CYCPLUS M1 GPS Cykelcomputer Brugermanual

1. Introduktion

Thank you for choosing the CYCPLUS M1 GPS Bicycle Computer. This device is designed to provide cyclists with accurate and comprehensive data for an improved riding experience. Featuring a large, clear display, robust connectivity, and long battery life, the M1 is your reliable companion on every ride.

Nøglefunktioner:

• 2.9-tommer stor skærm: Anti-glare FSTN display with automatic backlight for clear visibility day and night.
• Dynamic GPS Positioning: High sensitivity and accuracy with fast positioning (approx. 30 seconds after initial setup).
• ANT+ & Bluetooth Connectivity: Supports simultaneous recording of data from various sensors (speed, cadence, heart rate, power) and quick synchronization with the CYCPLUS FIT app.
• IPX6 Vandtæt: Wireless and waterproof design ensures reliable performance in various weather conditions.
• Lang batterilevetid: Built-in 1100mAh battery provides over 30 hours of continuous operation.

Figure 1.1: The CYCPLUS M1 GPS Bicycle Computer.

2. Hvad er der i æsken

Kontroller venligst pakkens indhold for at sikre, at alle varer er til stede:

• GPS Bicycle Computer (M1)
• Permanent Mount
• Gummipude
• 3 x gummibånd
• Brugermanual
• Micro-USB opladningskabel

3. Opsætning og installation

3.1 Montering af enheden

Attach the permanent mount to your bicycle's handlebar or stem using the provided rubber pad and rubber bands. Ensure the mount is securely fastened and the computer can be easily clicked into place.

Figure 3.1: The M1 computer mounted on a bicycle handlebar, highlighting its slim design.

3.2 Initial Power On and Time Zone Setting

Before first use, ensure the device is fully charged. Press and hold the left button to power on the device. It is crucial to set the correct time zone for all functions to operate normally.

3.3 GPS-positionering

The M1 uses GPS signals for tracking. For the first positioning, especially when switching regions (e.g., from factory to Europe), it may take 3-5 minutes to acquire a signal. Subsequent GPS positioning will typically take only about 30 seconds.

Figure 3.2: The M1 utilizes multiple satellite systems for fast and accurate positioning.

4. Betjeningsvejledning

4.1 Knapfunktioner

The M1 features three easy-sense buttons for intuitive control:

• Venstre knap: Short press to start/pause recording. Long press to power off.
• Midterste knap: Short press to count a lap. Long press to save recorded data.
• Højre knap: Short press to navigate to the next page. Long press to enter/exit settings.

Figure 4.1: Diagram illustrating the functions of the M1's buttons.

4.2 Datavisning

The 2.9-inch LCD screen displays various cycling metrics, including current speed, average speed, max speed, clock, temperature, altitude, gradient, ascent, trip distance, trip time, odometer, and lap data. Heart rate, cadence, and power require additional ANT+ sensors.

Figur 4.2: Overview of data displayed on the M1 screen.

4.3 ANT+ sensorparring

The M1 is compatible with ANT+ sensors for heart rate, speed, cadence, and power meters. To pair a sensor, navigate to the settings menu and select the sensor pairing option. Ensure the sensor is active and within range.

Figure 4.3: The M1 supports ANT+ sensors for comprehensive data tracking.

4.4 App Synchronization (CYCPLUS FIT & Strava)

Download the "CYCPLUS FIT" app from the App Store or Google Play. Connect your M1 via Bluetooth to the app to synchronize ride data, analyze your performance, and update firmware. The app also allows you to sync your data directly to Strava and TrainingPeaks.

Figure 4.4: Sync your ride data with the CYCPLUS FIT app and popular platforms like Strava.

5. Vedligeholdelse

5.1 Opladning af batteriet

The M1 has a built-in 1100mAh battery. Charge the device using the provided Micro-USB cable. A full charge takes approximately 3 hours and provides over 30 hours of usage.

Figure 5.1: The M1 charging port, highlighting its long battery endurance.

5.2 Vandtætning (IPX6)

The M1 is IPX6 waterproof, meaning it is protected against powerful water jets. It can be used in rainy conditions without concern. Avoid submerging the device in water.

Figure 5.2: The M1's IPX6 rating ensures protection against splashes and rain.

5.3 Rengøring

Rengør enheden med en blød, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.

6. Fejlfinding

6.1 GPS Positioning Takes Too Long

The first GPS positioning in a new region (e.g., Europe) can take 3-5 minutes as the device switches from the factory satellite to local positioning satellites. Subsequent positioning will be much faster, typically around 30 seconds. Ensure you are in an open area with a clear view af himlen.

6.2 Incorrect Speed Readings

If the speed reading appears too high for the first 15-30 seconds after starting a ride, this can be a temporary anomaly. Ensure your wheel circumference is correctly set in the device settings. If using external sensors, verify they are properly paired and functioning.

6.3 Device Not Turning On/Off or Responding

Ensure the device is charged. If unresponsive, try a soft reset by holding down all three buttons simultaneously for a few seconds. If the issue persists, contact customer support.

7. Specifikationer

8. Garanti og support

CYCPLUS offers a Two-Year Repair / Refund / Replacement Warranty from the date of purchase for the M1 GPS Bicycle Computer. Additionally, lifetime service is provided for the product.

For technical support, warranty claims, or any inquiries, please contact CYCPLUS customer service or visit the official CYCPLUS store:

Visit the CYCPLUS Store on Amazon