INKBIRDPLUS Plug-in Temperature Controller User Manual

1. Introduktion

The INKBIRDPLUS Plug-in Temperature Controller is a versatile and intelligent device designed to precisely manage temperature for a wide range of applications. It supports both heating and cooling modes, offering four flexible timing functions and a clear backlit LCD for easy operation. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Produktet er slutview

Figur 2.1: Labeled diagram of the INKBIRDPLUS temperature controller, showing its various parts including the measured temperature display, start and stop temperature settings, indicator light, power outlet, mode switch, control buttons, and the external temperature probe.

Komponenter:

• Measured Temp Display: Shows the current temperature detected by the probe.
• Heating Mode Indicator: Illuminates when the device is in heating mode.
• Cooling Mode Indicator: Illuminates when the device is in cooling mode.
• Start Temp Setting: The temperature at which the connected device will activate (for heating) or deactivate (for cooling).
• Stop Temp Setting: The temperature at which the connected device will deactivate (for heating) or activate (for cooling).
• Indikatorlys: Giver statusfeedback.
• Stikkontakt: Where the heating or cooling device is plugged in.
• Mode Switch knap: Used to cycle through different operating modes.
• Indstil/Bekræft-knap: Used to enter settings and confirm selections.
• Op-knap: Bruges til at øge værdier eller navigere i menuer.
• Ned-knap: Bruges til at mindske værdier eller navigere i menuer.
• Temperaturprobe: External sensor for accurate temperature measurement.

3. Nøglefunktioner

Figur 3.1: Overview of the INKBIRDPLUS temperature controller's main features, including heating/cooling, periodic timing, backup memory, temperature calibration, and a backlit LCD screen.

• Dual Mode Temperature Control: Compatible with both heating and cooling devices, allowing you to maintain optimal temperatures in various environments.
• 4 Flexible Timing Modes: Offers advanced control with CD TC ON, CD TC OFF, CD ON Timer, and CD OFF Timer modes for customized automatic operation.
• High-Brightness Backlit LCD Display: Provides clear visibility of all values, including current, start, and stop temperatures, and countdown time, in any lighting condition. The backlight can be switched off for lower power consumption.
• Temperaturkalibreringsfunktion: Ensures long-term precision control with a wide temperature range of -40 to 120 ℃ (-40 to 248 ℉) and a measurement accuracy of ±1 ℃/℉.
• Carefree Backup Memory: Automatically saves all personalized settings in case of a power cut, eliminating the need for reprogramming.
• Alsidige applikationer: Ideal for a variety of uses including reptile habitats, incubation, aquariums, refrigerators, home brewing, and more.
• IP67 Waterproof Temperature Probe: The external probe is designed to be suitable for both wet and dry environments, ensuring durability and reliability.

4. Specifikationer

Figur 4.1: Physical dimensions of the INKBIRDPLUS temperature controller and its temperature probe.

5. Opsætning

1. Pak enheden ud: Carefully remove the temperature controller and its probe from the packaging.
2. Tilslut: Insert the temperature controller into a standard 120V AC power outlet. The LCD screen will illuminate.
3. Position the Probe: Place the temperature probe in the environment where you wish to measure and control the temperature. Ensure the probe is securely positioned and not directly exposed to heat sources or drafts that could skew readings. The IP67 rating allows for use in wet environments like aquariums.
4. Tilslut din enhed: Plug your heating or cooling appliance (e.g., heater, fan, refrigerator) into the power outlet on the front of the temperature controller.

6. Betjeningsvejledning

6.1 Basic Temperature Control (Heating/Cooling Modes)

Figur 6.1: The controller's ability to manage both heating and cooling, with its wide temperature range.

1. Tænd: Ensure the controller is plugged in and the LCD is active.
2. Set Start Temperature:
   • Tryk på SÆT button once. The 'Start Temperature' value will begin to flash.
   • Brug UP or NED buttons to adjust the desired start temperature.
   • Trykke SÆT again to confirm and move to the Stop Temperature setting.
3. Set Stop Temperature:
   • The 'Stop Temperature' value will flash.
   • Brug UP or NED buttons to adjust the desired stop temperature.
   • Trykke SÆT again to confirm and exit the temperature setting mode.
4. Select Mode (Heating/Cooling):
   • The controller automatically determines heating or cooling mode based on your Start and Stop temperature settings.
   • If Start Temp < Stop Temp: The controller operates in Opvarmningstilstand. The connected device will turn ON when the measured temperature drops below the Start Temp and turn OFF when it reaches the Stop Temp.
   • If Start Temp > Stop Temp: The controller operates in Køletilstand. The connected device will turn ON when the measured temperature rises above the Start Temp and turn OFF when it reaches the Stop Temp.

6.2 Flexible Timing Modes

The INKBIRDPLUS controller offers four advanced timing modes for precise control over your connected devices. These modes are accessed by pressing the Mode switch knappen (husikon).

Figur 6.2: Visual guide to the four timing modes: CD TC ON, CD TC OFF, CD ON Timer, and CD OFF Timer.

1. CD TC ON Mode (Countdown Temperature Control ON):
   • In this mode, the device will operate according to the set temperature control (TC) mode (heating or cooling) efter a specified countdown timer ends.
   • Use Case: You want a device to start maintaining a specific temperature only after a certain delay (e.g., start heating a terrarium 30 minutes after lights turn on).
   • For at indstille: Tryk Mode switch until "CD TC ON" appears. Press SÆT, og brug derefter OP/NED to set the countdown time (Hours:Minutes). Press SÆT for at bekræfte.
   

   Figur 6.3: Setting the countdown time for CD TC ON mode.

2. CD TC OFF Mode (Countdown Temperature Control OFF):
   • In this mode, the device will operate according to the set temperature control (TC) mode (heating or cooling) indtil a specified countdown timer ends. Once the countdown finishes, the temperature control function will stop.
   • Use Case: You want to maintain a specific temperature for a set duration, then turn off the control (e.g., maintain incubation temperature for 24 hours, then stop).
   • For at indstille: Tryk Mode switch until "CD TC OFF" appears. Press SÆT, og brug derefter OP/NED to set the countdown time (Hours:Minutes). Press SÆT for at bekræfte.
   

   Figur 6.4: Setting the countdown time for CD TC OFF mode.
3. CD ON Timer (Countdown ON Timer):
   • In this mode, the connected device will turn ON efter a specified countdown timer ends, regardless of temperature.
   • Use Case: You want a device to simply turn on after a delay (e.g., turn on a fan after 1 hour).
   • For at indstille: Tryk Mode switch until "CD ON" appears. Press SÆT, og brug derefter OP/NED to set the countdown time (Hours:Minutes). Press SÆT for at bekræfte.
4. CD OFF Timer (Countdown OFF Timer):
   • In this mode, the connected device will turn OFF efter a specified countdown timer ends, regardless of temperature.
   • Use Case: You want a device to simply turn off after a delay (e.g., turn off a light after 30 minutes).
   • For at indstille: Tryk Mode switch until "CD OFF" appears. Press SÆT, og brug derefter OP/NED to set the countdown time (Hours:Minutes). Press SÆT for at bekræfte.

6.3 Temperaturkalibrering

Figur 6.5: The temperature calibration feature allows for fine-tuning the temperature reading.

If you find that the temperature displayed by the controller does not match a known accurate thermometer, you can calibrate it. This function allows you to adjust the measured temperature reading by a certain offset (±9 ℃/℉).

1. Gå ind i kalibreringstilstand: With the device in normal operating mode, press and hold the SÆT button for approximately 3 seconds until the display changes to show a calibration value (e.g., "0.0").
2. Adjust Calibration Value: Brug UP or NED buttons to adjust the offset. Increase the value if the controller reads lower than actual, decrease if it reads higher.
3. Bekræft indstilling: Tryk på SÆT button again to save the calibration and exit the mode. The controller will now display the adjusted temperature.

6.4 Backlight Control

Figur 6.6: The backlit LCD screen provides clear visibility in various lighting conditions.

To conserve power or for use in dark environments, you can toggle the backlight. Simply press the NED button briefly to turn the backlight ON or OFF.

6.5 Hukommelsesfunktion

The INKBIRDPLUS controller features a built-in memory system. In the event of a power outage, all your previously set parameters (start/stop temperatures, timing modes, calibration) are automatically saved. When power is restored, the device will resume operation with your last settings, ensuring continuous and reliable control without the need for manual reprogramming.

7. Ansøgninger

Figur 7.1: The INKBIRDPLUS temperature controller is suitable for a wide range of applications, including home brewing, incubation, refrigeration, home climate control, reptile habitats, aquariums, and even e-bike charging.

This temperature controller is highly versatile and can be integrated into numerous scenarios requiring precise temperature management:

• Hjemmebrygning: Maintain optimal fermentation temperatures for beer and wine.
• Inkubation: Ensure stable temperatures for hatching eggs or cultivating cultures.
• Reptile/Amphibian Habitats: Create precise temperature gradients for terrariums and vivariums.
• Akvarier: Reguler vandtemperaturen for vandlevende organismer.
• Refrigeration/Freezing: Control mini-fridges or freezers for specific storage needs.
• Drivhuse: Manage heating or cooling for plant growth.
• Home Climate Control: Use with space heaters or window air conditioners for localized temperature regulation.
• E-bike Charging: Can be used to control charging environments for optimal battery life.

8. Vedligeholdelse

• Rensning: Disconnect the device from power before cleaning. Wipe the main unit with a soft, damp klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke hovedenheden i vand.
• Probepleje: The temperature probe is IP67 waterproof and can be used in wet environments. However, avoid bending the probe cable excessively or subjecting it to sharp impacts. Clean the probe regularly to ensure accurate readings, especially if used in environments with residue buildup.
• Opbevaring: When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.

9. Fejlfinding

10. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the product packaging or contact INKBIRDPLUS customer service directly through their official website or the platform where the product was purchased. Please have your model number (INK+TC819-US) and purchase details ready when contacting support.