Hughes Power Watchdog PWD30EPOW Smart RV Portable Surge Protector

1. Introduktion

This manual provides essential information for the safe and effective use of your Hughes Power Watchdog PWD30EPOW Smart RV Portable Surge Protector. This device is designed to safeguard your RV's electrical system from voltage fluctuations and power surges, ensuring the longevity of your appliances and electronics. Please read this manual thoroughly before installation and operation.

2. Sikkerhedsoplysninger

WARNING: Electrical shock hazard. Always ensure power is off before connecting or disconnecting the surge protector.

• Do not immerse the unit in water. The unit is IP65 water-resistant, but not submersible.
• Ensure all connections are secure and dry before applying power.
• Do not use if the unit or its cables are damaged.
• Opbevares utilgængeligt for børn.
• Always plug the Power Watchdog into the power pedestal first, and verify correct power conditions before connecting your RV.

3. Produktet er slutview

The Power Watchdog PWD30EPOW is a smart RV portable surge protector offering advanced electrical protection and monitoring capabilities. It features 2,300 Joules of surge protection and built-in circuit analysis to detect unsafe power conditions. With patented Wi-Fi and Bluetooth connectivity, you can monitor your RV's power usage in real-time via a mobile application.

Nøglefunktioner:

• 2,300 Joules of Surge Protection
• Automatic Power Shut-off for Low/High Voltage (below 104V or above 132V)
• Patented Wi-Fi and Bluetooth Connectivity for Remote Monitoring
• Realtid Voltage, Amperage og Wattage Display via Mobile App
• Replaceable Surge Module (no need to replace entire unit after a surge)
• IP65 Water-Resistant Casing for Outdoor Use
• LED Diagnostic Lights for Immediate Status Indication
• Wireless Fault Alerts
• Compatibility with Dogbone Adapters

Komponenter:

• Power Watchdog PWD30EPOW Unit
• Attached 30 Amp Strømkabel
• Locking Ring (for securing to pedestal)

Figure 3.1: The Hughes Power Watchdog PWD30EPOW Smart RV Portable Surge Protector.

Figure 3.2: The Power Watchdog unit with its protective cover open, revealing the internal components and connection points.

4. Opsætning

4.1 Første tilslutning

1. Ensure the power breaker at the RV pedestal is in the SLUKKET position.
2. Plug the Power Watchdog PWD30EPOW directly into the 30 Amp outlet on the RV power pedestal.
3. Turn the power breaker at the RV pedestal to the ON position.
4. Observe the LED diagnostic lights on the Power Watchdog unit. Refer to Section 6 (Troubleshooting) for interpretation of the lights. All green lights indicate a safe connection.
5. Once safe power is confirmed, connect your RV's power cord to the Power Watchdog unit.
6. For added security, use the provided locking ring to secure the unit to the power pedestal.

Figur 4.1: Nærbillede view of the LED diagnostic lights on the Power Watchdog unit, indicating power status and potential faults.

4.2 Mobile App Connectivity (Wi-Fi & Bluetooth)

1. Download the official Power Watchdog mobile application from your device's app store.
2. Sørg for, at Bluetooth er aktiveret på din mobilenhed.
3. Open the app and follow the on-screen instructions to pair with your PWD30EPOW unit via Bluetooth.
4. For Wi-Fi connectivity, configure the unit through the app to connect to a local Wi-Fi network (e.g., campground Wi-Fi or mobile hotspot). This enables remote monitoring.

5. Betjeningsvejledning

5.1 Monitoring Power Conditions

• Once connected, the Power Watchdog continuously monitors incoming power.
• Brug mobilappen til view realtidsvolumentage, amperage, og wattage readings. This allows you to track your RV's power consumption and ensure stable power delivery.
• The unit will automatically shut off power to your RV if voltage drops below 104V or rises above 132V. Power will be restored after 90 seconds of stable conditions.

5.2 Fault Alerts and Customization

• The mobile app will send wireless fault alerts to your device if unsafe power conditions are detected.
• Within the app, you may be able to customize certain voltage thresholds or alert preferences, depending on the app version and unit firmware.

6. Vedligeholdelse

6.1 Replaceable Surge Module

The Power Watchdog PWD30EPOW features a replaceable surge module. In the event of a significant power surge that sacrifices the module to protect your RV, the module can be easily replaced without needing to purchase a new unit. This is indicated by the surge protection LED turning off.

1. Ensure all power to the unit is disconnected.
2. Open the protective cover of the unit.
3. Carefully remove the old surge module.
4. Insert the new surge module, ensuring it is properly seated.
5. Close the protective cover and re-connect power.

6.2 Rengøring og opbevaring

• Rengør enheden med adamp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Ensure the unit is dry before storage.
• Opbevares på et køligt, tørt sted, når det ikke er i brug.

7. Fejlfinding

7.1 LED Diagnostic Lights

The Power Watchdog unit features a series of LED lights that indicate the status of the incoming power. Refer to the guide on the unit itself or the table below for interpretation:

Figure 7.1: Diagram showing the LED diagnostic lights and their corresponding power conditions.

7.2 Fælles problemer

• Enheden tænder ikke: Ensure the power pedestal breaker is on and the unit is fully plugged in.
• Appen opretter ikke forbindelse: Verify Bluetooth is on, the unit is powered, and you are within range. For Wi-Fi, check network credentials and signal strength.
• Frequent power interruptions: This indicates unstable power at the source. The Power Watchdog is functioning as designed to protect your RV. Consider moving to a different site or using a voltage booster if low voltage is persistent.

8. Specifikationer

9. Garanti og support

9.1 Begrænset livstidsgaranti

The Hughes Power Watchdog PWD30EPOW is backed by a limited lifetime warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty information provided with your product packaging or contact Power Watchdog customer support.

9.2 Kundesupport

For technical assistance, troubleshooting, or warranty claims, please contact Power Watchdog customer support through their official webwebstedet eller kontaktoplysningerne i din produktdokumentation. Hav altid dit modelnummer og købsdato klar, når du kontakter support.