1. Vigtige sikkerhedsinstruktioner
Læs og forstå alle sikkerhedsinstruktioner, før du bruger dette apparat. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.
- Always disconnect the heater from the power supply before performing any maintenance, cleaning, or handling inside the aquarium.
- Ensure the heater is fully submerged in water before connecting it to the power supply. Never operate the heater dry.
- The heater is designed for indoor use only, specifically for aquariums. Do not use it for any other purpose.
- Inspect the heater and its power cord regularly for any signs of damage. Do not use if damaged.
- Opbevares utilgængeligt for børn.
- The heater features an additional safety shut-off to prevent overheating.
- The borosilicate glass tube is heat-resistant and shock-resistant, but handle with care to avoid breakage.
2. Produktet er slutview
The Tetra HT 25 Electronic Aquarium Heater is designed to maintain a stable and optimal water temperature for tropical fish in aquariums ranging from 10 to 25 liters. Its fully electronic design ensures high precision and reliability.
Image 1: Tetra HT 25 Electronic Heater. This image displays the packaging for the Tetra HT 25 Electronic Heater. The packaging highlights the product name 'HT 25 Electronic Heater' and the brand 'Tetra'. It also shows the heater unit itself, which is black with green accents, and indicates features such as suitability for 'up to 25L' aquariums, 'plug and play' operation, and 'safety tested' certification. The heater is designed for 'fish well-being' by maintaining 'optimal temperature'.
Nøglefunktioner:
- Electronic Precision: Fully electronic with an integrated microprocessor for accurate temperature control.
- Justerbar temperatur: Temperature adjustment knob allows setting between 20°C and 32°C in 1°C increments.
- Status-LED: 3-stage status LED for easy monitoring of the heating phase.
- Holdbar konstruktion: Extra thick, heat-resistant, and shock-resistant borosilicate glass tube.
- Sikkerhedsfunktioner: Waterproof cap, fully immersible design, and additional safety shut-off.
- Nem installation: Secure attachment with two suction cups and a 1.6 m long power cord.
- Aquarium Size: Suitable for aquariums from 10 to 25 liters.
3. Opsætning og installation
Follow these steps to correctly install your Tetra HT 25 Electronic Aquarium Heater:
- Pakker ud: Carefully remove the heater from its packaging and inspect it for any damage.
- Placering: Choose a location in your aquarium where water circulation is good. This ensures even heat distribution. Avoid placing it directly in the substrate.
- Sikker vedhæftning: Use the two provided suction cups to securely attach the heater to the inside wall of your aquarium. Ensure it is fully submerged and positioned vertically or at a slight angle.
- Temperaturindstilling: Before plugging in, use the temperature adjustment knob at the top of the heater to set your desired water temperature (between 20°C and 32°C). For most tropical fish, a temperature between 24°C and 26°C is ideal.
- Strømtilslutning: Once the heater is fully submerged and the temperature is set, connect the power cord to a suitable electrical outlet.
- Initial Monitoring: Monitor the aquarium temperature with a separate thermometer for the first 24 hours to ensure the heater is maintaining the desired temperature accurately. Adjust if necessary.
Vigtig: Ensure the heater is always fully submerged when powered on. Operating it dry will cause damage and void the warranty.
4. Betjening
The Tetra HT 25 heater operates automatically once plugged in and submerged. The integrated microprocessor continuously monitors and adjusts the heating element to maintain the set temperature.
- Temperaturjustering: To change the temperature, unplug the heater, adjust the knob to the new desired setting, and then plug it back in. Allow time for the aquarium water to stabilize at the new temperature.
- Status-LED: 3-ernetage status LED provides visual feedback on the heater's operation:
- LED tændt: The heater is actively heating the water.
- LED slukket: The water has reached the set temperature, and the heater is in standby mode.
- Blinkende LED: Indicates a potential issue or safety shut-off activation. Refer to the Troubleshooting section.
- Strømafbrydelse: I tilfælde af en magt outage, the heater will resume normal operation once power is restored, maintaining the last set temperature.
5. Vedligeholdelse og rengøring
Regelmæssig vedligeholdelse sikrer varmelegemets levetid og effektive drift.
- Afbryd strømmen: Always unplug the heater from the power outlet before removing it from the aquarium or performing any cleaning.
- Køl ned: Allow the heater to cool down for at least 15-20 minutes after unplugging before removing it from the water. This prevents thermal shock to the glass.
- Rensning: Gently wipe the heater's glass tube with a soft cloth or sponge to remove algae or mineral deposits. Do not use abrasive cleaners or harsh chemicals.
- Sugekopper: Periodically check the suction cups for wear and tear. Replace them if they lose their grip to ensure the heater remains securely attached.
- Opbevaring: If storing the heater, ensure it is clean, dry, and stored in a safe place away from extreme temperatures.
6. Fejlfinding
If you encounter issues with your Tetra HT 25 heater, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Heater not turning on (LED off) | No power; heater already at set temperature. | Check power connection. Verify aquarium temperature with a separate thermometer. If temperature is below set point, check power outlet. |
| Aquarium water not heating up | Heater too small for aquarium volume; incorrect temperature setting; poor water circulation. | Ensure heater matches aquarium size (10-25L). Increase temperature setting. Improve water circulation (e.g., with a filter). |
| Heater LED flashing | Safety shut-off activated (e.g., heater operated dry or overheating). | Immediately unplug the heater. Allow it to cool down completely. Ensure it is fully submerged before plugging it back in. If flashing persists, the unit may be faulty. |
| Temperature fluctuates significantly | Poor water circulation; external temperature changes. | Ensure good water flow around the heater. Minimize drafts or sudden temperature changes in the room. |
If the problem persists after trying these solutions, please contact Tetra customer support.
7. Specifikationer
- Model: Tetra HT 25
- Magt: 25 W
- Akvariumvolumen: 10 - 25 liter
- Temperaturområde: 20°C - 32°C (adjustable in 1°C increments)
- Dimensioner: Approximately 5 x 9 x 28 cm (Product Dimensions: 5 x 9 x 28 cm; 210 g)
- Kabellængde: 1.6 m
- Varemodelnummer: 307049
- Materiale: Borosilicate glass tube, plastic cap
- Specifikke anvendelser: Indoor aquarium heating
8. Garanti og support
The Tetra HT 25 Electronic Aquarium Heater comes with a 2 års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl under normale brugsforhold.
Garantien dækker ikke skader som følge af:
- Forkert installation eller brug.
- Operating the heater dry (not fully submerged).
- Accidental breakage or misuse.
- Uautoriserede reparationer eller ændringer.
For warranty claims, technical support, or further assistance, please contact Tetra customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and the product model number (HT 25, Model 307049) available.
