1. Produktet er slutview
The ANYCUBIC Photon Mono 4 Ultra is a high-precision 10K resin 3D printer designed for detailed model creation. It features a 7-inch monochrome screen, a COB light source, and intelligent detection systems to enhance printing efficiency and accuracy.
Image 1.1: The ANYCUBIC Photon Mono 4 Ultra 3D Printer alongside a detailed resin-printed miniature.
2. Hvad er der i æsken
Before beginning, verify that all components are present in the packaging:
- ANYCUBIC Photon Mono 4 Ultra 3D Printer
- Print platform
- Harpiks Vat
- Scrapers (2)
- Sekskantnøglesæt
- Udjævningspapir
- Anti-Scratch Film Kit
- USB-drev
- Strømledning
- Handsker
- Tragt
- Usage Instructions (this manual)
Image 2.1: A visual representation of all items included with the ANYCUBIC Photon Mono 4 Ultra 3D Printer.
3. Opsætning
3.1 Udpakning og placering
- Fjern forsigtigt alle komponenter fra emballagen.
- Place the printer on a stable, level surface in a well-ventilated area. Avoid direct sunlight and dusty environments.
- Ensure adequate space around the printer for operation and maintenance.
3.2 Screen Protector Installation
It is recommended to install the anti-scratch film on the LCD screen to protect it from resin spills and damage. Follow the instructions provided with the Anti-Scratch Film Kit for proper application, ensuring no bubbles are trapped underneath.
3.3 Platformnivellering
Accurate platform leveling is crucial for successful prints. Use the included leveling paper to calibrate the build platform:
- Install the build platform onto the Z-axis.
- Loosen the screws on the build platform.
- Place the leveling paper on the LCD screen.
- Lower the Z-axis until the platform gently presses against the leveling paper.
- Tighten the platform screws while maintaining pressure on the paper.
- Raise the Z-axis and remove the leveling paper.
Image 3.1: Illustration of the build platform leveling procedure using the provided leveling paper.
4. Betjeningsvejledning
4.1 Basic Printing Process
- Prepare Your Model: Use a compatible slicing software (e.g., Anycubic Photon Workshop, Chitubox, Lychee) to prepare your 3D model. This involves adding supports, orienting the model, and slicing it into layers. Save the sliced file to the provided USB drive.
- Pour Resin: Ensure the resin vat is clean and securely installed. Carefully pour the desired resin into the vat, ensuring it does not exceed the maximum fill line. Always wear gloves when handling resin.
- Indsæt USB-drev: Indsæt USB-drevet, der indeholder dine skiver file ind i printerens USB-port.
- Select and Print: Navigate the printer's touchscreen interface to select your file. Confirm print settings and initiate the printing process.
- Overvåg fremskridt: The printer's intelligent detection features can monitor the printing process.
- Efterbehandling: Once printing is complete, carefully remove the build platform. Use the scrapers to detach the printed model. Wash the model with isopropyl alcohol (IPA) to remove uncured resin, then cure it under UV light.
4.2 Nøglefunktioner og teknologier
- 10K High Precision: The 7-inch 10K monochrome screen (9024x5120 resolution) with 17x17µm XY axis pixels delivers exceptional detail.
- Hurtig udskrivningshastighed: Achieves a maximum print speed of 120mm/h with the new generation ACF film and Intelligent Release Algorithm.
- Advanced COB Light Source: The COB light source system combined with Fresnel lenses ensures light uniformity (≥90%) and minimizes stray light interference for consistent printing accuracy (±0.01-0.05mm accuracy error).
- Intelligent detektion: Features include printer auto-inspection, residual resin detection, leftover resin monitoring, failed print detection, and intelligent lifespan management to reduce errors and improve efficiency.
- User-friendly Touchscreen: A 4.3-inch high-definition screen with a new UI design supports 8 languages for intuitive operation.
Image 4.1: The 7-inch 10K screen offers high precision for detailed prints.
Image 4.2: Comparison of printing speeds for standard and high-speed resins.
Image 4.3: The advanced COB light source ensures uniform light distribution.
Image 4.4: The printer's intelligent detection system provides comprehensive monitoring.
Image 4.5: The 4.3-inch HD touchscreen supports 8 languages for ease of use.
4.3 Software og tilslutningsmuligheder
- Anycubic Photon Workshop: The dedicated slicing software for preparing your models. It supports automated support generation, customizable support optimization, and smooth layer transitions.
- Third-Party Slicers: The Photon Mono 4 Ultra is compatible with other popular slicing software like Chitubox and Lychee.
- Anycubic APP & Cloud Printing: Download the Anycubic App to initiate print tasks remotely via the cloud. The app also provides a cloud-based printing parameter library with recommended settings for various resins.
- Forbindelse: Supports network printing via PC and APP, as well as offline printing via USB.
Image 4.6: Anycubic Photon Workshop software for model preparation.
Image 4.7: The Anycubic App allows for multi-device sync-up and cloud printing.
5. Vedligeholdelse
5.1 Rengøring af printeren
- Harpiksfad: After each print, or if changing resin types, clean the resin vat. Carefully pour any remaining resin back into its bottle using a funnel and filter. Clean the vat with IPA and a soft cloth. Avoid scratching the FEP film.
- Build Platform: Clean the build platform with IPA after removing prints. Ensure no cured resin remains on the surface.
- LCD skærm: If resin spills onto the LCD screen, immediately clean it with a soft cloth and IPA. Do not use sharp objects to scrape off cured resin.
- Printer Exterior: Wipe down the printer's exterior with a soft, dry cloth.
5.2 FEP Film Care
The FEP (Fluorinated Ethylene Propylene) film in the resin vat is a consumable part. It is delicate and can be scratched or pierced. Always use the recommended plastic spatula for removing prints from the build plate to avoid damaging the FEP film. If the film is damaged, it must be replaced to prevent resin leakage and print failures. Replacement FEP film kits are available from ANYCUBIC.
5.3 Resin Handling and Storage
- Always wear appropriate personal protective equipment (gloves, safety glasses) when handling resin.
- Store resin in its original opaque bottle in a cool, dark place, away from direct sunlight and heat.
- Do not dispose of liquid resin down drains. Cure liquid resin under UV light until solid before disposing of it as solid waste.
6. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på under drift.
6.1 Print Failures
- Models not sticking to build plate: Ensure the build plate is properly leveled. Increase bottom exposure time in your slicer settings. Check ambient temperature; resin prints best in warmer conditions.
- Partial prints or missing layers: Check the FEP film for damage or cloudiness. Ensure the resin is well-mixed and not expired. Verify exposure settings in your slicer.
- Residue warnings: If you receive residue warnings even after cleaning, try performing a screen exposure test to clear any cured resin on the LCD.
6.2 Forbindelsesproblemer
- USB drive not recognized: Ensure the USB drive is formatted correctly (FAT32 is typically required). Try a different USB drive. Some users have reported issues with certain USB drives; using the one provided with the printer is recommended.
- Mobile app connection issues: Verify your printer and mobile device are on the same network. Ensure the app is updated to the latest version. Check for any firewall or network restrictions.
6.3 Generel drift
- Strong resin odor: Resin printing produces odors. Ensure the printer is in a well-ventilated area. Consider using an enclosure with a filter if odor is a concern.
7. Specifikationer
| Feature | Specifikation |
|---|---|
| Model | Photon Mono 4 Ultra |
| Udskrivningsteknologi | LCD-based SLA (Resin 3D Printer) |
| Byggevolumen (LWH) | 153.4 x 87 x 165 mm (6.04'' x 3.42'' x 6.49'') |
| Skærmstørrelse | 7-tommer monokrom |
| Opløsning | 10K (9024 x 5120 pixels) |
| XY-akseopløsning | 17 x 17 µm |
| Lyskilde | COB Light Source with Fresnel Lens |
| Light Uniformity | ≥90 % |
| Accuracy Error | ±0.01-0.05mm |
| Max udskrivningshastighed | 120 mm/h (with High Speed Resin 2.0) |
| Printer dimensioner | 15 x 10 x 20 tommer |
| Varens vægt | 8.8 pund (4 kilo) |
| Materiale | ABS, Aluminum, Polycarbonate |
| Brugergrænseflade | 4.3-inch HD Touchscreen, 8 languages |
| Forbindelse | USB, Wi-Fi (App/Cloud Printing) |
Image 7.1: The generous build volume of the Photon Mono 4 Ultra.
8. Garanti og support
8.1 Garantioplysninger
For detailed warranty terms and conditions, please refer to the official ANYCUBIC website or contact customer support. Warranty coverage typically includes manufacturing defects and may vary by region.
8.2 Kundesupport
If you encounter any issues or have questions not covered in this manual, please contact ANYCUBIC customer support. You can find contact information and additional resources on the official ANYCUBIC webhjemmeside eller via deres Amazon-butiksside:
- ANYCUBIC Official Store: Visit the ANYCUBIC Store on Amazon
