Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KX1071BD Vintage Hand Shower Kit. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.
The Kingston Brass KX1071BD is a single-function hand shower kit designed for a comfortable showering experience. It features durable brass construction, a 59-inch hose, a shower arm diverter for easy installation, and an adjustable wall bracket.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes.
- Hand Shower Head
- 59-inch Shower Hose
- Shower Arm Diverter
- Justerbart vægbeslag
- Installation Hardware (washers, seals, etc.)
Billede 1: Overview of the Kingston Brass KX1071BD Vintage Hand Shower Kit, showing the hand shower head, hose, and diverter valve.
Opsætning og installation
Before you begin, ensure the main water supply to your shower is turned off. Gather necessary tools: adjustable wrench, plumber's tape, and a soft cloth.
Step 1: Prepare the Shower Arm
- Remove your existing showerhead from the shower arm. Clean any old plumber's tape or debris from the shower arm threads.
- Apply new plumber's tape clockwise around the threads of the shower arm.
Step 2: Install the Shower Arm Diverter
- Thread the shower arm diverter onto the shower arm. Hand-tighten first, then use an adjustable wrench to tighten an additional 1/4 to 1/2 turn. Do not overtighten.
- Ensure the diverter lever is positioned for easy access.
Step 3: Connect the Shower Hose
- Connect one end of the 59-inch shower hose to the outlet on the bottom of the shower arm diverter. Ensure a washer is inside the hose connection. Hand-tighten.
- Connect the other end of the shower hose to the hand shower head. Ensure a washer is inside this connection as well. Hand-tighten.
Step 4: Install the Adjustable Wall Bracket
- Determine the desired height and location for the adjustable wall bracket.
- Mark the mounting holes. Drill pilot holes if necessary (check wall material).
- Secure the wall bracket to the wall using the provided screws and anchors.
- Place the hand shower head into the wall bracket.
Image 2: Technical drawing illustrating the dimensions and connection points of the hand shower kit components, including the diverter, hose, and hand shower head.
Trin 5: Test for lækager
- Tænd for hovedvandforsyningen.
- Check all connections for leaks. If leaks occur, tighten the connections slightly. Do not overtighten.
Betjeningsvejledning
The Kingston Brass KX1071BD hand shower kit is designed for simple operation.
- Omlederfunktion: The shower arm diverter allows you to switch water flow between your main showerhead (if applicable) and the hand shower. Move the diverter lever to direct water to your desired outlet.
- Brug af håndbruser: Remove the hand shower from its wall bracket. The single-function spray pattern provides a consistent, full spray.
- Adjustable Wall Bracket: The wall bracket allows you to adjust the angle of the hand shower for hands-free use, effectively converting it into a secondary showerhead.
Opretholdelse
Regular cleaning and maintenance will ensure the longevity and optimal performance of your hand shower kit.
- Rengøring af finishen: Rengør den polerede kromfinish med en blød,amp klud. Undgå slibende rengøringsmidler, stærke kemikalier eller skuresvampe, da disse kan beskadige overfladen.
- Rengøring af dyser: If mineral deposits build up on the hand shower nozzles, gently rub them with your finger or a soft brush to dislodge the deposits. For stubborn buildup, a solution of equal parts white vinegar and water can be applied to the nozzles for a short period, then rinsed thoroughly.
- Slangepleje: Periodically check the shower hose for kinks or damage. Ensure it hangs freely when not in use to prevent stress on the connections.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Vandlækage fra tilslutninger. | Loose connections, missing or damaged washers, insufficient plumber's tape. | Ensure connections are hand-tightened, then use a wrench for a final 1/4 to 1/2 turn. Check for and replace any damaged washers. Reapply plumber's tape if necessary. |
| Low water pressure from hand shower. | Mineral buildup in nozzles, partially closed diverter, low household water pressure. | Clean hand shower nozzles (see Maintenance). Ensure diverter is fully engaged for the hand shower. Check household water pressure. |
| Omlederen skifter ikke korrekt. | Debris in diverter mechanism, diverter not fully engaged. | Ensure the diverter lever is moved completely to the desired position. If issues persist, contact customer support. |
Specifikationer
- Model: KX1071BD
- Mærke: Kingston messing
- Slutte: Poleret krom
- Materiale: Messing
- Stil: Vintage
- Monteringstype: Wall Mount (for bracket)
- Hand Shower Head Size: 7-1/2'' (L) x 2-1/16'' (W) x 3-3/4'' (H)
- Slange længde: 59 tommer
- Flowhastighed: 1.8 GPM / 6.8 LPM ved 80 PSI
- Slangeforbindelse: 1 / 2-14 NPSM
- Varens vægt: Cirka 2.39 pund
- Særlige funktioner: Korrosionsbestandig
Garanti og support
For warranty information or technical support, please contact Kingston Brass customer service. Refer to your product packaging or the official Kingston Brass webwebstedet for de seneste kontaktoplysninger og garantivilkår.
Kingston Brass Officiel Webwebsted: www.kingstonbrass.com
