Indledning
This manual provides comprehensive instructions for the installation, operation, and maintenance of your HOROW B0400 Elongated Non-Electric Bidet Toilet Seat. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Sikkerhedsoplysninger
- Sørg for, at alle forbindelser er sikre for at forhindre lækager.
- Do not use abrasive cleaners on the bidet seat.
- Dette produkt er kun designet til husholdningsbrug.
- Supervise children and individuals with limited physical capabilities during use.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- HOROW B0400 Elongated Bidet Toilet Seat
- Adapter Water Inlet Hose
- Dækpladen
- Fixation Part
- Installationsskabelon
- Brugervejledning (dette dokument)
Produktegenskaber
- Ikke-elektrisk drift: No electrical outlet required, manual control for spray pressure.
- Adjustable Dual Nozzles: Features ergonomic water jet design with rear and feminine washing modes.
- Soft-Close Seat Lid: Slow-closing hinges prevent slamming, ensuring quiet operation and extended product life.
- Hurtigudløserfunktion: Allows for easy removal of the seat for cleaning.
- Elongated Design: Measures 20 inches deep by 14.7 inches wide, providing a comfortable seating area.
Figur 1: Adjustable Dual Bidet Nozzles. This image illustrates the two distinct spray patterns for feminine cleaning (soft stream) and rear spray (adjustable pressure).
Figur 2: Premium Seat Design. This image shows a comparison between the HOROW bidet seat and another brand, emphasizing the wider and more ergonomic contact area of the HOROW seat for enhanced comfort.
Dimensioner
The HOROW B0400 bidet toilet seat is designed for elongated toilets. Refer to the diagram below for detailed measurements.
Figur 3: Product Dimensions. This diagram provides a top-down and side view of the bidet seat with key measurements: 20"L x 14.7"W x 3.4"H.
Installationsvejledning
Follow these steps for easy DIY installation. Ensure the water supply is turned off before starting.
- Fjern eksisterende toiletsæde: Brug en skruetrækker til at fjerne boltene, der fastgør dit nuværende toiletsæde.
- Install Fixing Plate: Place the provided fixation part (sliding fixing plate) over the toilet bowl holes.
- Fastgør bidetsæde: Align the HOROW B0400 bidet seat with the fixing plate and slide it into place until it clicks.
- Tilslut vandforsyning: Turn off the main water supply to the toilet. Disconnect the existing water supply hose from the toilet tank. Install the T-connector (supplied) to the toilet tank's water inlet. Connect the bidet's water inlet hose to the T-connector. Reconnect the main water supply hose to the T-connector.
- Tjek for lækager: Slowly turn on the water supply and check all connections for any leaks.
Figur 4: Installation Process. This image illustrates the four main steps for installing the bidet seat, from removing the old seat to connecting the water supply.
Operation
The HOROW B0400 bidet seat features a side button control for easy operation.
- Justering af vandtryk: Rotate the side button to manually adjust the water spray pressure to your preference.
- Washing Modes: The bidet offers both rear and feminine washing modes. Select the desired mode by rotating the control knob.
Figur 5: Water Pressure Adjustment. This image highlights the side control knob used to adjust water flow and select washing modes.
Opretholdelse
- Rengøring af sædet: Use a soft cloth and mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads, as these can damage the surface.
- Rengøring af dyse: The nozzles are self-cleaning. For deeper cleaning, gently pull out the nozzles and wipe them with a soft cloth.
- Quick Release for Cleaning: Press the quick-release button to easily detach the seat from the toilet for thorough cleaning of both the seat and the toilet bowl area.
Figur 6: Quick Release Button. This image demonstrates how to use the quick-release button to detach the bidet seat for cleaning.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No water spray or weak spray | Water supply valve is closed; Nozzle is clogged; Water pressure too low. | Ensure the water supply valve is fully open. Clean the nozzle. Adjust the water pressure using the side control. |
| Vandlækage fra tilslutninger | Loose connections; Damaged washer. | Tighten all connections securely. Check washers for damage and replace if necessary. |
| Seat does not close softly | Hinges are dirty or damaged. | Clean the soft-close hinges. If damaged, contact customer support for assistance. |
| Difficulty installing T-connector | Incompatible pipe sizes or limited access. | Ensure T-connector fits standard American water supply valves (3/8 or 1/2 inch) or tank inlet (7/8 inch). If space is tight, professional installation may be required. |
Specifikationer
- Model: B0400
- Mærke: HOROW
- Type: Non-Electric Bidet Toilet Seat
- Form: Aflang (oval)
- Materiale: Plast
- Farve: Hvid
- Produktdimensioner: 20 cm L x 14.7 cm B x 3.4 cm H
- Varens vægt: 4.8 pund
- Compatible Toilet Type: Designed for elongated toilets, including T0338W.
Garanti og support
HOROW values customer satisfaction and stands by the quality of its products.
- Garanti: Dette produkt leveres med en 1-års begrænset garanti.
- Eftersalgsservice: HOROW provides lifetime after-sales service.
- Kundesupport: For any questions, issues, or warranty claims, please contact HOROW customer service. Responses are typically provided within 12 hours.
