SIMREX Z16 RC Helikopter Instruktionsmanual

1. Introduktion

This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your SIMREX Z16 RC Helicopter. Please read this manual thoroughly before operating the helicopter to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Sikkerhedsoplysninger

• Aldersanbefaling: This product is recommended for users aged 14 to 17 years. Adult supervision is advised for younger users within this range.
• Driftsmiljø: For optimal safety and control, operate the helicopter indoors or in an open, windless outdoor environment. Avoid strong winds, rain, or snow.
• Forhindringer: Ensure the flight area is clear of people, pets, and obstacles such as furniture, lights, and power lines.
• Batterisikkerhed: Do not overcharge batteries. Use only the provided charging cable. Do not expose batteries to extreme temperatures or puncture them.
• Propelsikkerhed: Hold hænder, ansigt og løstsiddende tøj væk fra roterende propeller.
• Anti-Jamming and Low-Voltage Beskyttelse: The helicopter is equipped with anti-jamming features to prevent interference and low-voltage protection to ensure safe landing when the battery is low.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• SIMREX Z16 RC Helicopter x 1
• 2.4GHz Remote Control x 1
• Rechargeable Modular Batteries x 2 (for helicopter)
• USB-opladerkabel x 1
• Spare Main Blades x 2
• Spare Tail Blade x 1
• Skruetrækker x 1
• Brugsanvisning x 1

Image: SIMREX Z16 RC Helicopter and its accessories.

4. Komponentidentifikation

4.1 Helicopter Components

• Hovedrotorblade
• Halerotor
• Landing Skids
• Batterirum
• Strømafbryder

Image: SIMREX Z16 RC Helicopter overview.

4.2 Fjernbetjeningens komponenter

• Accelerator (Left Stick): Styrer gashåndtaget (op/ned) og drejefunktionen (venstre/højre rotation).
• Turn/Forward (Right Stick): Styrer bevægelse fremad/bagud og venstre/højre bevægelse.
• One Key Take-off/Landing Button: Starter automatisk start eller landing.
• High and Low Speed Button: Toggles between speed modes.
• Lighting Control Button: Controls helicopter lights.
• Left Trim Button: Justerer venstre/højre drift.
• Right Spinner Button: Justerer fremad/bagud-drift.
• Afbryderen: Tænder/slukker fjernbetjeningen.

Image: Remote Control Diagram with labeled functions.

5. Opsætning

5.1 Opladning af helikopterbatteriet

1. Sørg for, at helikopterens tænd/sluk-knap er i OFF-positionen.
2. Tilslut USB-opladerkablet til helikopterens opladningsport.
3. Plug the USB end of the cable into a USB power source (e.g., computer, USB wall adapter).
4. Indikatorlampen på USB-kablet viser opladningsstatus (se kablets instruktioner for specifik opladningsfunktion).
5. Charging typically takes approximately 60-90 minutes for a full charge, providing up to 20 minutes of flight time per battery.
6. Frakobl kablet, når opladningen er fuldført.

Image: Helicopter batteries and flight duration.

5.2 Installation af batterier i fjernbetjeningen

1. Open the battery compartment on the back of the remote control using a screwdriver.
2. Sæt 3 AAA-batterier (medfølger ikke) i batterirummet, og sørg for at polerne vender korrekt (+/-).
3. Luk batterirummet og fastgør det med skruen.

5.3 Parring af helikopter og fjernbetjening

1. Placer helikopteren på en flad, jævn overflade.
2. Turn on the helicopter's power switch. The helicopter's lights will flash.
3. Tænd for fjernbetjeningens strømafbryder.
4. Move the left joystick (accelerator) fully up, then fully down. The remote control will beep, and the helicopter's lights will become solid, indicating successful pairing.

5.4 Kalibrering

If the helicopter drifts or fails to take off normally after pairing, calibration is required:

1. Ensure the helicopter and remote are paired.
2. Placer helikopteren på en flad, jævn overflade.
3. Simultaneously push both joysticks (accelerator and turn/forward) to the bottom-left corner for a few seconds.
4. The helicopter's indicator lights will flash rapidly and then become solid, indicating successful calibration.

Image: Calibration and troubleshooting steps.

6. Betjeningsvejledning

6.1 Grundlæggende flyvekontrol

• Take-Off: Press the One Key Take-Off/Landing button, or gently push the left joystick (accelerator) upwards.
• Landing: Press the One Key Take-Off/Landing button, or gently pull the left joystick (accelerator) downwards.
• Stig op/ned: Push the left joystick (accelerator) up to ascend, pull down to descend.
• Drej til venstre/højre (drej): Push the left joystick (accelerator) left or right to rotate the helicopter.
• Frem/tilbage: Push the right joystick (turn/forward) up to move forward, pull down to move backward.
• Strafing (Left/Right): Push the right joystick (turn/forward) left or right to move sideways.

Image: Demonstrating remote control operation.

Image: Forward and backward control.

Image: One-key take-off feature.

6.2 Særlige funktioner

• Højdehold: The helicopter will automatically maintain its current altitude after take-off, making it easier to control. This feature is enabled by advanced air pressure technology.


Image: Altitude Hold feature.

• Hastighedstilstande: Press the High and Low Speed button on the remote control to switch between two flight speeds. The slower speed is ideal for beginners, while the faster speed offers more dynamic flight for experienced users.
• Trim kontrol: If the helicopter drifts without input, use the Left Trim or Right Spinner buttons on the remote control to fine-tune its stability.

Image: Easy control features for beginners.

7. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre helikopteren og fjernbetjeningen. Undgå at bruge vand eller kemiske rengøringsmidler.
• Udskiftning af knive: If main or tail rotor blades become damaged, replace them with the provided spare blades. Use the included screwdriver for this task. Ensure blades are installed correctly.
• Batteripleje: Store batteries in a cool, dry place. Do not leave batteries fully discharged for extended periods. Remove batteries from the remote control if not in use for a long time.
• Opbevaring: Store the helicopter and remote control in a safe place, away from direct sunlight and extreme temperatures.

8. Fejlfinding

• Helicopter Fails to Take Off or Flies Unstably:
  • Sørg for, at helikopterens batteri er fuldt opladet.
  • Verify that the remote control batteries are fresh and correctly installed.
  • Perform the pairing process again (Section 5.3).
  • Calibrate the helicopter on a flat surface (Section 5.4).
  • Check for any damaged or bent propellers and replace if necessary.
• Helicopter Drifts During Flight:
  • Use the trim buttons on the remote control to adjust for drift.
  • Ensure the helicopter was calibrated on a flat surface before flight.
  • Undgå at flyve i blæsende forhold.
• Fjernbetjeningen reagerer ikke:
  • Check remote control battery levels.
  • Ensure the remote control and helicopter are properly paired.
  • Confirm the helicopter's power is on.
• Kort flyvetid:
  • Ensure the helicopter battery is fully charged before each flight.
  • Flight time can vary based on aggressive flying and environmental factors.

9. Specifikationer

Image: Portable size of the helicopter.

10. Garanti og support

For any questions, technical support, or warranty inquiries regarding your SIMREX Z16 RC Helicopter, please contact the manufacturer or your retailer. Refer to the product packaging or the official SIMREX webwebsted for kontaktoplysninger.