Vinsetto Executive Massage Kontorstol (Model 921-667V80GY) Brugsanvisning

Vigtige sikkerhedsoplysninger

Læs og forstå venligst alle instruktioner, før du samler og bruger denne stol. Gem denne manual til senere brug.

• Følg altid monteringsvejledningen nøje.
• Overskrid ikke den maksimale vægtkapacitet for 265 lbs (120 kg).
• Be cautious when adjusting the chair's height, recline, and massage functions to avoid injury.
• Sørg for, at alle bolte og skruer er forsvarligt spændt før brug. Kontroller med jævne mellemrum og efterspænd efter behov.
• Hold børn og kæledyr væk under montering.
• Use the chair only on a stable, level surface.
• Avoid placing heavy objects on the chair's backrest when reclined.

Produkt overview

The Vinsetto Executive Massage Office Chair is designed to provide comfort and support during extended periods of sitting. It features adjustable height, a reclining backrest, an extendable footrest, and integrated vibration massage with heat functions.

Image: The Vinsetto Executive Massage Office Chair in Grey, positioned in an office environment.

Image: Key features of the chair including faux leather upholstery, thick padding, gas lift, sturdy base, and swivel design.

Komponentliste

Before assembly, ensure all components are present and undamaged. Refer to the included parts diagram in your packaging for specific identification.

• Stol Ryglæn
• Seat Cushion with Footrest
• Armlæn (venstre og højre)
• Base (Stjernebase)
• Hjul (hjul)
• Gas Lift cylinder
• Mekanismeplade
• Fjernbetjening
• Strømadapter
• Hardwarepakke (skruer, skiver, unbrakonøgle)

Monteringsvejledning

Assembly typically requires two people. Follow the step-by-step instructions provided in the separate assembly guide included with your chair. The assembly guide is often located in the packaging of the seat cushion.

1. Fastgør hjul til basen: Insert the casters into the holes at the end of each leg of the star base.
2. Indsæt gasløft: Placer gasløftecylinderen i centerhullet på stjernebasen.
3. Fastgør mekanismeplade: Secure the mechanism plate to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
4. Tilslut sæde til gaslift: Placer forsigtigt det samlede sæde på gasløftecylinderen.
5. Fastgør armlæn: Secure the armrests to both the seat cushion and the backrest using the designated screws. It may be easier to lay the chair down for this step.
6. Fastgør ryglæn: Connect the backrest to the seat and armrests. Ensure all screws are aligned and tightened.
7. Tilslut strøm: Plug the power adapter into the chair's power port and then into a wall outlet for the massage and heat functions.

Note: Some users find it helpful to tighten the footrest screws after initial assembly to ensure stability.

Image: A fully assembled Vinsetto Executive Massage Office Chair, ready for use.

Betjeningsvejledning

Højdejustering

To adjust the chair's height, locate the lever on the right side beneath the seat.

• For at hæve sædet: While seated, lift the lever and slightly lift your weight off the seat. The seat will rise. Release the lever at the desired height.
• Sådan sænkes sædet: While seated, lift the lever and apply your weight to the seat. The seat will lower. Release the lever at the desired height.

Billede: Illustration af højdejusteringshåndtaget og dets funktion.

Reclining Function and Footrest

The chair allows for reclining up to 135 degrees and includes an extendable footrest for enhanced relaxation.

• At læne sig tilbage: Locate the reclining lever (often on the left side). Pull the lever up and lean back to the desired angle. Release the lever to lock the position.
• Sådan vender du tilbage oprejst: Pull the reclining lever up and lean forward.
• To extend the footrest: Pull the footrest handle located beneath the front of the seat. Extend the footrest outwards. Push it back in when not in use.

Image: Visual guide to the chair's reclining capabilities, from upright to a 135-degree recline.

Vibration Massage and Heat Functions

The chair is equipped with four-point vibration massage and a three-level lumbar heating function, controlled by a remote.

• Tænd/sluk: Tryk på tænd/sluk-knappen på fjernbetjeningen.
• Massagetilstande: Select from three massage modes (M1, M2, M3) to vary the vibration pattern.
• Intensitetsniveauer: Adjust the vibration intensity (L, M, H) to your preference.
• Varme funktion: Activate the lumbar heat function using the dedicated heat button.
• Timerindstillinger: Set a timer for the massage and heat functions using the timer button.

Billede: Overview of the vibration massage points and the remote control for activating massage and heat.

Produktdimensioner

Understanding the chair's dimensions is important for proper placement and use.

Image: Detailed dimensional drawing of the chair, showing overall and specific component measurements.

• Overordnede dimensioner: 25.25 cm B x 27.5 cm D x 43.25 cm - 46.5 cm H
• Sædedimensioner: 20.5" B x 19.75" D
• Justerbar sædehøjde: 17.75" - 20.75"
• Ryglænets bredde: 19.75"
• Armlænshøjde (fra sæde): Approximately 5"

Pleje og vedligeholdelse

Proper care will extend the life and appearance of your Vinsetto office chair.

• Rensning: Tør af med annonceamp klud. Brug om nødvendigt en mild sæbeopløsning til kunstlæder, og tør derefter straks af. Undgå skrappe kemikalier eller slibende rengøringsmidler.
• Regelmæssig kontrol: Periodically inspect all bolts and screws to ensure they are tight. Re-tighten as needed to maintain stability and safety.
• Hjulpleje: Keep casters clean from hair and debris to ensure smooth movement. The PU wheels are designed to be safe for all floor types.

Image: Illustration highlighting the chair's PU wheels, suitable for various floor surfaces.

Fejlfinding

If you encounter issues with your chair, refer to the following common problems and solutions.

Specifikationer

Garanti og support

For warranty information, product support, or to inquire about replacement parts, please contact the manufacturer or retailer where you purchased the Vinsetto Executive Massage Office Chair.

Keep your purchase receipt and model number (921-667V80GY) handy when contacting support.