PGST PB-68 Dør- og vinduessensor Brugermanual

Indledning

The PGST PB-68 Door and Window Sensor is a crucial component of your PGST Home Security System, designed to detect unauthorized entry through doors and windows. This sensor operates by detecting the separation of its two main parts, triggering an alarm signal to your connected PGST alarm host and sending notifications to your smartphone. It provides real-time monitoring and enhances the security of your home or property.

Vigtig: This sensor requires a PGST alarm host to function correctly and is compatible only with the PGST home security system.

Pakkens indhold

1 x PGST PB-68 Door and Window Sensor (main unit and magnetic contact)
1 x Lithium Ion Battery (pre-installed)
1 x Double-sided Adhesive Tape for installation

Opsætning

Installationskrav

A functional PGST alarm host (required for operation).
A clean, dry surface for mounting the sensor.

Installationstrin

Forbered overfladen: Clean the desired mounting area on your door or window frame and the corresponding moving part (door/window) to ensure proper adhesion.
Fastgør klæbebånd: Apply the provided double-sided adhesive tape to the back of both the main sensor unit and the magnetic contact.
Monter hovedenheden: Mount the larger sensor unit onto the fixed frame of the door or window.
Mount the Magnetic Contact: Mount the smaller magnetic contact onto the moving part of the door or window (the door itself or the window sash).
Juster komponenter: Ensure that the main sensor unit and the magnetic contact are aligned horizontally and are less than 10 mm (approximately 0.4 inches) apart when the door or window is closed. Proper alignment is critical for correct operation.
Test installation: Open and close the door or window several times to verify that the sensor triggers and resets correctly. Confirm that your PGST alarm host registers the sensor's status changes.

PGST PB-68 Door and Window Sensor components, showing the main sensor unit and the magnetic contact. — This image displays the two main components of the PGST PB-68 Door and Window Sensor: the larger sensor unit and the smaller magnetic contact. These two parts are designed to be mounted adjacent to each other on a door or window frame, with a small gap between them when the door/window is closed.

Betjeningsvejledning

Funktionalitet

Opdagelse: When the door or window to which the sensor is attached is opened, the main sensor unit and the magnetic contact separate. This separation triggers the sensor.
Alarmudløser: Upon being triggered, the sensor sends a signal to your connected PGST alarm host. The alarm host will then activate its siren (if armed) and initiate any programmed actions, such as sending notifications.
Overvågning i realtid: Through the PGST application on your smartphone, you can monitor the real-time status of your doors and windows (open or closed) 24 hours a day, 7 days a week. You will receive alarm signals on your mobile phone within seconds of a trigger event.

Pairing with PGST Alarm System

Refer to your PGST alarm host's user manual for specific instructions on how to add new sensors to the system. Generally, this involves putting the alarm host into pairing mode and then triggering the sensor (e.g., by separating its two parts) to register it with the system. The process is typically managed through the PGST mobile application.

Opretholdelse

Udskiftning af batteri

The PGST PB-68 sensor comes with a pre-installed Lithium Ion battery. When the battery level is low, your PGST alarm host or mobile application will typically notify you. To replace the battery:

Carefully detach the main sensor unit from its mounting surface.
Open the battery compartment (refer to the sensor's casing for specific opening mechanism, usually a small latch or screw).
Remove the old Lithium Ion battery.
Insert a new 3.7V Lithium Ion battery, ensuring correct polarity.
Luk batterirummet, og monter sensoren igen.
Test the sensor to ensure it is functioning correctly with the alarm system.

Rensning

Wipe the sensor's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

Fejlfinding

Problem	Mulig årsag	Løsning
Sensor not triggering alarm.	Forkert justering af sensor og magnet. Sensor not paired with alarm host. Lavt eller dødt batteri. Alarm system not armed.	Ensure the gap between the sensor and magnet is less than 10 mm when closed. Refer to your alarm host manual to pair the sensor. Udskift batteriet. Arm your PGST alarm system.
No notifications on smartphone.	Sensor not triggering. Smartphone app not configured for notifications. Internet connection issues with alarm host or smartphone.	Troubleshoot sensor triggering (see above). Check app settings for notification permissions and preferences. Verify internet connectivity for both your alarm host and smartphone.
Sensor frequently triggers falsely.	Sensor and magnet too far apart or loose. Vibrations or movement causing slight separation.	Re-align and re-secure the sensor and magnet, ensuring a firm attachment. Consider a more stable mounting location if possible.

Specifikationer

Modelnummer	PB-68
Sensor Technology	Kontakt sensor
Strømkilde	Batteridrevet
Batteritype	1 x Lithium Ion (included)
Voltage	3.7 volt (DC)
Materiale	Plast
Installationsmetode	Selvklæbende
Monteringstype	Fremspringende
Produktdimensioner	2.95 x 1.96 x 2.16 tommer
Varens vægt	1.44 ounce
Kompatible enheder	PGST Home Security System, Smartphone (via app)

Garanti og support

For warranty information, technical support, or further assistance with your PGST PB-68 Door and Window Sensor, please refer to the documentation provided with your PGST alarm host or visit the official PGST website. PGST is committed to customer experience and continuously improving its products and services.

Du kan også finde mere information og kontakte support via PGST Store on Amazon.

	PGST WIFI Dørvindue Sensor Brugermanual Brugermanual til PGST WIFI dør- og vinduessensoren, der beskriver dens funktioner, betjening, installation og specifikationer. Indeholder oplysninger om FCC-overholdelse.
	PGST Smart Alarmsystem - Brugsanvisning og support Kom godt i gang med dit PGST Smart Alarmsystem (PG-103, PG107). Denne vejledning indeholder betjeningsvejledning, kontaktoplysninger til support og information om flersprogede ressourcer til hjemmesikkerhed.
	Brugermanual til GSM- og WiFi-alarmsystem Brugermanual til GSM- og WiFi-alarmsystemet, der beskriver funktioner, opsætning, betjening og integration med mobilapps til PG103-alarmværten.
	PGST PG-500 GSM 2G/4G/WiFi alarmsystem brugermanual Detaljeret brugermanual til PGST PG-500 GSM 2G/4G/WiFi alarmsystemet. Dækker installation, opsætning og betjening af mobilapp, systemindstillinger, daglig brug, vedligeholdelse, tekniske specifikationer og fejlfinding.
	PGST PG-109 Alarm Host Brugervejledning Omfattende brugermanual til PGST PG-109 Alarm Host-sikkerhedssystemet, der dækker installation, betjening, funktioner som fjernbetjening, trådløse detektorer, app-integration og tekniske specifikationer.
	Brugermanual til PG-S01 røgalarm \| PGST Omfattende brugermanual til PGST PG-S01 røgalarmen, der dækker installation, betjening, fejlfinding og tekniske specifikationer. Sørg for hjemmets sikkerhed med denne pålidelige fotoelektriske røgalarm.

PGST PB-68