RUPES HLR15 BigFoot iBrid Excenterpoleringsmaskine Standardsæt Brugermanual

1. Introduktion

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your RUPES HLR15 BigFoot iBrid Random Orbital Cordless Polisher Standard Kit. Please read this manual thoroughly before using the product and retain it for future reference.

2. Sikkerhedsoplysninger

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This tool is designed for professional use. Improper use can lead to serious injury or damage to the tool and workpiece.

• Wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and gloves.
• Sørg for, at arbejdsområdet er godt oplyst og fri for forhindringer.
• Hold børn og omkringstående væk fra betjeningsområdet.
• Do not operate the polisher in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Fjern altid batteripakken, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.
• Use only RUPES recommended accessories and replacement parts.
• Do not expose the tool or battery pack to rain or wet conditions.
• Charge batteries only with the specified charger.
• Do not incinerate battery packs, even if they are severely damaged. They can explode in a fire.

3. Pakkens indhold

The RUPES HLR15 BigFoot iBrid Random Orbital Cordless Polisher Standard Kit includes the following items:

• RUPES HLR15 BigFoot iBrid Random Orbital Cordless Polisher
• Dual Battery Charger (Model: 9HC185LT)
• Two (2) 18V 5Ah Li-ion Rechargeable Batteries (Model: 9HB185LT)
• Instruktionsmanual

Image: RUPES HLR15 BigFoot iBrid Polisher Standard Kit showing the polisher, dual battery charger, and two 18V Li-ion batteries.

4. Produktet er slutview

The RUPES HLR15 BigFoot iBrid Polisher is a cordless random orbital tool designed for precision polishing and buffing tasks. It features advanced technology for reduced noise and vibration, an efficient brushless motor, and an anti-spinning ring for consistent performance.

Image: Diagram highlighting key features of the RUPES HLR15 polisher, including new gear technology, in-runner brushless motor, new eccentric set, anti-spinning ring, LED indicator, and 18V Li-ion battery.

Nøglekomponenter:

• In-Runner Brushless Motor: Provides high efficiency and maximum power output (350W) with superior ventilation.
• New Gear Technology: Engineered to reduce noise levels and vibrations for enhanced stability and precision.
• Anti-Spinning Ring: Reduces friction and heat, ensuring smooth operation and consistent rotation.
• 18V Li-ion Battery: 5 Ah capacity for prolonged operation.
• Dual Charger: Designed for fast charging, prioritizing the highest voltage batteri.

Image: The RUPES HLR15 polisher with an 18V 5Ah Li-ion battery inserted, ready for use.

Image: The RUPES dual battery charger with two 18V Li-ion batteries inserted, indicating charging status.

5. Opsætning

5.1. Batteriopladning

1. Connect the dual battery charger to a suitable power outlet.
2. Insert the 18V Li-ion batteries into the charging slots. Ensure they are fully seated.
3. Opladerens indikatorlamper viser opladningsstatus. Se opladerens specifikke manual for detaljerede indikatorer for indikatorerne.
4. Allow batteries to fully charge before first use.
5. Når opladningen er færdig, skal du fjerne batterierne fra opladeren.

5.2. Attaching the Backing Plate and Polishing Pad

The HLR15 uses RUPES PrecisionPro backing pads, designed for stability and control.

Billede: Underside view of a RUPES backing plate, showing the hook-and-loop surface for attaching polishing pads.

1. Ensure the polisher is turned off and the battery is removed.
2. Align the backing plate with the spindle on the polisher.
3. Securely fasten the backing plate. Some models may require a wrench (not included) to tighten.
4. Attach the desired RUPES polishing pad to the hook-and-loop surface of the backing plate, ensuring it is centered and firmly pressed.

Image: Diagram illustrating the features of RUPES PrecisionPro backing pads, including lower center of gravity, rubber border protection, and balancing versatility.

6. Betjeningsvejledning

6.1. Tænd/sluk

1. Insert a fully charged battery into the polisher until it clicks into place.
2. To turn on the polisher, press the power switch.
3. To turn off the polisher, release the power switch.

6.2. Hastighedsjustering

The HLR15 features a speed control dial to adjust the rotations per minute (RPM) for various applications.

Image: Detail of the speed control dial on the RUPES HLR15 polisher, allowing users to select the desired operating speed.

1. Rotate the speed control dial to select the desired speed setting (typically 1-5 or 1-6).
2. Start with a lower speed for initial product spreading or delicate surfaces, and increase as needed for correction.

6.3. Poleringsteknikker

For optimal results and to prevent damage, follow these general guidelines:

• Apply a small amount of polishing compound directly to the pad or workpiece.
• Place the pad flat on the surface before turning on the polisher.
• Move the polisher in a controlled, overlapping pattern, maintaining even pressure.
• Avoid excessive pressure, which can generate heat and reduce effectiveness.
• Regularly clean or replace polishing pads to maintain performance.
• Arbejd altid i et godt ventileret område.

7. Vedligeholdelse

7.1. Rensning

• After each use, remove the battery and clean the polisher body with a soft, damp klæde.
• Remove and clean polishing pads thoroughly according to their specific instructions.
• Ensure all vents are clear of dust and debris to prevent overheating.
• Brug ikke hårde kemikalier eller slibende rengøringsmidler.

7.2. Batteripleje

• Opbevar batterier på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Do not allow batteries to fully discharge for extended periods.
• Charge batteries regularly, even if not in use, to maintain their lifespan.
• If a battery is damaged or not holding a charge, dispose of it properly according to local regulations.

7.3. Opbevaring

• Store the polisher, batteries, and charger in a clean, dry, and secure location, out of reach of children.
• Remove the battery from the polisher before storage.
• If storing for an extended period, ensure batteries are partially charged (around 50%) to preserve their health.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official RUPES webwebstedet. Behold din købskvittering som købsbevis.

Official RUPES Webwebsted: www.rupes.com