TREKURE 10-i-1 Jumpstarter med luftkompressor Brugermanual

Indledning

Thank you for choosing the TREKURE 10-in-1 Jump Starter with Air Compressor. This versatile device combines a powerful 6000A jump starter, a 160 PSI air compressor, a 45W fast-charging power bank, and a 600 lumen LED emergency light. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance for dead batteries, flat tires, and emergency lighting. Please read this manual thoroughly before use to ensure proper operation and maximize the lifespan of your device.

Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden og dit køretøj.

• Brug ikke jumpstarteren, hvis kablerne eller koblingerne eramps er beskadiget.
• Ensure proper polarity when connecting to a vehicle battery (red to positive, black to negative). Reverse polarity can cause damage.
• Start ikke med et frossent batteri.
• Hold enheden væk fra børn.
• Udsæt ikke enheden for regn eller ekstreme temperaturer.
• Brug enheden i et godt ventileret område.
• Brug øjenbeskyttelse, når du starter et køretøj med startkabler.
• Skil ikke enheden ad. Overlad al service til kvalificeret personale.
• The included insulated gloves are for emergency and professional tasks, providing protection up to 400V.

Pakkens indhold

Tjek venligst pakken for følgende varer:

• TREKURE Beta07 Jump Starter with Air Compressor
• Smart Jumper Clamps
• Air Hose with Nozzles (for various inflatables)
• USB-C ladekabel
• Isolerede handsker
• Brugermanual
• Opbevaringskasse

Produkt overview

Figur 1: Forside view of the TREKURE Beta07 Jump Starter showing the large display, control buttons, and integrated air hose.

The TREKURE Beta07 features a robust design with an intuitive interface.

• Large 3.3-inch LCD Display: Viser batteriniveau, trykaflæsninger og driftsstatus.
• Power knap: Tænder/slukker enheden.
• Boost knap: For forced jump starting.
• Air Compressor Controls: Buttons for inflation mode selection (+/-), unit selection (M), and start/stop (U).
• USB-C Port (PD 45W In/Out): For fast charging the device and external devices.
• USB-A Ports (2 x 18W Out): Til opladning af andre elektroniske enheder.
• Starthjælpsport: For connecting the smart jumper clamps.
• Luftslangeport: Til tilslutning af luftslangen.
• LED lys: Multi-mode emergency light.

Opladning af enheden

Figure 2: The TREKURE Beta07 connected to a power source via its USB-C PD 45W port for rapid charging.

Before first use, fully charge the TREKURE Beta07. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not used.

1. Connect the provided USB-C charging cable to the USB-C (PD 45W In/Out) port on the jump starter.
2. Connect the other end of the USB-C cable to a compatible 45W PD wall charger (not included) or a suitable USB power adapter.
3. The LCD display will show the charging progress. The device can charge from 0% to 80% in approximately 1 hour with a 45W charger.
4. Når den er fuldt opladet, viser displayet 100 %. Frakobl opladningskablet.

Opsætning

The TREKURE Beta07 is designed for ease of use. No complex setup is required beyond initial charging. Ensure all accessories are present and in good condition before operation.

• Verify the device is fully charged.
• Familiarize yourself with the ports and buttons as described in the "Product Overview" sektion.
• Hold den smarte jumper tætamps and air hose readily accessible.

Betjeningsvejledning

1. Start af et køretøj med startkabler

Figure 3: The TREKURE Beta07 connected to a vehicle battery, ready to jump start.

The TREKURE Beta07 can jump start most 12V vehicles (up to all gasoline engines or 12.0L diesel engines).

1. Sørg for, at jumpstarteren er mindst 50% opladet.
2. Sluk bilens tænding og alt tilbehør.
3. Tilslut den røde (+) clamp of the smart jumper cable to the positive (+) terminal of the vehicle's battery.
4. Tilslut den sorte (-) clamp til den negative (-) pol på køretøjets batteri.
5. Plug the smart jumper cable connector into the jump start port on the TREKURE Beta07. The display will show "Ready" or similar indication.
6. Start køretøjet. Hvis det ikke starter med det samme, vent 30 sekunder og prøv igen. Tørn ikke i mere end 3 sekunder pr. forsøg.
7. Once the vehicle starts, immediately disconnect the smart jumper cable from the jump starter, then disconnect the black (-) clamp, efterfulgt af den røde (+) kl.amp fra køretøjets batteri.
8. If the battery is completely dead, you may need to use the "BOOST" function. Press and hold the "BOOST" button until the display indicates "Forced Start" or similar. Then proceed with starting the vehicle.

2. Using the Air Compressor (Tire Inflator)

Figure 4: The TREKURE Beta07 connected to a car tire, demonstrating its inflation capability.

The integrated 160 PSI air compressor can inflate tires and other inflatables quickly.

1. Connect the air hose to the air hose port on the TREKURE Beta07.
2. Attach the appropriate nozzle to the air hose and connect it securely to the item you wish to inflate (tire valve, ball, etc.).
3. Turn on the device. The display will show the current pressure.
4. Press the 'M' button to cycle through inflation modes (Car, Motorcycle, Bicycle, Ball, Custom).
5. Brug knapperne '+' og '-' til at indstille det ønskede tryk.
6. Press the 'U' button (Start/Stop) to begin inflation. The compressor will automatically stop once the preset pressure is reached.
7. Frakobl luftslangen, og opbevar den korrekt.

3. Brug som powerbank

Figure 5: The TREKURE Beta07 simultaneously charging a smartphone and a tablet via its USB output ports.

The TREKURE Beta07 can charge your electronic devices with its multiple USB output ports.

• USB-C (PD 45W In/Out): Use this port for fast charging compatible laptops, smartphones, and tablets.
• USB-A (2 x 18W Out): Use these ports for charging other USB-powered devices.

Simply connect your device's charging cable to the appropriate port on the TREKURE Beta07, and charging will begin automatically.

4. Using the LED Emergency Lights

Figure 6: The TREKURE Beta07's LED light providing illumination in a dark engine compartment.

The built-in 600 lumen LED light offers four modes for various situations.

• Lommelygte: Til generel belysning.
• Strobe: Til signalering eller tiltrækning af opmærksomhed.
• Warning (Orange Strobe): For roadside emergencies.
• SOS: Til nødsignalering.

To activate the light, press the dedicated light button. Press repeatedly to cycle through the modes.

Opretholdelse

Proper maintenance ensures the longevity and optimal performance of your TREKURE Beta07.

• Rensning: Tør enheden af ​​med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Opbevar enheden et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer. Brug den medfølgende opbevaringsetui til beskyttelse.
• Genopladning: Recharge the device every 3-6 months, even if not used, to prevent battery degradation.
• Kabelpleje: Inspect jumper cables and air hose for any damage before each use. Replace if necessary.

Fejlfinding

Specifikationer

Garanti og support

TREKURE offers a 3-year hassle-free return policy and lifetime technical support for the Beta07 Jump Starter.

For any issues or inquiries, please contact TREKURE customer support. You can find contact information on the official TREKURE webwebsted eller via din købsplatform.

To extend your warranty to three years, register your product on the TREKURE webwebsted inden for 7 dage efter købet.