FLARING FM155 3-in-1 MIG Welder User Manual

1. Introduktion

This user manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your FLARING FM155 155Amp 3-in-1 MIG Welder. This versatile machine supports Gasless MIG, Stick, and Lift TIG welding processes, making it suitable for a wide range of applications from home use to professional projects. Please read this manual thoroughly before operating the welder to ensure proper usage and to prevent injury or damage.

2. Sikkerhedsoplysninger

Welding can be dangerous. Always follow safety precautions to prevent serious injury or death. This section outlines general safety guidelines. Refer to local regulations and industry standards for comprehensive safety practices.

• Elektrisk stød kan dræbe: Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the work area is dry.
• Dampe og gasser kan være farlige: Hold hovedet væk fra dampene. Brug ventilation eller udsugning til at fjerne dampe fra indåndingszonen.
• Welding Can Cause Fire or Explosion: Keep flammables away from the welding area. Have a fire extinguisher readily available.
• Lysbuestråler kan brænde øjne og hud: Wear a welding helmet with a proper shade filter. Wear protective clothing (long sleeves, pants, leather gloves).
• Varme dele kan forårsage alvorlige forbrændinger: Allow welded materials to cool before handling. Use insulated gloves and tongs.
• Afbryd altid strømmen: Before servicing or moving the unit, ensure the power supply is disconnected.
• Korrekt jording: Ensure the welder is properly grounded according to electrical codes.

3. Pakkens indhold

Upon opening your FLARING FM155 welder package, please verify that all the following items are included:

• 1 x FLARING 155Amp MIG Welder (FM155)
• 1 x MIG Welding Torch (3M cable)
• 1 x 0.8 Flux Cored Wire (0.5kg)
• 1 x Electrode Holder with Cable (2M)
• 1 x Brush & Hammer
• 1 x formalet kloramp with Cable (2M)
• 4 x Contact Tips
• 2 x Gas Nozzles (Gaiser)
• 1 x Brugermanual (dette dokument)

4. Produktet er slutview

The FLARING FM155 is a compact and powerful 3-in-1 welding machine designed for versatility and ease of use. It features a large LED digital display for clear parameter adjustments and supports multiple welding processes.

4.1 Nøglefunktioner:

• 3-i-1 funktionalitet: Capable of Gasless MIG, Stick (MMA), and Lift TIG welding.
• Høj output: Maximum 155A output, suitable for welding mild steel up to 4mm (3/20").
• Large LED Digital Display: Provides clear readings for welding mode, current, and voltage, enhancing operational clarity.
• Bærbart design: Weighs only 12 pounds with a convenient handle for easy transport.
• IGBT-inverterteknologi: Ensures stable arc and efficient performance.

5. Opsætning

5.1 Strømtilslutning

The FLARING FM155 operates on 110V AC power. Ensure your power source meets the voltage requirements and is properly grounded. Use a dedicated circuit if possible to avoid overloading.

5.2 Wire Installation (Gasless MIG)

For Gasless MIG welding, install the flux-cored wire spool. The machine supports 0.030" (0.8mm), 0.035" (0.9mm), and 0.040" (1.0mm) flux core wire sizes. The included wire is 0.8mm (0.5kg).

1. Åbn trådfremføringsrummet.
2. Place the wire spool onto the spool retainer. Ensure it rotates freely.
3. Feed the wire through the wire guide and into the drive roller mechanism.
4. Secure the wire with the wire pressing wheel, ensuring proper tension.
5. Luk rummet.
6. Connect the MIG welding torch to the appropriate port on the front panel.

5.3 Elektrodeholder og jordforbindelseamp Connection (Stick/Lift TIG)

For Stick welding or Lift TIG (requires an additional TIG torch), connect the electrode holder and ground clamp:

1. Tilslut jorden clamp cable to the negative (-) terminal on the welder.
2. Connect the electrode holder cable to the positive (+) terminal on the welder.
3. Fastgør jorden clamp sikkert fastgjort til emnet eller svejsebordet, hvilket sikrer god elektrisk kontakt.

6. Betjeningsvejledning

The FLARING FM155 offers three welding modes: Gasless MIG, Stick, and Lift TIG. Select the appropriate mode using the controls on the front panel.

6.1 Gasless MIG Welding

Gasless MIG welding uses flux-cored wire, eliminating the need for external shielding gas. This is ideal for outdoor use or when portability is key.

1. Ensure flux-cored wire is correctly installed (refer to Section 5.2).
2. Select "MIG Gasless" mode on the control panel.
3. Adjust current (Ampalder) og volumentage settings based on the material thickness and wire diameter. The LED display will guide you.
4. Position the MIG torch at the desired angle (typically 10-15 degrees from vertical) and maintain a consistent stick-out.
5. Press the trigger to initiate the arc and begin welding.

6.2 Pinne-svejsning (MMA)

Stick welding (Manual Metal Arc) is a robust process suitable for various metals and conditions.

1. Tilslut elektrodeholderen og jordforbindelsenamp (se afsnit 5.3).
2. Select "Stick/MMA/ARC" mode on the control panel.
3. Insert the appropriate welding electrode into the electrode holder.
4. Juster strømmen (Amperage) based on the electrode type and diameter, and material thickness.
5. Strike the arc by lightly touching and quickly lifting the electrode from the workpiece. Maintain a consistent arc length and travel speed.

6.3 Lift TIG-svejsning

Lift TIG welding provides precise control and high-quality welds. An additional Lift TIG torch is required (not included).

1. Tilslut jorden clamp and your Lift TIG torch (not included) to the welder.
2. Select "Lift TIG" mode on the control panel.
3. Juster strømmen (Amperage) as needed for your material and tungsten size.
4. Gently touch the tungsten electrode to the workpiece to initiate the arc, then lift slightly to establish the arc.
5. Feed filler rod manually into the weld puddle as you progress.

6.4 Welding Samples

The FLARING FM155 is capable of welding various materials and joint types, including iron block, galvanized pipe, round tube, chair frames, stainless steel, and general steel frames.

7. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your FLARING FM155 welder. Always disconnect power before performing any maintenance.

• Rensning: Periodically clean the exterior of the welder with a dry cloth. Use compressed air to blow out dust and debris from the cooling vents.
• Trådfremføringssystem: Inspect the wire feed rollers and guides for wear or debris. Clean as necessary to ensure smooth wire feeding. Replace worn contact tips and gas nozzles regularly.
• Kabelinspektion: Check all cables (power, MIG torch, electrode holder, ground clamp) for cuts, fraying, or damaged insulation. Replace damaged cables immediately.
• Opbevaring: Opbevar svejsemaskinen i et rent, tørt miljø, væk fra for meget støv, fugt og ekstreme temperaturer.

8. Fejlfinding

This section addresses common issues you might encounter with your FLARING FM155 welder. If the problem persists after attempting these solutions, please contact customer support.

9. Specifikationer

Detailed technical specifications for the FLARING FM155 3-in-1 MIG Welder:

10. Garanti og support

For warranty information, technical support, or service inquiries regarding your FLARING FM155 welder, please refer to the contact details provided on the product packaging or visit the official FLARING webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

Du kan også besøge FLARING Store on Amazon for mere information og supportressourcer.