Indledning
The DYNASTY PROAUDIO TMP-1 is a professional vacuum tube microphone preamplifier designed to enhance audio signals with warmth and clarity. It features a 12AX7 vacuum tube, 48V phantom power, and a built-in limiter, making it suitable for a variety of recording and live sound applications with both condenser and dynamic microphones, as well as instruments.
Sikkerhedsinstruktioner
- Læs alle instruktioner omhyggeligt før brug.
- Udsæt ikke enheden for regn eller fugt.
- Åbn ikke c'enasing. Overlad al service til kvalificeret personale.
- Sørg for korrekt ventilation for at forhindre overophedning.
- Use only the specified power adapter (AC 9V).
- Afbryd strømmen før rengøring eller når den ikke er i brug i længere perioder.
Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- TMP-1 Professionel Vakuumrørsmikrofonforstærkeramplivligere
- Power Adapter (AC 9V)
- Brugervejledning (dette dokument)
Produkt overview
The TMP-1 features a robust design with intuitive controls for optimal audio processing.
Dette billede viser en vinklet view of the DYNASTY PROAUDIO TMP-1 Professional Vacuum Tube Microphone Preamplifier. The front panel with controls and indicators is visible, along with the sturdy black casing.
Dette billede giver et nærbillede view of the TMP-1's front panel. It clearly displays the "OUTPUT LEVEL" LED indicators, "Gain Input" and "Drive" rotary knobs, and push-buttons for "Phantom Power", "Limit", "Phase", and "Gain".
This image shows the rear panel of the TMP-1, highlighting the input and output connections. It includes XLR and 1/4-inch (6.35mm) input jacks, XLR and 1/4-inch (6.35mm) output jacks, and the AC 9V power input.
Kontrol og indikatorer på frontpanelet
- OUTPUT LEVEL LEDs: Indicators for signal level (-10, -5, 0, +3, +6dB Peak).
- Gain Input Knob: Adjusts the input gain from minimum to maximum.
- Drive Knob: Controls the amount of tube saturation/drive.
- Phantom Power Button (ON/OFF): Activates/deactivates 48V phantom power for condenser microphones.
- Limit Button (ON/OFF): Engages/disengages the built-in limiter to prevent clipping.
- Phase Button (Reverse/Normal): Reverses the phase of the input signal.
- Gain Button (+20dB/Normal): Provides an additional +20dB gain boost.
Bagpaneltilslutninger
- INPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) inputs for microphones or instruments.
- OUTPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) outputs for connecting to mixers, audio interfaces, or other audio devices.
- AC 9V: Strømindgang til den medfølgende AC-adapter.
Opsætning
- Strømtilslutning: Connect the supplied AC 9V power adapter to the "AC 9V" input on the rear panel of the TMP-1, then plug the adapter into a suitable power outlet.
- Indgangsforbindelse:
- For microphones: Connect your microphone to either the XLR or 1/4-inch INPUT jack on the rear panel.
- For instruments: Connect your instrument (e.g., guitar, bass) to the 1/4-inch INPUT jack.
- Udgangsforbindelse: Connect the TMP-1's XLR or 1/4-inch OUTPUT to your mixer, audio interface, or recording device's input.
- Indledende indstillinger: Before powering on, ensure the "Gain Input" and "Drive" knobs are set to their minimum positions. Ensure "Phantom Power" is OFF unless using a condenser microphone.
This image shows the TMP-1 preamplifier with various audio cables connected to its input and output jacks, demonstrating a typical setup.
Betjeningsvejledning
Tænder
Once all connections are made, power on the TMP-1. The "Power" LED on the front panel will illuminate.
Bruger Phantom Power
If you are using a condenser microphone, press the Fantomkraft button to activate 48V phantom power. The corresponding LED will light up. Warning: Do not activate phantom power when using dynamic microphones or ribbon microphones, as this can cause damage.
Justering af inputforstærkning
Drej langsomt Gain Input knob clockwise to increase the input signal level. Monitor the "OUTPUT LEVEL" LEDs. Aim for the signal to primarily light up the -5 and 0 dB LEDs during normal operation, with occasional peaks into the +3 dB LED. Avoid consistently hitting the +6dB Peak LED, which indicates clipping.
Applying Drive (Tube Saturation)
De Køre knob controls the amount of tube saturation. Turn it clockwise to add warmth and harmonic richness to your signal. Experiment with this control to find the desired sonic character.
Using the Limiter
Tryk på Begrænse button to engage the built-in limiter. This helps prevent signal peaks from exceeding a certain level, protecting your recording equipment from clipping and providing a more consistent output level.
Fasevending
De Fase button allows you to reverse the phase of the input signal. This can be useful in multi-microphone setups to correct phase cancellation issues or for creative effects.
Additional Gain Boost
If your input signal is very low, you can press the Gevinst button to apply an additional +20dB gain boost. Use this judiciously to avoid introducing unwanted noise or distortion.
This image shows a close-up of a glowing vacuum tube, representing the 12AX7 tube inside the TMP-1 that provides its characteristic warmth.
This image features a professional condenser microphone in a studio environment, illustrating the type of microphone that benefits from the TMP-1's phantom power and preamplifikation.
This image shows hands playing a bass guitar, demonstrating the TMP-1's versatility in handling instrument-level signals.
Opretholdelse
- Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Udskiftning af rør: The 12AX7 vacuum tube has a finite lifespan. If you notice a degradation in sound quality or increased noise over time, the tube may need replacement. This should be performed by qualified service personnel.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Power adapter not connected; faulty outlet; faulty adapter. | Check power connections; try a different outlet; test adapter if possible. |
| Ingen lydudgang | Incorrect cable connections; gain too low; phantom power not engaged for condenser mic; faulty cable. | Verify all input/output cables are securely connected; increase Gain Input; activate Phantom Power for condenser mics; try different cables. |
| Forvrænget lyd | Gain too high (clipping); faulty tube; incorrect impedance. | Reduce Gain Input; check OUTPUT LEVEL LEDs for clipping; if distortion persists, consult service for tube inspection; ensure proper impedance matching. |
| Brummen eller støj | Jordsløjfe; defekte kabler; interferens fra anden elektronik. | Use balanced cables; try isolating power; move unit away from other electronic devices; check for faulty cables. |
Specifikationer
- Model: TMP-1
- Rørtype: 12AX7 Vacuum Tube
- Fantomkraft: +48V (omskiftelig)
- Indgange: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
- Udgange: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
- Strømforsyning: AC 9V (included adapter)
- Produktdimensioner: 9.5 x 6 x 3.5 tommer (24.13 x 15.24 x 8.89 cm)
- Varens vægt: 2.6 pund (1.18 kg)
- Fabrikant: Dynasty Proaudio
- Dato først tilgængelig: 19. august 2024
Garanti og support
For warranty information and technical support, please contact DYNASTY PROAUDIO directly.
Visit the official DYNASTY PROAUDIO Store on Amazon for more information: DYNASTY PROAUDIO Store
Gem venligst dit købsbevis for garantikrav.
