ROBOTIME Magic Study Miniature Wooden DIY Book Nook Kit

Indledning

This instruction manual provides comprehensive guidance for the assembly and operation of your ROBOTIME Magic Study Miniature Wooden DIY Book Nook Kit. Please read all sections carefully to ensure a successful and enjoyable building experience. This kit allows you to construct a detailed miniature magical library scene, complete with LED lighting.

Sikkerhedsoplysninger

• Aldersanbefaling: This product is not suitable for children under 8 years old due to small parts. Recommended for ages 14 and up.
• Små dele: The kit contains numerous small components. Keep them out of reach of young children to prevent choking hazards.
• Skarpe kanter: Some wooden pieces may have sharp edges. Handle with care during assembly.
• Batterier: LED lights require 2 AAA batteries (not included). Ensure correct polarity when inserting batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product is not used for an extended period.

Hvad er der i æsken

Your ROBOTIME Magic Study kit includes the following components:

• Pre-cut wooden sheets for miniature house components
• Detailed instruction manual with illustrations
• LED lighting kit with wiring
• Various miniature accessories (e.g., books, potions, furniture)
• Small tools (e.g., tweezers, sandpaper)
• Spare parts for common components

Monteringsvejledning

The assembly process for the Magic Study kit typically takes approximately 5 hours. Patience and attention to detail are key for a rewarding experience.

1. Forberedelse: Unpack all components and verify against the parts list in your instruction booklet. Organize parts by number or type to streamline the process.
2. Følg manualen: Adhere strictly to the step-by-step instructions provided in the included manual. Each step is illustrated to guide you.
3. Mortise and Tenon Joints: This kit primarily uses mortise and tenon joints, eliminating the need for glue for most connections. Ensure parts fit snugly. If a joint is too tight, gently sand the tenon (protruding part) until it fits without excessive force.
4. Sarte dele: Some components are very small and delicate. Handle them carefully to avoid breakage.
5. Ledningsføring: When installing the LED lighting, follow the wiring diagrams precisely. Ensure all connections are secure before proceeding.
6. Tilpasning: While the manual provides a standard build, you can freely combine elements to create your unique design once the basic structure is complete.

LED-lys i drift

The ROBOTIME Magic Study kit features integrated LED lighting to enhance the miniature scene.

1. Batteri installation: Locate the battery compartment (usually at the base or back of the model). Insert 2 AAA batteries, ensuring the correct positive (+) and negative (-) orientation.
2. Tænd/sluk: The kit includes a switch to turn the LED lights on and off. Activate the switch to illuminate your miniature world.
3. Udskiftning af batteri: If the lights dim or stop working, replace the batteries with fresh ones.

Opretholdelse

• Støvning: To preserve the intricate details, regularly dust your miniature model with a soft, dry brush or a can of compressed air. Avoid using wet cloths.
• Opbevaring: Store the model in a cool, dry place away from direct sunlight and extreme temperature fluctuations to prevent warping or fading of materials.
• Håndtering: Always handle the model gently, supporting its base to avoid stressing delicate components.

Fejlfinding

Manglende eller beskadigede dele:

If you discover any missing or damaged components upon inspection or during assembly, please contact ROBOTIME customer support. We offer free spare parts to ensure your building experience is complete.

Vanskeligheder med montering:

Refer to the detailed instruction manual and its illustrations. Ensure you are using the correct parts for each step. If a wooden piece is difficult to fit, gently sand the connecting edges to achieve a smoother fit. Do not force parts together, as this may cause breakage.

LED-lys virker ikke:

Check that the 2 AAA batteries are correctly installed with the proper polarity. Ensure the batteries are fresh. Verify all wiring connections are secure and undamaged.

Specifikationer

Produktgalleri

Garanti og support

ROBOTIME is committed to providing high-quality products. While specific warranty details are not provided, we offer free spare parts for any missing or damaged components. For support or inquiries, please refer to the contact information provided in your product packaging or visit the official ROBOTIME webwebsted.