1. Introduktion
Thank you for choosing the MARVO Pulz HG9086W Wireless Gaming Headset. This manual provides essential information for setting up, operating, and maintaining your headset. Please read it carefully before use to ensure optimal performance and longevity of your device.
The MARVO Pulz HG9086W offers versatile connectivity options including 2.4GHz wireless, Bluetooth 5.3, and a traditional wired connection, providing flexibility for various gaming and audio needs.
2. Sikkerhedsoplysninger
- Undgå langvarig lytning ved høj lydstyrke for at forhindre høreskader.
- Udsæt ikke headsettet for ekstreme temperaturer, fugtighed eller ætsende stoffer.
- Hold enheden væk fra vand og andre væsker.
- Do not attempt to disassemble or modify the headset. This may void the warranty and cause damage.
- Bortskaf produktet og dets batteri på en ansvarlig måde i henhold til lokale regler.
3. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- MARVO Pulz HG9086W Wireless Gaming Headset
- Aftagelig mikrofon
- 2.4 GHz USB trådløs dongle
- USB-C ladekabel
- 3.5 mm lydkabel
- Brugervejledning (dette dokument)
4. Produktet er slutview
Familiarize yourself with the components and controls of your MARVO Pulz HG9086W headset.
Image: Left earcup showing control buttons and ports.
Headsetkomponenter:
- Justerbart pandebånd: For behagelig pasform.
- Ørekopper: Polstret for komfort, med 40 mm drivere.
- RGB-baggrundsbelysning: Placeret på ørekopperne.
- Aftagelig mikrofonport: Til tilslutning af mikrofonen.
- USB-C opladningsport: Til opladning af det interne batteri.
- 3.5 mm lydstik: Til kablet forbindelse.
Controls (Left Earcup):
- Tænd/sluk-knap: Press and hold to power on/off. Short press to cycle through connection modes (2.4G, Bluetooth, Wired).
- Volumenhjul: Scroll up/down to adjust audio volume.
- Mikrofon mute knap: Tryk for at slå mikrofonen til/fra.
- RGB knap: Press to cycle through RGB lighting effects or turn off the lighting.
Image: Headset shown with the detachable microphone removed.
5. Opsætning
5.1 Opladning af headsettet
- Connect the supplied USB-C charging cable to the USB-C port on the headset.
- Tilslut den anden ende af kablet til en USB-strømkilde (f.eks. en computers USB-port eller en USB-vægadapter).
- The LED indicator on the headset will show charging status (e.g., red for charging, off/blue for fully charged).
- Sørg for, at headsettet er fuldt opladet før første brug.
5.2 Montering af mikrofonen
- Locate the microphone port on the left earcup.
- Align the microphone's connector with the port and gently push it in until it clicks into place.
- Adjust the flexible microphone arm to your preferred position.
5.3 2.4GHz Wireless Connection (PC)
Image: Headset shown alongside its 2.4GHz USB wireless dongle.
- Insert the 2.4GHz USB wireless dongle into an available USB port on your PC.
- Press and hold the Power/Mode button on the headset to turn it on.
- Short press the Power/Mode button until the headset is in 2.4GHz wireless mode (indicated by a specific LED color or voice prompt).
- The headset and dongle should automatically pair. If not, refer to the troubleshooting section.
- Ensure the headset is selected as the audio output and input device in your PC's sound settings.
5.4 Bluetooth 5.3-forbindelse
- Press and hold the Power/Mode button on the headset to turn it on.
- Short press the Power/Mode button until the headset is in Bluetooth pairing mode (indicated by a flashing LED or voice prompt).
- Aktiver Bluetooth på din enhed (smartphone, tablet osv.) og søg efter tilgængelige enheder.
- Select "MARVO Pulz HG9086W" from the list of found devices to pair.
- Once paired, the LED indicator will show a steady light.
5.5 Kabelforbindelse
- Tilslut den ene ende af 3.5 mm lydkablet til 3.5 mm lydstikket på headsettet.
- Connect the other end of the 3.5mm audio cable to the audio output port of your device (PC, console controller, etc.).
- The headset will automatically switch to wired mode. No power is required for basic audio in wired mode, but the battery is needed for RGB lighting.
6. Betjeningsvejledning
6.1 Tænd/sluk
- Tænd: Press and hold the Power/Mode button for approximately 3 seconds.
- Sluk: Press and hold the Power/Mode button for approximately 3 seconds.
6.2 Skift af forbindelsestilstande
- While the headset is powered on, short press the Power/Mode button to cycle between 2.4GHz Wireless, Bluetooth, and Wired modes.
6.3 Lydstyrkekontrol
- Rotate the Volume Wheel up to increase volume.
- Rotate the Volume Wheel down to decrease volume.
6.4 Brug af mikrofon
- Slå lyden fra/til: Press the Microphone Mute button to toggle the microphone on or off. An indicator light may show the mute status.
6.5 RGB-baggrundsbelysningskontrol
- Press the RGB Button to cycle through various lighting effects or to turn the RGB backlight off.
7. Vedligeholdelse
7.1 Rengøring
- Use a soft, dry, lint-free cloth to clean the headset's surfaces.
- Brug ikke skrappe kemikalier, rengøringsopløsningsmidler eller stærke rengøringsmidler.
- Gently wipe the earpads to remove any dust or debris.
7.2 Opbevaring
- Opbevar headsettet et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- If storing for an extended period, ensure the battery is partially charged (around 50%) to preserve battery health.
7.3 Pleje af batterier
- Undgå at aflade batteriet helt ofte.
- Charge the headset regularly, even if not in frequent use, to prevent deep discharge.
8. Fejlfinding
Hvis du støder på problemer med dit headset, kan du se følgende almindelige problemer og løsninger:
- Ingen lyd:
- Ensure the headset is powered on and in the correct connection mode (2.4G, Bluetooth, or Wired).
- Kontroller lydstyrkeniveauet på både headsettet og din tilsluttede enhed.
- Verify that the headset is selected as the default audio output device in your system settings.
- For wired connection, ensure the 3.5mm cable is fully inserted.
- Mikrofonen virker ikke:
- Sørg for, at mikrofonen er sikkert fastgjort til headsettet.
- Check if the microphone is muted using the Mute button on the headset.
- Verify that the headset microphone is selected as the default input device in your system settings.
- Test mikrofonen med en anden applikation eller enhed.
- Kan ikke parre Bluetooth:
- Ensure the headset is in Bluetooth pairing mode (flashing LED).
- Sørg for, at Bluetooth er aktiveret på din enhed, og at den kan ses.
- Flyt headsettet tættere på din enhed.
- Prøv at genstarte både headsettet og din enhed.
- 2.4GHz Wireless Connection Issues:
- Sørg for, at USB-donglen er sat helt i en fungerende USB-port.
- Confirm the headset is in 2.4GHz wireless mode.
- Prøv at bruge en anden USB-port.
- Undgå interferens fra andre trådløse enheder.
- Kort batterilevetid:
- Sørg for, at headsettet er fuldt opladet før brug.
- High volume levels and continuous RGB lighting can reduce battery life.
- Battery performance may degrade over time with usage.
9. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | MARVO |
| Model | HG9086W (Item Model Number: HG9069W) |
| Forbindelse | Tri-mode (Wired, Bluetooth 5.3, 2.4GHz Wireless) |
| Højttaler størrelse | 40 mm dynamiske drivere |
| Frekvensresponsområde | 20Hz - 20KHz |
| Følsomhed | 118dB±3dB |
| Impedans | 32 ± 10% Ω |
| Mikrofon | High-sensitivity omnidirectional, detachable mic boom arm |
| Baggrundsbelysning | RGB lyseffekt |
| Kompatibilitet | PC (and other devices supporting Bluetooth/3.5mm audio) |
| Farve | Hvid |
| Formfaktor | Over Ear |
10. Garanti og support
10.1 Producentens garanti
Dette produkt er omfattet af en 6 måneders producentgaranti fra købsdatoen. Denne garanti dækker fabrikationsfejl og udførelse under normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller normal slitage.
Gem venligst dit købsbevis for garantikrav.
10.2 Kundesupport
For technical assistance, warranty claims, or further inquiries, please contact your retailer or the MARVO customer support team. Refer to the MARVO official webwebsted for kontaktoplysninger og yderligere ressourcer.
