FLARING 155Amp Brugermanual til MIG-svejser

1. Introduktion

This manual provides comprehensive instructions for the safe and effective operation, setup, maintenance, and troubleshooting of your FLARING 155Amp MIG Welder. This versatile 3-in-1 machine supports Gasless MIG, Stick, and Lift TIG welding, designed for various applications from home projects to professional use.

2. Sikkerhedsoplysninger

Prioritér altid sikkerheden ved brug af svejseudstyr. Manglende overholdelse af sikkerhedsretningslinjerne kan resultere i alvorlig personskade eller død.

• Bær passende personlige værnemidler (PPE), herunder svejsehjelm, handsker og beskyttelsestøj.
• Sørg for tilstrækkelig ventilation for at undgå indånding af svejserøg.
• Hold brændbare materialer væk fra svejseområdet.
• Afbryd altid strømmen, før du udfører vedligeholdelse eller skifter tilbehør.
• Do not operate the welder in wet conditions.
• Consult local safety regulations and standards.

3. Produktet er slutview

The FLARING 155Amp MIG Welder (Model FM155-42CA) is a compact and powerful 3-in-1 welding machine. It features a large LED digital display for clear control and easy operation.

Figure 3.1: FLARING 155Amp MIG Welder and included accessories.

3.1 Nøglefunktioner:

• 3-in-1 Multi-function: Capable of Gasless MIG, Stick (MMA), and Lift TIG welding. (Note: Lift TIG torch sold separately).
• Høj ydeevne: Maximum output of 155A, suitable for mild steel up to 4mm (3/20"). Supports 0.8mm, 0.9mm, and 1.0mm flux-cored wire.
• Large LED Digital Display: Provides clear readings for welding mode, current, and voltage, enhancing operational efficiency.
• Bærbart design: Weighs only 12 pounds (5.67 kg) with a convenient handle for easy transport.
• Avanceret teknologi: Incorporates IGBT inverter technology for stable and smooth arc performance, along with overheat/overload protection and efficient cooling.

Figure 3.2: Illustration of the 3-in-1 multi-function capabilities of the FM-155 welder.

Figur 3.3: Nærbillede view of the large LED digital display, showing welding parameters.

4. Opsætning

4.1 Udpakning og inspektion:

Carefully unpack all components and inspect for any shipping damage. Retain original packaging for future transport or storage.

• 1 x MIG155A Welder
• 1 x MIG Welding Torch (3M)
• 1 x 0.8 Flux Cored Wire (0.5kg)
• 1 x Electronic Holder
• 1 x Brush & Hammer
• 1 x formalet kloramp (2M)
• 4 x Contact tips
• 2 x Gaiser
• 1 x Brugermanual (dette dokument)

Figure 4.1: All standard accessories included with the FLARING FM155 welder.

4.2 Connecting the Welder:

1. Connect the MIG Welding Torch to the appropriate port on the front panel.
2. Attach the Ground Clamp til emnet eller svejsebordet, og sørg for god elektrisk kontakt.
3. For Stick welding, connect the Electronic Holder to the positive terminal and the Ground Clamp til den negative terminal.
4. For Lift TIG welding, connect the TIG torch (sold separately) to the appropriate terminal and the Ground Clamp til den negative terminal.

4.3 Installing Flux-Cored Wire (for MIG Gasless):

The welder features a stable and smooth wire feed structure.

1. Åbn trådfremføringsrummet.
2. Place the 0.5kg flux-cored wire spool onto the spindle.
3. Thread the wire through the wire pressing wheel and into the automatic wire feed mechanism.
4. Ensure the wire feeding wheel is correctly sized for the 0.8mm flux-cored wire. The welder supports 0.030" (0.8mm), 0.035" (0.9mm), and 0.040" (1.0mm) flux core wire sizes.
5. Luk rummet.

Figur 4.2: Intern view of the wire feed structure, showing the spool and feeding mechanism.

5. Betjeningsvejledning

The FLARING FM155 offers three welding modes: Gasless MIG, Stick (MMA), and Lift TIG. Select the appropriate mode using the controls on the large LED digital panel.

Figure 5.1: Visual representation of the three welding modes: MMA/Stick, Flux Cored Wire (MIG), and Lift TIG.

5.1 Gasless MIG Welding:

This mode is ideal for welding stainless steel, carbon steel, and thicker steel without the need for external shielding gas, using flux-cored wire.

1. Ensure flux-cored wire is correctly installed (refer to Section 4.3).
2. Select "MIG Gasless" mode on the control panel.
3. Adjust current and voltage settings as required for your material thickness. The machine provides clear digital readouts.
4. Begynd svejsningen, og hold en konstant bevægelseshastighed og lysbuelængde.

5.2 Stick (MMA) Welding:

For stick welding, ensure the electronic holder and ground clamp are connected as described in Section 4.2.

1. Insert the appropriate electrode into the electronic holder.
2. Select "Stick/MMA/ARC" mode on the control panel.
3. Juster strømmen (amperage) according to the electrode type and material thickness.
4. Strike an arc and maintain a consistent arc length and travel speed for optimal results.

5.3 Lift TIG Welding:

For Lift TIG welding, an additional Lift TIG torch is required (sold separately). This mode provides precise control for delicate welding tasks.

1. Connect the Lift TIG torch and ensure proper tungsten electrode installation.
2. Select "Lift TIG" mode on the control panel.
3. Adjust current settings.
4. Start lysbuen ved forsigtigt at berøre wolframen mod emnet og løfte den let.

5.4 Welding Samples:

The FLARING FM155 is capable of welding various materials and shapes, including iron blocks, galvanized pipes, round tubes, chairs, stainless steel, and steel frames.

Figur 5.2: Eksamples of welds performed on different materials and structures, showcasing the versatility of the welder.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din svejsemaskines levetid og optimale ydeevne.

• Rensning: Periodically clean the welder's exterior and ventilation openings to prevent dust and debris buildup. Use a dry, soft cloth.
• Kontakttips: Inspect and replace contact tips regularly, especially for MIG welding, to ensure consistent wire feeding and arc stability.
• Jord Clamp & Cables: Kontroller jordcirkulationenamp and all cables for damage or loose connections before each use.
• Opbevaring: Opbevar svejsemaskinen et tørt og rent sted, når den ikke er i brug.

Figure 6.1: The welder features internal cooling and protection systems to ensure durability and safe operation.

7. Fejlfinding

This section addresses common issues you might encounter with your FLARING 155Amp MIG Welder.

8. Specifikationer

Detailed technical specifications for the FLARING 155Amp MIG Welder (Model FM155-42CA).

Figure 8.1: Detailed specification label for the FLARING FM-155 welder.

9. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official FLARING webwebstedet. Behold din købskvittering som købsbevis.