyring: Compatible with an external wall thermostat (sold separately).
The Stelpro SOA2002WCW Wall Heater is shown installed on a wall in a contemporary bathroom setting, demonstrating its integration into a living space.
3. Specifikationer
| Feature | Detalje |
|---|---|
| Model | SOA2002WCW |
| Mærke | Stelpro |
| Strøm/Wattage | 2000W (240V) / 1500W (208V) |
| Voltage | 240 volt |
| Farve | Hvid |
| Varens vægt | 4.8 kg |
| Produktmål (D x B x H) | 12.1D x 28.6W x 40.6H Centimetres (4 1/8" D x 11 1/4" W x 15 13/16" H) |
| Monteringstype | Vægmontering (indbygget eller overflademonteret) |
| Særlige funktioner | Adjustable Temperature (via external thermostat), Energy Efficient, Fast Heating, Lightweight, Noiseless |
This image provides a detailed dimensional drawing of the Stelpro SOA2002WCW Wall Heater, including measurements in inches and millimeters for height, width, and depth.
A chart titled 'How to choose your heating device?' which provides guidance on determining the required wattage based on the area to be heated in square feet.
4. Installation (Opsætning)
The Stelpro SOA2002WCW Wall Heater is designed for permanent installation and requires a 240V hardwired electrical connection. It can be either recessed into the wall or surface-mounted.
4.1 Tjekliste før installation:
- Ensure power to the circuit breaker is OFF before starting any electrical work.
- Kontroller, at forsyningen voltage matcher varmelegemets krav (240V).
- Confirm you have an external wall thermostat (sold separately) for control.
- Saml de nødvendige værktøjer: skruetrækker, afisoleringstang, boremaskine, vaterpas, målebånd.
4.2 Monteringsmuligheder:
Forsænket installation: Requires cutting an opening in the wall according to the heater's dimensions. Ensure there are no studs or obstructions in the desired location.
Overflade installation: The heater can be mounted directly onto the wall surface. Ensure the mounting surface is flat and capable of supporting the heater's weight.
4.3 Elektrisk tilslutning:
This heater must be connected to a dedicated 240V circuit by a qualified electrician. The connection involves hardwiring the heater's supply wires to the building's electrical system within a junction box.
This diagram illustrates the required 240V hardwired electrical connection for the Stelpro SOA2002WCW Wall Heater, showing wires connecting within a junction box.
Refer to the detailed wiring diagram provided with the product packaging for specific connection points and wire colors. Ensure all connections are secure and insulated.
5. Betjening
The Stelpro SOA2002WCW Wall Heater operates in conjunction with an external wall thermostat (sold separately). This model does not include a built-in thermostat.
5.1 Første opstart:
- After installation is complete and verified, turn on the power at the circuit breaker.
- Set your external wall thermostat to the desired temperature.
- The heater will begin to operate, circulating warm air into the room.
5.2 Temperaturkontrol:
Adjust the temperature setting on your external wall thermostat to increase or decrease the heat output. The heater will cycle on and off to maintain the set temperature.
5.3 Ultra-Quiet Operation:
This heater is designed with a centrifugal fan to minimize operational noise, making it suitable for bedrooms and living areas where quietness is desired.
5.4 Heat Boost Mode:
The OASIS series heaters are equipped with a heat boost mode for rapid heating. This mode is typically activated via the external thermostat, if supported, or automatically when a significant temperature difference is detected.
6. Vedligeholdelse
Regular maintenance ensures optimal performance and longevity of your Stelpro wall heater. Always disconnect power at the circuit breaker before performing any maintenance.
6.1 Rengøring:
- Ydre: Tør de udvendige overflader af med en blød, damp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller kemiske spray, da disse kan beskadige overfladen.
- Luftindtag/-udløb: Periodically vacuum the air intake and outlet grilles to remove dust and debris. Ensure these openings are never blocked.
6.2 Annual Inspection:
It is recommended to have a qualified electrician inspect the heater and its electrical connections annually to ensure all components are in good working order and free from wear or damage.
7. Fejlfinding
Hvis din varmelegeme ikke fungerer korrekt, skal du se følgende tabel, før du kontakter kundesupport.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Varmeapparatet tænder ikke. | Ingen strømforsyning. Termostat indstillet for lavt. | Tjek afbryderen. Øg termostatindstillingen. |
| Utilstrækkelig varmeafgivelse. | Thermostat setting too low. Luftindtag/-udløb blokeret. Room size exceeds heater capacity. | Øg termostatindstillingen. Fjern eventuelle forhindringer. Ensure heater wattage is appropriate for the room area (refer to selection chart). |
| Usædvanlig støj under drift. | Løse komponenter. Affald i ventilator. | Disconnect power and inspect for loose parts. If debris is suspected, contact a qualified technician. |
| Varmeapparatet tænder/slukker for ofte. | Termostatens placering. Overophedningsbeskyttelse aktiveret. | Ensure thermostat is not in a drafty area or near another heat source. Check for blocked airflows. |
If the problem persists after attempting these solutions, please contact Stelpro customer support.
8. Garanti og support
Stelpro products are proudly made in Canada and are designed for quality and performance.
8.1 Garantioplysninger:
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Stelpro webwebsted. Gem din købsbevis til garantikrav.
8.2 Kundesupport:
If you require assistance with installation, operation, or troubleshooting, please contact Stelpro customer service:
- Telefon: +1 844-783-5776
- Adresse: 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 6L7, Canada
- Webwebsted: www.stelpro.com
