Citizen Eco-Drive Classic Watch BM7620-83L User Manual

1. Introduktion

Thank you for choosing a Citizen Eco-Drive watch. This timepiece is powered by light, eliminating the need for battery replacement. This manual provides essential information for the proper setup, operation, and maintenance of your Citizen Men's Eco-Drive Classic Silver-Tone Stainless Steel Bracelet Watch, Model BM7620-83L. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

Figur 1: Forside view of the Citizen Eco-Drive Classic Watch BM7620-83L, showcasing the blue dial and silver-tone stainless steel bracelet.

2. Opsætning

2.1 Indledende opladning

Your Eco-Drive watch is powered by light. Before initial use, or if the watch has stopped, expose it to bright light (natural or artificial) for several hours to ensure a full charge. The watch will begin operating once sufficient light is absorbed.

2.2 Indstilling af tid og dato

1. Træk kronen: Træk forsigtigt kronen ud til den første klikposition for at indstille datoen, eller til den anden klikposition for at indstille klokkeslættet.
2. Indstil datoen: (First click) Turn the crown clockwise or counter-clockwise until the correct date appears in the date window. Avoid setting the date between 9:00 PM and 1:00 AM, as this may interfere with the automatic date change mechanism.
3. Indstil tiden: (Second click) Turn the crown to move the hour and minute hands. To ensure accurate time setting, advance the minute hand four to five minutes past the desired time, then turn it back to the exact time.
4. Skub kronen tilbage: Once the time and date are set, push the crown back into the normal position. The second hand will begin to move, indicating the watch is operating.

Figur 2: Side view af uret, der viser kronen til justering af tid og dato.

3. Betjening af dit ur

3.1 Tidtagning

Your watch features a standard 3-hand movement (hour, minute, second) for precise timekeeping.

3.2 Datovisning

The date window at the 3 o'clock position displays the current day of the month. The date will automatically advance at midnight.

4. Pleje og vedligeholdelse

4.1 Rengøring

To maintain the appearance of your stainless steel watch, wipe it regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then rinse thoroughly with clean water and dry immediately. Avoid harsh chemicals or abrasive materials.

4.2 Vandtæthed

This watch is rated for 100 meters (10 BAR) of water resistance. This means it is suitable for swimming, showering, and snorkeling. However, it is not recommended for scuba diving. Always ensure the crown is fully pushed in before exposing the watch to water.

4.3 Power Reserve

To ensure continuous operation, expose your Eco-Drive watch to light regularly. If stored in darkness, the power reserve may deplete, causing the watch to stop. A full charge can last for several months in darkness.

Figur 3: Bagside view of the watch, showing the stainless steel case back with water resistance rating.

5. Fejlfinding

• Watch has stopped: Expose the watch to bright light for several hours to recharge the Eco-Drive movement.
• Date changes at noon: This indicates the AM/PM setting is incorrect. Advance the time by 12 hours.
• Hands are not moving: After charging, if the watch still does not operate, perform a time reset as described in Section 2.2. If the issue persists, contact Citizen customer support.

6. Produktspecifikationer

7. Garanti og support

Your Citizen Eco-Drive watch comes with a 5-year limited warranty. An additional 1-year of coverage may be available upon product registration. For complete warranty details, service information, and customer support, please visit the official Citizen webwebstedet eller kontakt deres autoriserede servicecentre.

Figure 4: The watch presented in its official Citizen packaging.