Weytoll 12V Cordless Brush Angle Grinder Kit User Manual

Indledning

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your Weytoll 12V Cordless Brush Angle Grinder Kit, Model CG1374. Please read this manual thoroughly before using the tool to ensure proper function and to prevent injury.

Pakkens indhold

Figure 1: Complete Weytoll Angle Grinder Kit Contents

Bekræft, at alle nedenstående varer er til stede i din pakke:

• 1 x Cordless Angle Grinder
• 2 x 12V 1300mAh Lithium-Ion Battery
• 1 x Battery Charger (110-240V 50/60Hz input, 12.6V 2.0A output)
• 1 x Pair of Gloves (optional, depending on kit version)
• 6 x Saw Blades (or 2 x Metal Cutting Wheels, depending on kit version)
• 1 x nøgle
• 1 x Brugermanual (engelsk)

Sikkerhedsinstruktioner

Følg altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade, når du bruger dette elværktøj.

Generelle sikkerhedsadvarsler for elværktøj

• Sikkerhed på arbejdsområdet: Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Elværktøjsstik skal passe til stikkontakten. Modificer aldrig stikket på nogen måde. Misbrug ikke ledningen. Hold ledningen væk fra varme, olie, skarpe kanter eller bevægelige dele.
• Personlig sikkerhed: Always wear eye protection (safety goggles), hearing protection, and a dust mask when operating the grinder. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøjet.
• Brug og vedligeholdelse af batteriværktøj: Genoplad kun med den oplader, der er angivet af producenten. Brug kun elværktøj med specifikt beregnede batteripakker.

Produkt overview

Gør dig bekendt med komponenterne i din vinkelsliber inden brug.

Figure 2: Angle Grinder Components

1. Spindellåseknap
2. Skivevagt
3. Spindel
4. Tænd/sluk-knap
5. Batteriudløserknap
6. Batteripakke
7. Ventilationsåbninger

Opsætning

1. Batteriopladning

Before first use, fully charge the battery packs. Ensure the charger is connected to a standard power outlet (110-240V AC). Insert the battery pack into the charger. The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged). Charging time may vary.

2. Diskinstallation

Always ensure the battery is removed from the grinder before installing or changing discs.

1. Tryk og hold spindellåseknappen nede.
2. Placer den indre flange på spindlen.
3. Position the desired cutting or grinding disc onto the spindle, ensuring it sits flush against the inner flange.
4. Thread the outer flange (nut) onto the spindle and tighten it firmly using the provided wrench.
5. Slip spindellåseknappen.

Figure 3: Disc Installation Process

Ensure the disc guard is properly positioned to protect against sparks and debris.

Betjeningsvejledning

1. Tænd/sluk

• At tænde: Insert a charged battery pack. Slide the On/Off switch forward to the "ON" position.
• At slukke: Slide the On/Off switch backward to the "OFF" position.

2. Retningslinjer for brug

Always hold the grinder firmly with both hands during operation. Allow the disc to reach full speed before contacting the workpiece. Apply light, consistent pressure. Do not force the tool, as this can lead to kickback or damage to the tool and disc.

Figure 4: Angle Grinder in Operation

• Skæring: Use a cutting disc. Position the workpiece securely. Make shallow passes, allowing the disc to do the work.
• Slibning: Use a grinding disc. Maintain a slight angle (15-30 degrees) between the disc and the workpiece. Move the grinder smoothly across the surface.
• Polishing/Sanding: Use appropriate sanding or polishing attachments. Apply minimal pressure and move the tool continuously to avoid overheating the surface.

Opretholdelse

1. Rengøring og opbevaring

• After each use, disconnect the battery and clean the tool with a dry cloth. Remove any dust or debris from the ventilation slots to prevent overheating.
• Store the angle grinder and accessories in a dry, secure place, out of reach of children.

2. Batteripleje

• Do not store batteries in direct sunlight or in areas with high temperatures.
• Ved langtidsopbevaring skal batterierne oplades til cirka 50% kapacitet.
• Avoid fully discharging the battery packs, as this can reduce their lifespan.

Fejlfinding

Se tabellen nedenfor for almindelige problemer og deres mulige løsninger.

Specifikationer

Technical specifications for the Weytoll 12V Cordless Brush Angle Grinder Kit.

Figur 5: Produktmål

Garanti og support

Garantioplysninger

Weytoll products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or contact customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Kundesupport

If you encounter any issues or have questions regarding your Weytoll 12V Cordless Brush Angle Grinder Kit, please contact our customer support team. Contact information can typically be found on the product packaging or the official Weytoll website. When contacting support, please have your product model (CG1374) and purchase details ready.